For TLSv1.3, limit ticket lifetime hint to 1 week per RFC8446
Fixes#17948
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17952)
Provide a different mechanism to indicate that the application wants
to retry the verification. The negative result of the callback function
now indicates an error again.
Instead the SSL_set_retry_verify() can be called from the callback
to indicate that the handshake should be suspended.
Fixes#17568
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17825)
This is needed for TLS-1.3.
Also add check for uncompressed point format for ECDHE as
the other formats are not allowed by RFC 8446.
Fixes#17667
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17678)
For platforms that do not have native TSAN support, locking needs to be used
instead. This adds the locking.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17489)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17528)
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17412)
In the event that X509_verify() returned an internal error result then
libssl would mishandle this and set rwstate to SSL_RETRY_VERIFY. This
subsequently causes SSL_get_error() to return SSL_ERROR_WANT_RETRY_VERIFY.
That return code is supposed to only ever be returned if an application
is using an app verify callback to complete replace the use of
X509_verify(). Applications may not be written to expect that return code
and could therefore crash (or misbehave in some other way) as a result.
CVE-2021-4044
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16918)
Normally we expect a client to send new extensions in the ClientHello,
which may be echoed back by the server in subsequent messages. However the
server can also send a new extension in the certificate request message to
be echoed back in a certificate message
Fixes#16632
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16634)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16671)
The `sk` variable is assigned to `s->session->peer_chain`.
If `ssl3_digest_cached_records()` were to fail, then `sk` would still be
non-NULL, and subsequently freed on the error return. When the session
is freed, it will then attempt to free `s->session->peer_chain`,
resulting in a double-free (of `sk`).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16309)
We received a report of an "excessive message size" for a received
session ticket. Our maximum size was significantly less than the theoretical
maximum. The server may put any data it likes in the session ticket
including (for example) the full certificate chain so we should be able to
handle longer tickets. Update the value to the maximum allowed by the spec.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15877)
Sort SSL_SESSION structures by timeout in the linked list.
Iterate over the linked list for timeout, stopping when no more
session can be flushed.
Do SSL_SESSION_free() outside of SSL_CTX lock
Update timeout upon use
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8687)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
Otherwise, the state machine ends up being in a bad state:
```
SSL routines:write_state_machine:missing fatal:ssl/statem/statem.c:XXX:
```
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/15487)
Add -client_renegotiation flag support. The -client_renegotiation flag is
equivalent to SSL_OP_ALLOW_CLIENT_RENEGOTIATION. Add support to the app,
the config code, and the documentation.
Add SSL_OP_ALLOW_CLIENT_RENEGOTIATION to the SSL tests. We don't need to
always enable it, but there are so many tests so this is the easiest thing
to do.
Add a test where client tries to renegotiate and it fails as expected. Add
a test where server tries to renegotiate and it succeeds. The second test
is supported by a new flag, -immediate_renegotiation, which is ignored on
the client.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15184)
It can be useful to know what group was used for the handshake's
key exchange process even on non-TLS 1.3 connections. Allow this
API, new in OpenSSL 3.0.0, to be used on other TLS versions as well.
Since pre-TLS-1.3 key exchange occurs only on full handshakes, this
necessitates adding a field to the SSL_SESSION object to carry the
group information across resumptions. The key exchange group in the
SSL_SESSION can also be relevant in TLS 1.3 when the resumption handshake
uses the "psk_ke" key-exchange mode, so also track whether a fresh key
exchange was done for TLS 1.3.
Since the new field is optional in the ASN.1 sense, there is no need
to increment SSL_SESSION_ASN1_VERSION (which incurs strong incompatibility
churn).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14750)
TLS 1.3 allows for the "psk_ke" and "psk_dhe_ke" key-exchange modes.
Only the latter mode introduces a new ephemeral (Diffie-Hellman)
key exchange, with the PSK being the only key material used in the
former case.
It's a compliance requirement of RFC 8446 that the server MUST NOT
send a KeyShareEntry when using the "psk_ke" mode, but prior to
this commit we would send a key-share based solely on whether the
client sent one. This bug goes unnoticed in our internal test suite
since openssl communicating with openssl can never negotiate the
PSK-only key-exchange mode. However, we should still be compliant
with the spec, so check whether the DHE mode was offered and don't
send a key-share if it wasn't.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14749)
It's a MUST-level requirement that if the client sends a pre_shared_key
extension not accompanied by a psk_key_exchange_modes extension, the
server must abort the handshake. Prior to this commit the server
would continue on.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14749)
In TLS we process received messages like this:
1) Read Message Header
2) Validate and transition state based on received message type
3) Read Message Body
4) Process Message
In DTLS we read messages like this:
1) Read Message Header and Body
2) Validate and transition state based on received message type
3) Process Message
The difference is because of the stream vs datagram semantics of the
underlying transport.
In both TLS and DTLS we were doing finished MAC processing as part of
reading the message body. This means that in DTLS this was occurring
*before* the state transition has been validated. A crash was occurring
in DTLS if a Finished message was sent in an invalid state due to
assumptions in the code that certain variables would have been setup by
the time a Finished message arrives.
To avoid this problem we shift the finished MAC processing to be after
the state transition in DTLS.
Thanks to github user @bathooman for reporting this issue.
Fixes#14906
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14930)
Add a "where did this EVP_{CIPHER,MD} come from" flag: global, via fetch,
or via EVP_{CIPHER,MD}_meth_new. Update EVP_{CIPHER,MD}_free to handle all
three origins. The flag is deliberately right before some function pointers,
so that compile-time failures (int/pointer) will occur, as opposed to
taking a bit in the existing "flags" field. The "global variable" flag
is non-zero, so the default case of using OPENSSL_zalloc (for provider
ciphers), will do the right thing. Ref-counting is a no-op for
Make up_ref no-op for global MD and CIPHER objects
Deprecate EVP_MD_CTX_md(). Added EVP_MD_CTX_get0_md() (same semantics as
the deprecated function) and EVP_MD_CTX_get1_md(). Likewise, deprecate
EVP_CIPHER_CTX_cipher() in favor of EVP_CIPHER_CTX_get0_cipher(), and add
EVP_CIPHER_CTX_get1_CIPHER().
Refactor EVP_MD_free() and EVP_MD_meth_free() to call new common
evp_md_free_int() function.
Refactor EVP_CIPHER_free() and EVP_CIPHER_meth_free() to call new common
evp_cipher_free_int() function.
Also change some flags tests to explicit test == or != zero. E.g.,
if (flags & x) --> if ((flags & x) != 0)
if (!(flags & x)) --> if ((flags & x) == 0)
Only done for those lines where "get0_cipher" calls were made.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14193)
This change includes swapping the PUT and SPT configuration,
includes of sys/stat.h and sys/types.h in the correct scope
to be picked up by SPT definitions.
Fixes: #14698Fixes: #14734
CLA: The author has the permission to grant the OpenSSL Team the right to use this change.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14736)
Following on from CVE-2021-3449 which was caused by a non-zero length
associated with a NULL buffer, other buffer/length pairs are updated to
ensure that they too are always in sync.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
As the variable peer_sigalgslen is not cleared on ssl rehandshake, it's
possible to crash an openssl tls secured server remotely by sending a
manipulated hello message in a rehandshake.
On such a manipulated rehandshake, tls1_set_shared_sigalgs() calls
tls12_shared_sigalgs() with the peer_sigalgslen of the previous
handshake, while the peer_sigalgs has been freed.
As a result tls12_shared_sigalgs() walks over the available
peer_sigalgs and tries to access data of a NULL pointer.
This issue was introduced by c589c34e61 (Add support for the TLS 1.3
signature_algorithms_cert extension, 2018-01-11).
Signed-off-by: Peter Kästle <peter.kaestle@nokia.com>
Signed-off-by: Samuel Sapalski <samuel.sapalski@nokia.com>
CVE-2021-3449
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
If we have TLSv1.3 enabled then we must have at least one TLSv1.3 capable
group available. This check was not always working
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/14430)
If the EVP_MD_CTX_ctrl is deprecated the code will
generate deprecation warnings. So there is no point in marking
all EVP_MD_CTX_ctrl() calls with TODOs.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14367)
The low level DH API has two functions for checking parameters:
DH_check_ex() and DH_check_params_ex(). The former does a "full" check,
while the latter does a "quick" check. Most importantly it skips the
check for a safe prime. We're ok without using safe primes here because
we're doing ephemeral DH.
Now that libssl is fully using the EVP API, we need a way to specify that
we want a quick check instead of a full check. Therefore we introduce
EVP_PKEY_param_check_quick() and use it.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14146)
The low level SRP implementation has been deprecated with no replacement.
Therefore the libssl level APIs need to be similarly deprecated.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14132)
This field has not been used since #3858 was merged in 2017 when we
moved to a table-based lookup for certificate type properties instead of
an index-based one.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/13991)
The existing names such as EVP_PKEY_param_fromdata_settable were a bit
confusing since the 'param' referred to key params not OSSL_PARAM. To simplify
the interface a 'selection' parameter will be passed instead. The
changes are:
(1) EVP_PKEY_fromdata_init() replaces both EVP_PKEY_key_fromdata_init() and EVP_PKEY_param_fromdata_init().
(2) EVP_PKEY_fromdata() has an additional selection parameter.
(3) EVP_PKEY_fromdata_settable() replaces EVP_PKEY_key_fromdata_settable() and EVP_PKEY_param_fromdata_settable().
EVP_PKEY_fromdata_settable() also uses a selection parameter.
Fixes#12989
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14076)
The supported groups code was checking the OPENSSL_NO_EC and
OPENSSL_NO_DH guards in order to work, and the list of default groups was
based on those guards. However we now need it to work even in a no-ec
and no-dh build, because new groups might be added from providers.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
The default supported groups code was disabled in the event of a build
with no-ec and no-dh. However now that providers can add there own
groups (which might not fit into either of these categories), this is
no longer appropriate.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
This removes man unnecessary OPENSSL_NO_DH guards from libssl. Now that
libssl is entirely using the EVP APIs and implementations can be plugged
in via providers it is no longer needed to disable DH at compile time in
libssl. Instead it should detect at runtime whether DH is available from
the loaded providers.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
The client-side cert verification callback function may not only return
as usual for success or 0 for failure, but also -1,
typically on failure verifying the server certificate.
This makes the handshake suspend and return control to the calling application
with SSL_ERROR_WANT_RETRY_VERIFY.
The app can for instance fetch further certificates or cert status information
needed for the verification.
Calling SSL_connect() again resumes the connection attempt
by retrying the server certificate verification step.
This process may even be repeated if need be.
The core implementation of the feature is in ssl/statem/statem_clnt.c,
splitting tls_process_server_certificate() into a preparation step
that just copies the certificates received from the server to s->session->peer_chain
(rather than having them in a local variable at first) and returns to the state machine,
and a post-processing step in tls_post_process_server_certificate() that can be repeated:
Try verifying the current contents of s->session->peer_chain basically as before,
but give the verification callback function the chance to pause connecting and
make the TLS state machine later call tls_post_process_server_certificate() again.
Otherwise processing continues as usual.
The documentation of the new feature is added to SSL_CTX_set_cert_verify_callback.pod
and SSL_want.pod.
This adds two tests:
* A generic test in test/helpers/handshake.c
on the usability of the new server cert verification retry feature.
It is triggered via test/ssl-tests/03-custom_verify.cnf.in (while the bulky auto-
generated changes to test/ssl-tests/03-custom_verify.cnf can be basically ignored).
* A test in test/sslapitest.c that demonstrates the effectiveness of the approach
for augmenting the cert chain provided by the server in between SSL_connect() calls.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13906)
Update constant to maximum permitted by RFC 8446
Fixes#13868
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13874)
Fixes#13183
From the original issue report, before this commit, on master and on
1.1.1, the issue can be detected with the following steps:
- Start with a default SSL_CTX, initiate a TLS 1.3 connection with SNI,
"Accept" count of default context gets incremented
- After servername lookup, "Accept" count of default context gets
decremented and that of SNI context is incremented
- Server sends a "Hello Retry Request"
- Client sends the second "Client Hello", now again "Accept" count of
default context is decremented. Hence giving a negative value.
This commit fixes it by adding a check on `s->hello_retry_request` in
addition to `SSL_IS_FIRST_HANDSHAKE(s)`, to ensure the counter is moved
only on the first ClientHello.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13297)
The configuration option 'no-rsa' was dropped with OpenSSL 1.1.0, so
this is simply a cleanup of the remains.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13700)
A servername cb may change the available certificates, so if we have one
set then we cannot rely on the configured certificates to determine if we
are capable of negotiating TLSv1.3 or not.
Fixes#13291
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13304)
For the moment, we translate the result to a NID, because that's still
used in several locations in libssl. Future development should change
all the internals to be name based instead.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13436)
no-dh disables the low level API for DH. However, since we're now using
the high level EVP API in most places we don't need to disable quite so
much.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
We instead set the encoded public key directly in the EVP_PKEY object.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
We get DH related parameters directly from the EVP_PKEY instead of
downgrading to a DH object first.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
There is no need for us to downgrade the EVP_PKEY into a DH object
for this function so we rewrite things to avoid it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
These ctrls pass around a DH object which is now deprecated, so we
deprecate the ctrls themselves.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
Previously we were constructing a DH object and then assigning it to an
EVP_PKEY. Instead we construct an EVP_PKEY directly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
Previously a DH object was constructed and then assigned to an EVP_PKEY.
Instead we now construct the EVP_PKEY directly instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
Since SSLfatal() doesn't take a function code any more, we drop that
argument everywhere. Also, we convert all combinations of SSLfatal()
and ERR_add_data() to an SSLfatal_data() call.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13316)
ossl_statem_fatal() is refactored to be an extended ERR_set_error(),
and SSLfatal() is refactored to work like ERR_raise(). We also add
SSLfatal_data() to work like ERR_raise_data().
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13316)
Use SSL_R_NO_PROTOCOLS_AVAILABLE instead of ERR_R_INTERNAL_ERROR,
to match what the BoringSSL tests expect for this case.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13251)
We were missing a call to SSLfatal. A comment claimed that we had already
called it - but that is incorrect.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/13229)
We do the same thing for the "get1" version. In reality this has broader
use than just TLS (it can also be used in CMS), and "encodedpoint" only
makes sense when you are talking about EC based algorithms.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13105)
The security operation SSL_SECOP_TMP_DH is defined to take an EVP_PKEY
in the "other" parameter:
/* Temporary DH key */
# define SSL_SECOP_TMP_DH (7 | SSL_SECOP_OTHER_PKEY)
In most places this is what is passed. All these places occur server side.
However there is one client side call of this security operation and it
passes a DH object instead. This is incorrect according to the
definition of SSL_SECOP_TMP_DH, and is inconsistent with all of the other
locations.
Our own default security callback, and the debug callback in the apps,
never look at this value and therefore this issue was never noticed
previously. In theory a client side application could be relying on this
behaviour and could be broken by this change. This is probably fairly
unlikely but can't be ruled out.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/13136)
We create a new file ssl/tls_depr.c to contain functions that need to call
deprecated APIs in libssl. This enables us to remove
OPENSSL_SUPPRESS_DEPRECATED from a number of other libssl files.
The deprecated API usage is either related to ENGINEs and is needed to
continue to support applications that use such ENGINEs. Or they are needed
to support some deprecated public libssl APIs.
One other file remains in libssl that still uses deprecated APIs: s3_cbc.c
This is needed to support the deprecated SSLv3.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13135)
Automatically rename all instances of _with_libctx() to _ex() as per
our coding style.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12970)
The check is applied only with X509_V_FLAG_X509_STRICT.
Fixes#12139
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12683)
We fix 3 problems with safestack:
- Including an openssl header file without linking against libcrypto
can cause compilation failures (even if the app does not otherwise need
to link against libcrypto). See issue #8102
- Recent changes means that applications in no-deprecated builds will need
to include additional macro calls in the source code for all stacks that
they need to use - which is an API break. This changes avoids that
necessity.
- It is not possible to write code using stacks that works in both a
no-deprecated and a normal build of OpenSSL. See issue #12707.
Fixes#12707
Contains a partial fix for #8102. A similar PR will be needed for hash to
fully fix.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12781)
If we don't have MD5-SHA1 then we must be use (D)TLSv1.2 or above. We
check that this is consistent with the way we've been configured. We also
ensure that we never attempt to negotiate <(D)TLSv1.2 if MD5-SHA1 is not
available.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12733)
If a digest is not available we just get an "internal error" error
message - which isn't very helpful for diagnosing problems. Instead we
explicitly state that we couldn't find a suitable digest.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12733)
Convert various mac key creation function calls to use the _with_libctx
variants.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12637)
-Added EVP_SignFinal_with_libctx() and EVP_VerifyFinal_with_libctx()
-Renamed EVP_DigestSignInit_ex() and EVP_DigestVerifyInit_with_libctx() to
EVP_DigestSignInit_with_libctx() and EVP_DigestVerifyInit_with_libctx()
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11884)
