Only field multiplication and squaring (but not reduction) show a
significant improvement. This is enabled on Power ISA >= 3.0.
On a Power 9 CPU an average 10% performance improvement is seen (ECHDE:
14%, ECDSA sign: 6%, ECDSA verify 10%), compared to existing code.
On an upcoming Power 10 CPU we see an average performance improvement
of 26% (ECHDE: 38%, ECDSA sign: 16%, ECDSA verify 25%), compared to
existing code.
Signed-off-by: Amitay Isaacs <amitay@ozlabs.org>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15401)
This is only used if ECP_NISTP521_ASM is defined and this currently
only occurs on PPC64.
This simply chooses the C reference implementation, which will be the
default when custom code is available for certain CPUs.
Only the multiplication and squaring operations are handled, since the
upcoming assembly code only contains those. This scheme can be easily
extended to handle reduction too.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Signed-off-by: Amitay Isaacs <amitay@ozlabs.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15401)
This will allow clean addition of assembly versions of these operations.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15401)
Remove unused -DCONF_DEBUG and -DBN_CTX_DEBUG.
Rename REF_PRINT to REF_DEBUG for consistency, and add a new
tracing category and use it for printing reference counts.
Rename -DDEBUG_UNUSED to -DUNUSED_RESULT_DEBUG
Fix BN_DEBUG_RAND so it compiles and, when set, force DEBUG_RAND to
be set also.
Rename engine_debug_ref to be ENGINE_REF_PRINT also for consistency.
Fixes#15357
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15353)
The new names are ossl_err_load_xxx_strings.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15446)
Compiling under -Werror fails in gf_serialize:
crypto/ec/curve448/f_generic.c:21:27: error: argument 1 of type 'uint8_t[56]' {aka 'unsigned char[56]'} with mismatched bound [-Werror=array-parameter=]
21 | void gf_serialize(uint8_t serial[SER_BYTES], const gf x, int with_hibit)
| ~~~~~~~~^~~~~~~~~~~~~~~~~
In file included from crypto/ec/curve448/f_generic.c:12:
crypto/ec/curve448/field.h:65:28: note: previously declared as 'uint8_t *' {aka 'unsigned char *'}
void gf_serialize(uint8_t *serial, const gf x, int with_highbit);
~~~~~~~~~^~~~~~
Changed parameter to pointer to fix this warning.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15376)
We previously took an EVP_KEYMGMT pointer, but now found it necessary
to use a different import function in some cases. Since that's the
only thing we use from EVP_KEYMGMT, we might as well pass the import
function directly, allowing for some flexibility in how export_to is
used.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15293)
Using OSSL_STORE is too heavy and breaks things.
There were also needed various fixes mainly for missing proper
handling of the SM2 keys in the OSSL_DECODER.
Fixes#14788
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15045)
Add EVP_PKEY_gen(), EVP_PKEY_Q_gen(), EVP_RSA_gen(), and EVP_EC_gen().
Also export auxiliary function OSSL_EC_curve_nid2name()
and improve deprecation info on RSA and EC key generation/management functions.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14695)
In hybrid and compressed point encodings, the form octet contains a bit
of information allowing to calculate y from x. For a point on a binary
curve, this bit is zero if x is zero, otherwise it must match the
rightmost bit of of the field element y / x. The existing code only
considers the second possibility. It could thus incorrecly fail with a
division by zero error as found by Guido Vranken's cryptofuzz.
This commit adds a few explanatory comments to oct2point. The only
actual code change is in the last hunk which adds a BN_is_zero(x)
check to avoid the division by zero.
Fixes#15021
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15108)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15167)
libimplementations.a was a nice idea, but had a few flaws:
1. The idea to have common code in libimplementations.a and FIPS
sensitive helper functions in libfips.a / libnonfips.a didn't
catch on, and we saw full implementation ending up in them instead
and not appearing in libimplementations.a at all.
2. Because more or less ALL algorithm implementations were included
in libimplementations.a (the idea being that the appropriate
objects from it would be selected automatically by the linker when
building the shared libraries), it's very hard to find only the
implementation source that should go into the FIPS module, with
the result that the FIPS checksum mechanism include source files
that it shouldn't
To mitigate, we drop libimplementations.a, but retain the idea of
collecting implementations in static libraries. With that, we not
have:
libfips.a
Includes all implementations that should become part of the FIPS
provider.
liblegacy.a
Includes all implementations that should become part of the legacy
provider.
libdefault.a
Includes all implementations that should become part of the
default and base providers.
With this, libnonfips.a becomes irrelevant and is dropped.
libcommon.a is retained to include common provider code that can be
used uniformly by all providers.
Fixes#15157
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15171)
We just detect this at compile time instead.
This avoids cross-compilation problems where the host platform supports
128-bit ints, but the target platform does not (or vice versa). This was
causing a problem on some platforms where, dependent on the CFLAGS, 128 bit
ints were either supported or not.
Fixes#14804
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14941)
The low-level engine and app method based keys have to be treated
as foreign and must be used with old legacy pmeths.
Fixes#14632
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14859)
To avoid mutating key data add OSSL_FUNC_KEYMGMT_DUP function
to the provider API and implement it for all asym-key key
managements.
Use it when copying everything to an empty EVP_PKEY
which is the case with EVP_PKEY_dup().
Fixes#14658
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14793)
Signed-off-by: Amitay Isaacs <amitay@ozlabs.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14784)
Signed-off-by: Amitay Isaacs <amitay@ozlabs.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14784)
Signed-off-by: Amitay Isaacs <amitay@ozlabs.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14784)
Signed-off-by: Amitay Isaacs <amitay@ozlabs.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14784)
Signed-off-by: Amitay Isaacs <amitay@ozlabs.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14784)
Signed-off-by: Amitay Isaacs <amitay@ozlabs.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14784)
This reverts commit 7e492f3372.
This brings back the 64-bit reference implementation for curve448.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14784)
Signed-off-by: Amitay Isaacs <amitay@ozlabs.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14784)
Signed-off-by: Amitay Isaacs <amitay@ozlabs.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14784)
With strict warnings and warnings as error, openssl currently does not compile
due to a missing include.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14640)
This required refactoring a number of functions from the diverse
EVP_PKEY_ASN1_METHOD implementations to become shared backend
functions. It also meant modifying a few of them to return pointers
to our internal RSA / DSA/ DH / EC_KEY, ... structures instead of
manipulating an EVP_PKEY pointer directly, letting the caller do the
latter.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
The TODO described a case where a legacy derive operation is called, but
the peer key is provider based. In practice this will almost never be a
problem. We should never end up in our own legacy EVP_PKEY_METHOD
implementations if no ENGINE has been configured. If an ENGINE has been
configured then we we will be using a third party EVP_PKEY_METHOD
implementation and public APIs will be used to obtain the key data from the
peer key so there will be no "reaching inside" the pkey.
There is a theoretical case where a third party ENGINE wraps our own
internal EVP_PKEY_METHODs using EVP_PKEY_meth_find() or
EVP_PKEY_meth_get0(). For these cases we just ensure all our
EVP_PKEY_METHODs never reach "inside" the implementation of a peer key. We
can never assume that it is a legacy key.
Fixes#14399
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14555)
OTC have decided that the EVP_PKEY_get0* functions should have a const
return type. This is a breaking change to emphasise that these values
should be considered as immutable.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14319)
We can try to do that although for legacy keys the keymgmt
will not be set. This function will disappear with legacy support
removed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14404)
Partial fix for #12964
This adds ossl_ names for the following symbols:
ec_*, ecx_*, ecdh_*, ecdsa_*, sm2_*
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14231)
Adding the EVP_PKEY_param_check_quick() reminded me that there are also
partial checks for public keys as part of SP800-56A for FFC (DH named safe
prime groups) and ECC. The code was mainly already there and just needed
to be plumbed into the validate methods.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14206)
The default was OPENSSL_EC_NAMED_CURVE, but that's not true until a
curve name has been set, so we change the initial value to
OPENSSL_EC_EXPLICIT_CURVE and let EC_GROUP_set_curve_name() change it
to OPENSSL_EC_NAMED_CURVE.
Submitted by Matt Caswell
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13973)
Co-author: Richard Levitte <levitte@openssl.org>
Co-author: Tomas Mraz <tmraz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13139)
In some edge cases BN_CTX_end was being called without first calling
BN_CTX_start. This creates a situation where the state of the big
number allocator is corrupted and may lead to crashes.
Fixes#13812
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13813)
Because decoders are coupled with keymgmts from the same provider,
ours need to produce provider side keys the same way. Since our
keymgmts create key data with the provider library context, so must
our decoders.
We solve with functions to adjust the library context of decoded keys,
and use them.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13661)
EVP_PKEY_CTX_set_ec_ functions were only available when EC was enabled
('no-ec' not configured). However, that makes it impossible to use
these functions with an engine or a provider that happens to implement
EC_KEY. This change solves that problem by shuffling these functions
to more appropriate places.
Partially fixes#13550
squash! EVP_PKEY & EC_KEY: Make EC EVP_PKEY_CTX parameter ctrls / setters more available
By consequence, there are a number of places where we can remove the
check of OPENSSL_NO_EC. This requires some re-arrangements of
internal tables to translate between numeric identities and names.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13589)
Fixes#10366
The one place that actually used was in the legacy printing of ecparams.
This has been replaced by the pointtobuf variant.
The ecparam app was using one of these functions - this line has just been
removed as another PR will remove all the code generated lines..
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13294)
This is not done absolutely everywhere, as there are places where
the use of ERR_add_error_data() is quite complex, but at least the
simple cases are done.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13318)
This includes error reporting for libcrypto sub-libraries in surprising
places.
This was done using util/err-to-raise
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13318)
Currently, when configuring OpenSSL using -DREF_PRINT the following
compilation error is generated:
In file included from include/crypto/ecx.h:21,
from crypto/ec/ecx_key.c:11:
crypto/ec/ecx_key.c: In function 'ecx_key_free':
crypto/ec/ecx_key.c:65:32: error: 'r' undeclared
(first use in this function)
65 | REF_PRINT_COUNT("ECX_KEY", r);
| ^
include/internal/refcount.h:169:40: note: in definition of macro
'REF_PRINT_COUNT'
169 | fprintf(stderr, "%p:%4d:%s\n", b, b->references, a)
| ^
crypto/ec/ecx_key.c:65:32: note: each undeclared identifier is reported
only once for each function it appears in
65 | REF_PRINT_COUNT("ECX_KEY", r);
| ^
include/internal/refcount.h:169:40: note: in definition of macro
'REF_PRINT_COUNT'
169 | fprintf(stderr, "%p:%4d:%s\n", b, b->references, a)
| ^
make[1]: *** [Makefile:14929: crypto/ec/libcrypto-lib-ecx_key.o] Error 1
This commit updates the argument passed in to be the ECX_KEY* key.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13298)
This change makes the naming more consistent, because three different terms
were used for the same thing. (The term libctx was used by far most often.)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
Low level algorithm implementations have no business knowing about details
of the higher level CMS concept. This knowledge is therefore moved into the
CMS layer.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13088)
There is a large amount of CMS sepcific code in the algorithms. This is in
the wrong place and breaks layering. This code should be in the CMS layer.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13088)
There is quite a large amount of algorithm specific CMS code sitting in
the algorithm directories. However, this seems to break layering.
Algorithms really have no business knowing anything about CMS. Really it
should be the other way around. Where there is algorithm specific CMS code
it is the CMS layer that should know how to handle different algorithms.
Therefore we move this code into the CMS layer.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13088)
Automatically rename all instances of _with_libctx() to _ex() as per
our coding style.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12970)
Also adds error output tests on loading key files with unsupported algorithms to 30-test_evp.t
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13023)
Fix this error:
crypto/ec/ecp_nistz256-armv4.S:3853: Error: bad arguments to instruction -- `orr r11,r10'
crypto/ec/ecp_nistz256-armv4.S:3854: Error: bad arguments to instruction -- `orr r11,r12'
crypto/ec/ecp_nistz256-armv4.S:3855: Error: bad arguments to instruction -- `orrs r11,r14'
CLA: trivial
Fixes#12848
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
GH: #12854
This was written before the ec key contained a library context,
now that it contains a libctx it can be passed correctly to the callback.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12877)
The function returns 1 when the encoding of a decoded EC key used
explicit encoding of the curve parameters.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12683)
Those functions were located in the EC files, but is really broader
than that, even thought currently only used for SM2. They should
therefore be in a more central location, which was also indicated by
diverse TODOs.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12789)
They get called "delayed parameters" because they may make it to the
implementation at a later time than when they're given.
This currently only covers the distinguished ID, as that's the only
EVP_PKEY operation parameter so far that has been possible to give
before the operation has been initialized.
This includes a re-implementation of EVP_PKEY_CTX_set1_id(),
EVP_PKEY_CTX_get1_id(), and EVP_PKEY_CTX_get1_id_len().
Also, the more rigorous controls of keytype and optype are restored.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12789)
In EC_GROUP_new_from_params(), ERR_R_EC_LIB was reported if
group_new_from_name() returned NULL. However, this shadows a possible
EC_R_INVALID_CURVE, making that harder to detect, which happens to be
important to do in test/evp_test.c.
This also extends key_unsupported() in test/evp_test.c to check for
this error alongside the check for EC_R_UNKNOWN_GROUP.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12587)
For example, FreeBSD prepends "FreeBSD" to version string, e.g.,
FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git llvmorg-11.0.0-rc2-0-g414f32a9e86)
Target: x86_64-unknown-freebsd13.0
Thread model: posix
InstalledDir: /usr/bin
This prevented us from properly detecting AVX support, etc.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/12725)
This was added for backward compatability.
Added EC_GROUP_new_from_params() that supports explicit curve parameters.
This fixes the 15-test_genec.t TODO.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12604)
Just like d2i_PrivateKey() / d2i_PrivateKey_ex(), there's a need to
associate an EVP_PKEY extracted from a PUBKEY to a library context and
a property query string. Without it, a provider-native EVP_PKEY can
only fetch necessary internal algorithms from the default library
context, even though an application specific context should be used.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12671)
Changed many tests so they also test fips (and removed 'availablein = default' from some tests).
Seperated the monolithic evppkey.txt file into smaller maintainable groups.
Changed the availablein option so it must be first - this then skips the entire test before any fetching happens.
Changed the code so that all the OPENSSL_NO_XXXX tests are done in code via methods such as is_cipher_disabled(alg),
before the fetch happens.
Added missing libctx's found by adding a libctx to test_evp.
Broke up large data files for cipher, kdf's and mac's into smaller pieces so they no longer need 'AvailableIn = default'
Added missing algorithm aliases for cipher/digests to the providers.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12236)
The commit claimed to make things more consistent. In fact it makes it
less so. Revert back to the previous namig convention.
This reverts commit 765d04c946.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12186)
The following built-in curves do not have an assigned OID:
- Oakley-EC2N-3
- Oakley-EC2N-4
In general we shouldn't assume that an OID is always available.
This commit detects such cases, raises an error and returns appropriate
return values so that the condition can be detected and correctly
handled by the callers, when serializing EC parameters or EC keys with
the default `ec_param_enc:named_curve`.
Fixes#12306
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12313)
Creating an EC public key from the private key uses random numbers
internally, which require use of the proper libtx. Therefore we make
sure the libctx is used during this operation.
Fixes#12150
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12159)
Renames some "new_ex" functions to "new_with_libctx" and ensures that we
pass around the libctx AND the propq everywhere.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12159)
We rename these function to EVP_PKEY_CTX_get_group_name and
EVP_PKEY_CTX_set_group_name so that they can be used for other algorithms
other than EC.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
