Reviewed-by: Neil Horman <nhorman@openssl.org>
Release: yes
(cherry picked from commit 0ce7d1f355)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24034)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/22828)
When we are clearing the sent messages queue we should ensure we free any
old write record layers that are no longer in use. Previously this logic
was in dtls1_hm_fragment_free() - but this can end up freeing the current
record layer under certain error conditions.
Fixes#22664
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22679)
if we allocate a new hm_frament in dtls1_buffer_message with
dtls1_hm_fragment_new, the returned fragment contains uninitalized data in the
msg_header field. If an error then occurs, and we free the fragment,
dtls_hm_fragment_free interrogates the msg_header field (which is garbage), and
potentially references undefined values, or worse, accidentally references
available memory that is not owned, leading to various corruptions.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22679)
Improves consistency with the QUIC rstream implementation - and improves
the abstraction between the TLS implementation and the abstract record
layer. We should not expect that the TLS implementation should be able to
change the underlying buffer. Future record layers may not expect that.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20404)
They are no longer used and can be removed.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19586)
Don't calculate the potential record layer expansion outside of the
record layer. We move some code that was doing that into the record
layer.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
We have standard functions for most of the work that dtls_write_records
does - so we convert it to use those functions instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,
there's no need to report ERR_R_MALLOC_FAILURE where they are called
directly, or when SSLfatal() and RLAYERfatal() is used, the reason
`ERR_R_MALLOC_FAILURE` is changed to `ERR_R_CRYPTO_LIB`.
There were a number of places where `ERR_R_MALLOC_FAILURE` was reported
even though it was a function from a different sub-system that was
called. Those places are changed to report ERR_R_{lib}_LIB, where
{lib} is the name of that sub-system.
Some of them are tricky to get right, as we have a lot of functions
that belong in the ASN1 sub-system, and all the `sk_` calls or from
the CRYPTO sub-system.
Some extra adaptation was necessary where there were custom OPENSSL_malloc()
wrappers, and some bugs are fixed alongside these changes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)
If we receive a ClientHello and send back a HelloVerifyRequest, we need
to be able to handle the scenario where the HelloVerifyRequest gets lost
and we receive another ClientHello with the message sequence number set to
0.
Fixes#18635
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18654)
Construction return values are no longer boolean but can return 3 different
values, so we use an enum to represent them.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18990)
Make the SSL object polymorphic based on whether this is
a traditional SSL connection, QUIC connection, or later
to be implemented a QUIC stream.
It requires adding if after every SSL_CONNECTION_FROM_SSL() call
which itself has to be added to almost every public SSL_ API call.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18612)
This fixes an internal error alert from the server and
an unexpected connection failure in the release version,
but a failed assertion and a server crash in the
debug version.
Reproduce this issue with a DTLS server/client like that:
./openssl s_server -dtls -mtu 1500
./openssl s_client -dtls -maxfraglen 512
In the debug version a crash happens in the Server now:
./openssl s_server -dtls -mtu 1500
Using default temp DH parameters
ACCEPT
ssl/statem/statem_dtls.c:269: OpenSSL internal error: Assertion failed: len == written
Aborted (core dumped)
While in the release version the handshake exceeds the
negotiated max fragment size, and fails because of this:
$ ./openssl s_server -dtls -mtu 1500
Using default temp DH parameters
ACCEPT
ERROR
4057152ADA7F0000:error:0A0000C2:SSL routines:do_dtls1_write:exceeds max fragment size:ssl/record/rec_layer_d1.c:826:
shutting down SSL
CONNECTION CLOSED
From the client's point of view the connection fails
with an Internal Error Alert:
$ ./openssl s_client -dtls -maxfraglen 512
Connecting to ::1
CONNECTED(00000003)
40B76343377F0000:error:0A000438:SSL routines:dtls1_read_bytes:tlsv1 alert internal error:ssl/record/rec_layer_d1.c:613:SSL alert number 80
and now the connection attempt fails unexpectedly.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18093)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
In TLS we process received messages like this:
1) Read Message Header
2) Validate and transition state based on received message type
3) Read Message Body
4) Process Message
In DTLS we read messages like this:
1) Read Message Header and Body
2) Validate and transition state based on received message type
3) Process Message
The difference is because of the stream vs datagram semantics of the
underlying transport.
In both TLS and DTLS we were doing finished MAC processing as part of
reading the message body. This means that in DTLS this was occurring
*before* the state transition has been validated. A crash was occurring
in DTLS if a Finished message was sent in an invalid state due to
assumptions in the code that certain variables would have been setup by
the time a Finished message arrives.
To avoid this problem we shift the finished MAC processing to be after
the state transition in DTLS.
Thanks to github user @bathooman for reporting this issue.
Fixes#14906
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14930)
Add a "where did this EVP_{CIPHER,MD} come from" flag: global, via fetch,
or via EVP_{CIPHER,MD}_meth_new. Update EVP_{CIPHER,MD}_free to handle all
three origins. The flag is deliberately right before some function pointers,
so that compile-time failures (int/pointer) will occur, as opposed to
taking a bit in the existing "flags" field. The "global variable" flag
is non-zero, so the default case of using OPENSSL_zalloc (for provider
ciphers), will do the right thing. Ref-counting is a no-op for
Make up_ref no-op for global MD and CIPHER objects
Deprecate EVP_MD_CTX_md(). Added EVP_MD_CTX_get0_md() (same semantics as
the deprecated function) and EVP_MD_CTX_get1_md(). Likewise, deprecate
EVP_CIPHER_CTX_cipher() in favor of EVP_CIPHER_CTX_get0_cipher(), and add
EVP_CIPHER_CTX_get1_CIPHER().
Refactor EVP_MD_free() and EVP_MD_meth_free() to call new common
evp_md_free_int() function.
Refactor EVP_CIPHER_free() and EVP_CIPHER_meth_free() to call new common
evp_cipher_free_int() function.
Also change some flags tests to explicit test == or != zero. E.g.,
if (flags & x) --> if ((flags & x) != 0)
if (!(flags & x)) --> if ((flags & x) == 0)
Only done for those lines where "get0_cipher" calls were made.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14193)
Since SSLfatal() doesn't take a function code any more, we drop that
argument everywhere. Also, we convert all combinations of SSLfatal()
and ERR_add_data() to an SSLfatal_data() call.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13316)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
With the removal of SSLv2, the s3 structure is always allocated, so
there is little point in having it be an allocated pointer. Collapse
the ssl3_state_st structure into ssl_st and fixup any references.
This should be faster than going through an indirection and due to
fewer allocations, but I'm not seeing any significant performance
improvement; it seems to be within the margin of error in timing.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7888)
In DTLS if we have buffered a fragment for a zero length message (e.g.
ServerHelloDone) then, when we unbuffered the fragment, we were attempting
to memcpy the contents of the fragment which is zero length and a NULL
pointer. This is undefined behaviour. We should check first whether we
have a zero length fragment.
Fixes a travis issue.
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6223)
At a couple of points in a DTLS/SCTP handshake we need to wait for a dry
event before continuing. However if an alert has been sent by the peer
then we will never receive that dry event and an infinite loop results.
This commit changes things so that we attempt to read a message if we
are waiting for a dry event but haven't got one yet. This should never
succeed, but any alerts will be processed.
Fixes#4763
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5084)
In <= TLSv1.2 a Finished message always comes immediately after a CCS
except in the case of NPN where there is an additional message between
the CCS and Finished. Historically we always calculated the Finished MAC
when we processed the CCS. However to deal with NPN we also calculated it
when we receive the Finished message. Really this should only have been
done if we hand negotiated NPN.
This simplifies the code to only calculate the MAC when we receive the
Finished. In 1.1.1 we need to do it this way anyway because there is no
CCS (except in middlebox compat mode) in TLSv1.3.
Coincidentally, this commit also fixes the fact that no-nextprotoneg does
not currently work in master.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5285)
Move the definition of ossl_assert() out of e_os.h which is intended for OS
specific things. Instead it is moved into internal/cryptlib.h.
This also changes the definition to remove the (int) cast.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4073)
We are quite inconsistent about which alerts get sent. Specifically, these
alerts should be used (normally) in the following circumstances:
SSL_AD_DECODE_ERROR = The peer sent a syntactically incorrect message
SSL_AD_ILLEGAL_PARAMETER = The peer sent a message which was syntactically
correct, but a parameter given is invalid for the context
SSL_AD_HANDSHAKE_FAILURE = The peer's messages were syntactically and
semantically correct, but the parameters provided were unacceptable to us
(e.g. because we do not support the requested parameters)
SSL_AD_INTERNAL_ERROR = We messed up (e.g. malloc failure)
The standards themselves aren't always consistent but I think the above
represents the best interpretation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3480)
We were allocating the write buffer based on the size of max_send_fragment,
but ignoring it when writing data. We should fragment handshake messages
if they exceed max_send_fragment and reject application data writes that
are too large.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3286)
The record layer was making decisions that should really be left to the
state machine around unexpected handshake messages that are received after
the initial handshake (i.e. renegotiation related messages). This commit
removes that code from the record layer and updates the state machine
accordingly. This simplifies the state machine and paves the way for
handling other messages post-handshake such as the NewSessionTicket in
TLSv1.3.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
Travis is reporting one file at a time shadowed variable warnings where
"read" has been used. This attempts to go through all of libssl and replace
"read" with "readbytes" to fix all the problems in one go.
Reviewed-by: Rich Salz <rsalz@openssl.org>
