TLS device offload allows to perform zerocopy sendfile transmissions.
FreeBSD provides this feature by default, and Linux 5.19 introduced it
as an opt-in. Zerocopy improves the TX rate significantly, but has a
side effect: if the underlying file is changed while being transmitted,
and a TCP retransmission happens, the receiver may get a TLS record
containing both new and old data, which leads to an authentication
failure and termination of connection. This effect is the reason Linux
makes a copy on sendfile by default.
This commit adds support for TLS zerocopy sendfile on Linux disabled by
default to avoid any unlikely backward compatibility issues on Linux,
although sacrificing consistency in OpenSSL's behavior on Linux and
FreeBSD. A new option called KTLSTxZerocopySendfile is added to enable
the new zerocopy behavior on Linux. This option should be used when the
the application guarantees that the file is not modified during
transmission, or it doesn't care about breaking the connection.
The related documentation is also added in this commit. The unit test
added doesn't test the actual functionality (it would require specific
hardware and a non-local peer), but solely checks that it's possible to
set the new option flag.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18650)
Supports Linux, MacOS and FreeBSD
Disabled by default, enabled via `enabled-tfo`
Some tests
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8692)
BIO_get_ktls_send() and BIO_get_ktls_recv() are documented as
returning either 0 or 1. However, they were actually returning the
internal value of the associated BIO flag for the true case instead of
1.
Also trim redundant ternary operators.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14023)
Instead of passing the length in from the caller, compute the length
to pass to setsockopt() inside of ktls_start(). This isolates the
OS-specific behavior to ktls.h and removes it from the socket BIO
implementations.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/12782)
This is mostly a cosmetic cleanup I missed when adding the
ktls_crypto_info_t type. However, while fixing this I noticed that
the changes to extract the size from crypto_info from the wrapper
structure for Linux KTLS had not been propagated from bss_sock.c to
bss_conn.c, so I've fixed that to use the correct length.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/12782)
The support of new algos is added by converting code to use
helper functions found in ktls.h.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11589)
If we hit an EOF while reading in libssl then we will report an error
back to the application (SSL_ERROR_SYSCALL) but errno will be 0. We add
an error to the stack (which means we instead return SSL_ERROR_SSL) and
therefore give a hint as to what went wrong.
Contains a partial fix for #10880
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10907)
- Check for the <sys/ktls.h> header to determine if KTLS support
is available.
- Populate a tls_enable structure with session key material for
supported algorithms. At present, AES-GCM128/256 and AES-CBC128/256
with SHA1 and SHA2-256 HMACs are supported. For AES-CBC, only MtE
is supported.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10045)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
Add support for Linux TLS Rx offload in the BIO layer.
Change-Id: I79924b25dd290a873d69f6c8d429e1f5bb2c3365
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
Add support for Linux TLS offload in the BIO layer
and specifically in bss_sock.c.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5253)
This commit adds comments to bio_method_st definitions where the
function pointers are defined as NULL. Most of the structs have comments
but some where missing and not all consitent.
CLA: trivial
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4881)
Since return is inconsistent, I removed unnecessary parentheses and
unified them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4541)
Remove GETPID_IS_MEANINGLESS and osslargused.
Move socket-related things to new file internal/sockets.h; this is now
only needed by four(!!!) files. Compiles should be a bit faster.
Remove USE_SOCKETS ifdef's
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4209)
* Configure: Replaced -DTERMIO by -DTERMIOS in CFLAGS.
* crypto/bio/bss_dgram.c [WATT32]: Remove obsolete redefinition of
function names: sock_write, sock_read and sock_puts.
* crypto/bio/bss_sock.c [WATT32]: For Watt-32 2.2.11 sock_write,
sock_read and sock_puts are redefined to their private names so
their names must be undefined first before they can be redefined
again.
* crypto/bio/bss_file.c (file_fopen) [__DJGPP__]: Make a copy of the
passed file name and replace the leading dots in the dirname part
and the basname part of the file name, unless LFN is supported.
* e_os.h [__DJGPP__]: Undefine macro DEVRANDOM_EGD. Neither MS-DOS nor
FreeDOS provide 'egd' sockets.
New macro HAS_LFN_SUPPORT checks if underlying file system supports
long file names or not.
Include sys/un.h.
Define WATT32_NO_OLDIES.
* INSTALL.DJGPP: Update URL of WATT-32 library.
Submitted by Juan Manuel Guerrero <juan.guerrero@gmx.de>
RT#4217
Reviewed-by: Andy Polyakov <appro@openssl.org>
Move the the BIO_METHOD and BIO structures into internal header files,
provide appropriate accessor methods and update all internal code to use
the new accessors where appropriate.
Reviewed-by: Richard Levitte <levitte@openssl.org>
BIO_new, etc., don't need a non-const BIO_METHOD. This allows all the
built-in method tables to live in .rodata.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
There are header files in crypto/ that are used by a number of crypto/
submodules. Move those to crypto/include/internal and adapt the
affected source code and Makefiles.
The header files that got moved are:
crypto/cryptolib.h
crypto/md32_common.h
Reviewed-by: Rich Salz <rsalz@openssl.org>
PR: 338
Here's the description, submitted by Gisle Vanem <giva@bgnett.no>:
1. sock_init() renamed to ssl_sock_init() in ./apps/s_socket.c due
to name-clash with Watt-32.
2. rand() renamed to Rand() in ./crypto/bn/divtest.c due to name-clash
with <stdlib.h>
3. Added calls to dbug_init()/sock_init() in some demo programs.
4. Changed cflags/lflags in configure. Watt-32 install root now taken
from $WATT_ROOT.
sure they are available in opensslconf.h, by giving them names starting
with "OPENSSL_" to avoid conflicts with other packages and by making
sure e_os2.h will cover all platform-specific cases together with
opensslconf.h.
I've checked fairly well that nothing breaks with this (apart from
external software that will adapt if they have used something like
NO_KRB5), but I can't guarantee it completely, so a review of this
change would be a good thing.
designed for that. This removes the potential error to mix data and
function pointers.
Please note that I'm a little unsure how incorrect calls to the old
ctrl functions should be handled, in som cases. I currently return 0
and that's it, but it may be more correct to generate a genuine error
in those cases.
This will soon be complemented with MacOS specific source code files and
INSTALL.MacOS.
I (Andy) have decided to get rid of a number of #include <sys/types.h>.
I've verified it's ok (both by examining /usr/include/*.h and compiling)
on a number of Unix platforms. Unfortunately I don't have Windows box
to verify this on. I really appreciate if somebody could try to compile
it and contact me a.s.a.p. in case a problem occurs.
Submitted by: Roy Wood <roy@centricsystems.ca>
Reviewed by: Andy Polyakov <appro@fy.chalmers.se>
