We previously took an EVP_KEYMGMT pointer, but now found it necessary
to use a different import function in some cases. Since that's the
only thing we use from EVP_KEYMGMT, we might as well pass the import
function directly, allowing for some flexibility in how export_to is
used.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15293)
Almost all were notes about wanting to deprecate CTRLs/utility functions.
Fixes#15325
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15328)
The low-level engine and app method based keys have to be treated
as foreign and must be used with old legacy pmeths.
Fixes#14632
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14859)
To avoid mutating key data add OSSL_FUNC_KEYMGMT_DUP function
to the provider API and implement it for all asym-key key
managements.
Use it when copying everything to an empty EVP_PKEY
which is the case with EVP_PKEY_dup().
Fixes#14658
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14793)
In 1.1.1 the ctrl EVP_PKEY_CTRL_RSA_KEYGEN_BITS would fail immediately
if the number of bits was too small. In 3.0 it always succeeds, and only
fails later during the key generation stage.
We fix that so that it fails early like it used to in 1.1.1.
Note that in 1.1.1 it fails with a -2 return code. That is not the case
in 3.0 and has not been addressed here (see #14442)
Fixes#14443
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14702)
The legacy implementation would print the ASN.1 value of the trailerfield,
except when it wasn't set (i.e. is default).
For better consistency, we now always print the ASN.1 value, both in the
legacy and the provided implementation.
Fixes#14363
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14676)
with AVX512_IFMA + AVX512_VL instructions, primarily for RSA CRT private key
operations. It uses 256-bit registers to avoid CPU frequency scaling issues.
The performance speedup for RSA2k signature on ICL is ~2x.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13750)
This required refactoring a number of functions from the diverse
EVP_PKEY_ASN1_METHOD implementations to become shared backend
functions. It also meant modifying a few of them to return pointers
to our internal RSA / DSA/ DH / EC_KEY, ... structures instead of
manipulating an EVP_PKEY pointer directly, letting the caller do the
latter.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
CLA: trivial
On line 136, a period is added. I think this is what was intended.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14540)
Fixes#14390
The only caller of this function tests EVP_KEYMGMT_is_a() beforehand
which will fail if the RSA key types do not match. So the test is not
necessary. The assert has been removed when it does the test.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14524)
Some functions that lock things are void, so we just return early.
Also make ossl_namemap_empty return 0 on error. Updated the docs, and added
some code to ossl_namemap_stored() to handle the failure, and updated the
tests to allow for failure.
Fixes: #14230
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14238)
Fixes#13995
For small keys the MR test on the modulus can return
BN_PRIMETEST_COMPOSITE_WITH_FACTOR status although the modulus
is correct.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14389)
This also fixes the public function RSA_padding_check_SSLv23.
Commit 6555a89 changed the padding check logic in RSA_padding_check_SSLv23
so that padding is rejected if the nul delimiter byte is not immediately
preceded by at least 8 bytes containing 0x03. Prior to that commit the
padding is rejected if it *is* preceded by at least 8 bytes containing 0x03.
Presumably this change was made to be consistent with what it says in
appendix E.3 of RFC 5246. Unfortunately that RFC is in error, and the
original behaviour was correct. This is fixed in later errata issued for
that RFC.
This has no impact on libssl for modern versions of OpenSSL because
there is no protocol support for SSLv2 in these versions. However
applications that call RSA_paddin_check_SSLv23 directly, or use the
RSA_SSLV23_PADDING mode may still be impacted. The effect of the original
error is that an RSA message encrypted by an SSLv2 only client will fail to
be decrypted properly by a TLS capable server, or a message encrypted by a
TLS capable client will fail to decrypt on an SSLv2 only server. Most
significantly an RSA message encrypted by a TLS capable client will be
successfully decrypted by a TLS capable server. This last case should fail
due to a rollback being detected.
Thanks to D. Katz and Joel Luellwitz (both from Trustwave) for reporting
this issue.
CVE-2021-23839
Reviewed-by: Paul Dale <pauli@openssl.org>
Fixes CID #1472393
Previously this switch handled CMS & PCKS7 controls (e.g ANS1_PKEY_CTRL_PKCS7_SIGN)
which fell thru to the dead code to set the X509_ALG.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14163)
Using ERR_LIB_* causes the error output to say 'reason(n)' instead of
the name of the sub-library in question.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14152)
Fixes#13969
- properly handle the mandatory RSA-PSS key parameters
- improve parameter checking when setting the parameters
- compute the algorithm id at the time it is requested so it
reflects the actual parameters set
- when generating keys do not override previously set parameters
with defaults
- tests added to the test_req recipe that should cover the PSS signature
handling
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13988)
This commit attempts to fix the an issue when generating a key of type
EVP_PKEY_RSA_PSS. Currently, EVP_PKEY_CTX_set_rsa_keygen_bits will
return -1 if the key id is not of type EVP_PKEY_RSA. This commit adds
EVP_PKEY_RSA_PSS to also be accepted.
The macro EVP_PKEY_CTX_set_rsa_pss_keygen_md si converted into a
function and it is now called in legacy_ctrl_to_param.
Fixes#12384
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13099)
Because decoders are coupled with keymgmts from the same provider,
ours need to produce provider side keys the same way. Since our
keymgmts create key data with the provider library context, so must
our decoders.
We solve with functions to adjust the library context of decoded keys,
and use them.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13661)
This includes error reporting for libcrypto sub-libraries in surprising
places.
This was done using util/err-to-raise
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13318)
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
Low level algorithm implementations have no business knowing about details
of the higher level CMS concept. This knowledge is therefore moved into the
CMS layer.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13088)
There is a large amount of CMS sepcific code in the algorithms. This is in
the wrong place and breaks layering. This code should be in the CMS layer.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13088)
There is quite a large amount of algorithm specific CMS code sitting in
the algorithm directories. However, this seems to break layering.
Algorithms really have no business knowing anything about CMS. Really it
should be the other way around. Where there is algorithm specific CMS code
it is the CMS layer that should know how to handle different algorithms.
Therefore we move this code into the CMS layer.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13088)
