Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20727)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20727)
Also add missing getter functionss OSSL_CMP_{CTX,HDR}_get0_geninfo_ITAVs() to CMP API.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21281)
HPE has a weird preference to prefix letters and zero-padding. Properly trim
them before processing.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22891)
In 160f48941d I made L_ENDIAN defined when the system is guessed to be
linux64-loongarch64. Unfortunately now I found it problematic:
1. This should be added into Configurations/10-main.conf, not here.
Having it here causes a different configuration when
linux64-loongarch64 is explicitly specified than guessed.
2. With LTO enabled, this causes many test failures on
linux64-loongarch64 due to #12247.
So I think we should remove it for now (master and 3.2 branch), and
reintroduce it to Configurations/10-main.conf when we finally sort
out #12247.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22812)
VSI C on OpenVMS for x86_64 has a bit more information than on other
hardware. This is no doubt because it's based on LLVM which leaves an
opening for cross compilation.
VSI C on Itanium:
$ CC/VERSION
VSI C V7.4-001 on OpenVMS IA64 V8.4-2L3
VSI C on x86_64:
$ CC/VERSION
VSI C x86-64 X7.4-843 (GEM 50XB9) on OpenVMS x86_64 V9.2-1
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22792)
libabigail is currenly only validating symbol presence and version
information in ci. We should also be validating function parameters,
types, etc. To do this we need to build the library with -g so the
dwarf information is available for libabigail to interrogate
while we're at it, also add a script to re-generate the xml that abidiff
uses for comparison during ci runs, to make updates easier
Fixes#22712
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22713)
CMake's older package finder, FindOpenSSL.cmake, does a best guess effort
and doesn't always get it right.
By CMake's own documentation, that's what such modules are (best effort
attempts), and package producers are (strongly) encouraged to help out by
producing and installing <PackageName>Config.cmake files to get a more
deterministic configuration.
The resulting OpenSSLConfig.cmake tries to mimic the result from CMake's
FindOpenSSL.cmake, by using the same variable and imported target names.
It also adds a few extra variables of its own, such as:
OPENSSL_MODULES_DIR Indicates the default installation directory
for OpenSSL loadable modules, such as providers.
OPENSSL_RUNTIME_DIR Indicates the default runtime directory, where
for example the openssl program is located.
OPENSSL_PROGRAM Is the full directory-and-filename of the
openssl program.
The imported targets OpenSSL::Crypto and OpenSSL::SSL are as precisely
specified as possible, so for example, they are specified with the both the
import library and the DLL on Windows, which should make life easier on that
platform.
For the moment, one of the following must be done in your CMake project for
this CMake configuration to take priority over CMake's FindOpenSSL.cmake:
- The variable CMAKE_FIND_PACKAGE_PREFER_CONFIG must be set to true prior
to the 'find_package(OpenSSL)' call.
- The 'find_package' call itself must use the "Full Signature". If you
don't know any better, simply add the 'CONFIG' option, i.e. from this
example:
find_package(OpenSSL 3.0 REQUIRED)
to this:
find_package(OpenSSL 3.0 REQUIRED CONFIG)
Just as with the 'pkg-config' exporters, two variants of the .cmake files
are produced:
- Those in 'exporters/' are installed in the location that 'pkg-config'
itself prefers for installed packages.
- Those in the top directory are to be used when it's desirable to build
directly against an OpenSSL build tree.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20878)
The pkg-config exporters were a special hack, all in
Configurations/unix-Makefile.tmpl, and this was well and good as long
as that was the only main package interface configuration system that we
cared about.
Things have changed, though, so we move the pkg-config production to be
templatable in a more flexible manner. Additional templates for other
interface configuration systems can then be added fairly easily.
Two variants of the .pc files are produced:
- Those in 'exporters/' are installed in the location that 'pkg-config'
itself prefers for installed packages.
- Those in the top directory are to be used when it's desirable to build
directly against an OpenSSL build tree.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20878)
Also sync libcrypto.num and libssl.num with 3.2 branch and
fix the EVP_DigestSqueeze symbol version.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/22688)
Fixes#7894
This allows SHAKE to squeeze multiple times with different output sizes.
The existing EVP_DigestFinalXOF() API has been left as a one shot
operation. A similar interface is used by another toolkit.
The low level SHA3_Squeeze() function needed to change slightly so
that it can handle multiple squeezes. This involves changing the
assembler code so that it passes a boolean to indicate whether
the Keccak function should be called on entry.
At the provider level, the squeeze is buffered, so that it only requests
a multiple of the blocksize when SHA3_Squeeze() is called. On the first
call the value is zero, on subsequent calls the value passed is 1.
This PR is derived from the excellent work done by @nmathewson in
https://github.com/openssl/openssl/pull/7921
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21511)
In testing the quic demos, I found that the quicserver refused to start for me,
indicating an inability to bind a socket to listen on
The problem turned out to be that getaddrinfo on my system was returning
multiple entries, due to the fact that /etc/host maps the localhost host name to
both ipv4 (127.0.0.1) and ipv6 (::1), but returns the latter as an ipv4 mapped
address (specifying family == AF_INET)
It seems like the proper fix would be to modify the /etc/hosts file to not make
that mapping, and indeed that works. However, since several distribution ship
with this setup, it seems like it is worthwhile to manage it in the server code.
its also that some other application may be bound to a given address/port
leading to failure, which I think could be considered erroneous, as any failure
for the full addrinfo list in quicserver would lead to a complete failure
Fix this by modifying the create_dgram_bio function to count the number of
sockets is successfully binds/listens on, skipping any failures, and only exit
the application if the number of bound sockets is zero.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22559)
We would like to be able to log and audit the symbols we use in openssl
so that we might catch when a new platform symbols is referecned
Add such a script (just on unix platforms for now) that gathers the used
symbols not belonging to libcrypto or libssl, and compare it to a prior
known set of used symbols. Error out if a new symbol is found
Add this script to the ci workflow in CI to capture newly
introduced platform symbols
Fixes#22330
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22478)
Previously we entered an infinite loop if these things failed.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22557)
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22405)
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22247)
Rather than instantiate the private and primary DRBGs during the
selftest, instead use a test RNG. This leaves the DRBG setup
pristine and permits later replacement of the seed source despite
the very early running power up self tests.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)
We already have BIO_ADDR_dup() but in some contexts that is not sufficent.
We implement BIO_ADDR_copy() and make BIO_ADDR_dup() use it.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22164)
Add documentation for the function SSL_CONF_CTX_finish() in man3.
Fixes#22084
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22128)
Strictly speaking the previous code was still correct since BIO_set_fd
is tolerant of a NULL BIO. But this way is more clear.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21950)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21958)
Remove some entries which have been documented meanwhile.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21873)
We extend quicserver so that it can handle multiple requests with an
HTTP request on each one. If a uni-directional stream comes in we create
a uni-directional stream for the response
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21765)
Trace output of the communication with the client is dumped to stderr if
the -trace options is supplied
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21800)
This change is for feature request #21679.
Adds a couple of setters to aid with custom CRL validation.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21737)
Fixes#21623
Also do not build quicserver with no-stdio as it is a test
utility and tests are disabled with no-stdio anyway.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/21677)
This also upgrades flags similarly to the Linux configuration.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20896)
If the request comes in in multiple chunks properly keep tract of where
we are.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21578)
Now the default is linux-generic32, it's not good for loongarch64.
We can also test if the assembler supports vector instructions here and
disable asm if not.
Closes#21340.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21510)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21116)
We save the error state from the thread that encountered
a permanent error condition caused by system or internal
error to the QUIC_CHANNEL.
Then we restore it whenever we are returning to a user
call when protocol is shutdown.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21087)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
This QUIC server utility is intended for test purposes only and is expected
to be replaced in a future version of OpenSSL by s_server. At that point
it will be removed.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21204)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21190)
Constructions like $$cursor{whatever} and %$cursor{whatever} were ambiguous
in some perl versions, and it's still better to use the arrow syntax for the
way we use them, i.e. they can both be replaced with $cursor->{whatever}.
Fixes#21152Fixes#21172
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21178)
For tutorial type pages it doesn't make any sense to have a DESCRIPTION
section.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21133)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20866)
The separate file is a Perl script that generates the appropriate define
directives for inclusion in core_names.h. By having this separation it
will be possible to prebuild data structures to give faster access when
looking up parameters by name.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20935)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19231)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
We provide information about the new QUIC support related to the
msg_callback. We also document SSL_trace() which was previously missing
from the man pages.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20914)
A native x86_64 C compiler has appeared.
We preserve the previous config target with a new name to indicate that it's
for cross compilation, at least for the time being.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20983)
This script requires Universal Ctags 6.0.0 or newer.
Usage:
./util/ctags.sh [...options passed to ctags...]
Fixing #10251
Running the script in "tags" make target is suggested by
Dmitry Belyavskiy <beldmit@gmail.com>.
The falling back action for running older ctags if u-ctags 6 is not
available is suggested
by Dr. Matthias St. Pierre <matthias.st.pierre@ncp-e.com>.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20960)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20762)
Also updated the corresponding documentations.
Fixes#20710
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20745)
We have the existing functions SSL_version(), SSL_get_version() and
SSL_is_dtls(). We extend the first two to return something sensible when
using QUIC. We additionally provide the new functions SSL_is_tls() and
SSL_is_quic() to provide a mechanism to figure out what protocol we are
using.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20650)
Add support for the RFC7250 certificate-type extensions.
Alows the use of only private keys for connection (i.e. certs not needed).
Add APIs
Add unit tests
Add documentation
Add s_client/s_server support
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18185)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20204)
The mechanism was pretty tentative and wasn't well tested for diverse
situations.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20415)
In the name of consistency, make sure that this same script is used
across more platforms, in this case VMS. This removes the need for
util/local_shlib.com.in and util/unlocal_shlib.com.in, which were
under-used anyway.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20415)
Based on kubernetes controller Makefile help.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20407)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20369)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20205)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20201)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18704)
to avoid inheriting Linux's linker flags (ie -Wl,-z,defs)
now targetting OpenBSD.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13393)
Fixes#19718Fixes#19716
Added PKCS12_SAFEBAG_get1_cert_ex(), PKCS12_SAFEBAG_get1_crl_ex() and
ASN1_item_unpack_ex().
parse_bag and parse_bags now use the libctx/propq stored in the P7_CTX.
PKCS12_free() needed to be manually constructed in order to free the propq.
pkcs12_api_test.c changed so that it actually tests the libctx, propq.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19942)
This expands on some of the core type descriptions, and also makes it
easier to find the documentation for each type, at least on Unix, with
a simple call like "man OSSL_ALGORITHM".
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19842)
According to documentation [^1], the BUILD_METADATA from VERSION.dat should
be prefixed with a plus sign when used. It is given this treatment in
Configure, but not in all other scripts that use VERSION.dat directly.
This change fixes that.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/19815)
This supports all the modes, suites and export mechanisms defined
in RFC9180 and should be relatively easily extensible if/as new
suites are added. The APIs are based on the pseudo-code from the
RFC, e.g. OSS_HPKE_encap() roughly maps to SetupBaseS(). External
APIs are defined in include/openssl/hpke.h and documented in
doc/man3/OSSL_HPKE_CTX_new.pod. Tests (test/hpke_test.c) include
verifying a number of the test vectors from the RFC as well as
round-tripping for all the modes and suites. We have demonstrated
interoperability with other HPKE implementations via a fork [1]
that implements TLS Encrypted ClientHello (ECH) which uses HPKE.
@slontis provided huge help in getting this done and this makes
extensive use of the KEM handling code from his PR#19068.
[1] https://github.com/sftcd/openssl/tree/ECH-draft-13c
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17172)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19216)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19715)
FIPS 186-4 has 5 different algorithms for key generation,
and all of them rely on testing GCD(a,n) == 1 many times.
Cachegrind was showing that during a RSA keygen operation,
the function BN_gcd() was taking a considerable percentage
of the total cycles.
The default provider uses multiprime keygen, which seemed to
be much faster. This is because it uses BN_mod_inverse()
instead.
For a 4096 bit key, the entropy of a key that was taking a
long time to generate was recorded and fed back into subsequent
runs. Roughly 40% of the cycle time was BN_gcd() with most of the
remainder in the prime testing. Changing to use the inverse
resulted in the cycle count being 96% in the prime testing.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19578)
Removed fields from missingcrypto.txt that are no longer missing.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19692)
When header files happen to have \r\n at line end, prevent hick-ups like:
Unmatched parentheses at include/openssl/asn1.h line 520
make[1]: *** [Makefile:4757: util/libcrypto.num] Error 255
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:3387: build_sw] Error 2
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19686)
The SSL3 prefix no longer seems appropriate. We choose TLS_RL_RECORD instead
of TLS_RECORD because that type already exists elsewhere.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19586)
The SSL3 prefix no longer seems appropriate.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19586)
These functions pass a library content and prop query.
The i2d documentation related to these functions has been corrected since the bio and fp functions always return 0 or 1.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18427)
The FIPS 140-3 DSA and ECDSA tests need to be known answer tests which means
the entropy needs to be cooked. This permits this.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19510)
Use the normal OPENSSL_NO_ prefix to enable/disable ZLIB
Make `BIO_f_zlib()` always available.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18186)
Some primitives are designed to be used in a multi-threaded environment,
if supported, e.g., Argon2.
This patch adds support for preemptive threading and basic synchronization
primitives for platforms compliant with POSIX threads or Windows CRT.
Native functions are wrapped to provide a common (internal) API.
Threading support can be disabled at compile time. If enabled, threading
is disabled by default and needs to be explicitly enabled by the user.
Thread enablement requires an explicit limit on the number of threads that
OpenSSL may spawn (non-negative integer/infinity). The limit may be changed.
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12255)
Partially revamped from #16712
- fall thru -> fall through
- time stamp -> timestamp
- host name -> hostname
- ipv6 -> IPv6
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19059)
OPENSSL_strcasecmp() and OPENSSL_strncasecmp() appeared in OpenSSL 3.0.3,
and were assigned numbers in util/libcrypto.num. These numbers must be
transported up to the master branch as long as development of OpenSSL 3.x
is going on there (as indicated by the version info found in VERSION.dat).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/19357)
3.1 has been decided to be a FIPS 140-3 release, springing from the branch
openssl-3.0, and the master branch to continue with the development of
OpenSSL 3.2.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19350)
ossl_sleep() was implemented as a static inline function in internal/e_os.h,
using usleep() on Unix and Sleep() on Windows. So far well and good.
However, it also has a fallback implementation for systems that do not have
usleep() or Sleep(), and that implementation happens to use ossl_time_now(),
which is a normal function, private to libcrypto, and is judged to be too
complex to sanely make into a static inline function.
This fallback creates a problem, because we do use ossl_sleep() in apps/ and
a few test programs in test/, and when they are linked with libcrypto in
shared library form, ossl_time_now() can't be found, since it's not publicly
exposed.
Something needs to give, and the easiest, and hopefully sanest answer is to
make ossl_sleep() a publicly exposed function, which requires a slight name
change.
Documentation and 'make update' result included.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19330)
Engines lacked the possibility to refer to themselves in this form:
WHATEVERerr(WHATEVER_F_SOMETHING, WHATEVER_R_WHATEVER_LIB);
This little change makes that possible, and gets used in e_capi.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)
The MACHINE value from POSIX::uname() isn't trustworthy at all.
MACHINE names like this has been seen:
_HP__VMM___(1.67GHz/9.0MB)
Perl's `$Config{archname}` is much more trustworthy, especially since
VMS isn't a multiarch operating system, at least yet.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19285)
Since cl knows what architecture it builds fore, all depending on what
the user set up, it makes sense to ask it, and use that result primarly,
and only use the POSIX::uname() MACHINE value as a fallback.
Also, this does indeed determine if cl is present or not.
We drop the explicit names in .github/workflows/windows.yml as proof
of concept.
Fixes#19281
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19285)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19257)
The code is derived from @sftcd's work in PR #17172.
This PR puts the DHKEM algorithms into the provider layer as
KEM algorithms for EC and ECX.
This PR only implements the DHKEM component of HPKE as specified in
RFC 9180.
crypto/hpke/hpke_util.c has been added for fuctions that will
be shared between DHKEM and HPKE.
API's for EVP_PKEY_auth_encapsulate_init() and EVP_PKEY_auth_decapsulate_init()
have been added to support authenticated encapsulation. auth_init() functions
were chosen rather that a EVP_PKEY_KEM_set_auth() interface to support
future algorithms that could possibly need different init functions.
Internal code has been refactored, so that it can be shared between the DHKEM
and other systems. Since DHKEM operates on low level keys it needs to be
able to do low level ECDH and ECXDH calls without converting the keys
back into EVP_PKEY/EVP_PKEY_CTX form. See ossl_ecx_compute_key(),
ossl_ec_public_from_private()
DHKEM requires API's to derive a key using a seed (IKM). This did not sit
well inside the DHKEM itself as dispatch functions. This functionality
fits better inside the EC and ECX keymanagers keygen, since
they are just variations of keygen where the private key is generated
in a different manner. This should mainly be used for testing purposes.
See ossl_ec_generate_key_dhkem().
It supports this by allowing a settable param to be passed to keygen
(See OSSL_PKEY_PARAM_DHKEM_IKM).
The keygen calls code within ec and ecx dhkem implementation to handle this.
See ossl_ecx_dhkem_derive_private() and ossl_ec_dhkem_derive_private().
These 2 functions are also used by the EC/ECX DHKEM implementations to generate
the sender ephemeral keys.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19068)
In perl, this may be ambiguous:
fn (expr1), expr2
Is the comma (which may be `=>` just as well in this case) a separator
between arguments to `fn`, or is it the comma operator, separating the
expressions `fn(expr1)` and `expr2`? It appears that in this particular
case, perl takes the existing parentheses to mean the latter. When the
former was intended, extra parentheses are required.
Fixes#19209
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19211)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18812)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18812)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18812)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18812)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18812)
Also change B< to I< in {CMS,PKCS7}_verify.pod, PKCS7_sign{,_add_signer}.pod
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18915)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18930)
