Current VMS C-RTL does not have <sys/select.h>. <sys/socket.h> is
a good enough replacement to get fd_set.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15319)
This includes error reporting for libcrypto sub-libraries in surprising
places.
This was done using util/err-to-raise
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13318)
HPE NonStop Port Changes for 3.0.0 Includes unthreaded, PUT, and SPT for OSS.
The port changes include wrapping where necessary for FLOSS and
appropriate configuration changes to support that. Two tests
are excluded as being inappropriate for the platform.
The changes are:
* Added /usr/local/include to nonstop-nsx_spt_floss to load floss.h
* Added SPT Floss variant for NonStop
* Wrapped FLOSS definitions in OPENSSL_TANDEM_FLOSS to allow selective enablement.
* SPT build configuration for NonStop
* Skip tests not relevant for NonStop
* PUT configuration changes required for NonStop platforms
* Configurations/50-nonstop.conf: updates for TNS/X platform.
* FLOSS instrumentation for HPE NonStop TNS/X and TNS/E platforms.
* Configurations/50-nonstop.conf: modifications for non-PUT TNS/E platform b
* Fix use of DELAY in ssltestlib.c for HPNS.
* Fixed commit merge issues and added floss to http_server.c
CLA: Permission is granted by the author to the OpenSSL team to use these modifications.
Fixes#5087.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12800)
Add/extend range check for 'fd' argument of BIO_socket_wait() and bio_wait()
Correct nap time calculations in bio_wait(), thus correcting also BIO_wait()
Update a type cast from 'unsigned long' to 'unsigned int'
Extend the comments and documentation of BIO_wait()
Rename BIO_connect_retry() to BIO_do_connect_retry()
Make its 'timeout' argument < 0 lead to BIO_do_connect() tried only once
Add optional 'nap_milliseconds' parameter determining the polling granularity
Correct and generalize the retry case checking
Extend the comments and documentation of BIO_do_connect_retry()
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11986)
We were excluding more code than we needed to in the OCSP/HTTP code in
the event of no-sock. We should also not assume that a BIO passed to our
API is socket based.
This fixes the no-sock build
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11134)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
Change SYSerr to have the function name; remove SYS_F_xxx defines
Add a test and documentation.
Use get_last_socket_err, which removes some ifdef's in OpenSSL code.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9072)
Previously, the API version limit was indicated with a numeric version
number. This was "natural" in the pre-3.0.0 because the version was
this simple number.
With 3.0.0, the version is divided into three separate numbers, and
it's only the major number that counts, but we still need to be able
to support pre-3.0.0 version limits.
Therefore, we allow OPENSSL_API_COMPAT to be defined with a pre-3.0.0
style numeric version number or with a simple major number, i.e. can
be defined like this for any application:
-D OPENSSL_API_COMPAT=0x10100000L
-D OPENSSL_API_COMPAT=3
Since the pre-3.0.0 numerical version numbers are high, it's easy to
distinguish between a simple major number and a pre-3.0.0 numerical
version number and to thereby support both forms at the same time.
Internally, we define the following macros depending on the value of
OPENSSL_API_COMPAT:
OPENSSL_API_0_9_8
OPENSSL_API_1_0_0
OPENSSL_API_1_1_0
OPENSSL_API_3
They indicate that functions marked for deprecation in the
corresponding major release shall not be built if defined.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7724)
get_last_sys_error() already exists, so there's no need for yet
another macro that fulfills the same purpose.
Fixes#4120
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6088)
Since return is inconsistent, I removed unnecessary parentheses and
unified them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4541)
BIO_socket_ioctl is only implemented on VMS for VMS version 7.0 and
up, but since we only support version 7.1 and up, there's no need to
check the VMS version.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3448)
The old BIO_accept() function can encounter errors during malloc. We need
to ensure we properly clean up if that occurs.
GH Issue #817
Reviewed-by: Richard Levitte <levitte@openssl.org>
BIO_sock_error() returned 1 when getsockopt() fails when it should
return the error code for that failure.
Additionally, the optlen parameter to getsockopt() has to point at
the size of the area that the optval parameter points at rather than
zero. Some systems may forgive it being zero, but others don't.
Reviewed-by: Matt Caswell <matt@openssl.org>
There is a preference for suffixes to indicate that a function is internal
rather than prefixes. Note: the suffix is only required to disambiguate
internal functions and public symbols with the same name (but different
case)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There was a lot of naming inconsistency, so we try and standardise on
one form.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
BIO_sock_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Most of the times, it seems that socklen_t is unsigned.
Unfortunately, this isn't always the case, and it doesn't compare with
a size_t without warning.
A cast resolves the issue.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Because different platforms have different levels of support for IPv6,
different kinds of sockaddr variants, and some have getaddrinfo et al
while others don't, we could end up with a mess if ifdefs, duplicate
code and other maintainance nightmares.
Instead, we're introducing wrappers around the common form for socket
communication:
BIO_ADDR, closely related to struct sockaddr and some of its variants.
BIO_ADDRINFO, closely related to struct addrinfo.
With that comes support routines, both convenient creators and
accessors, plus a few utility functions:
BIO_parse_hostserv, takes a string of the form host:service and
splits it into host and service. It checks for * in both parts, and
converts any [ipv6-address] syntax to ust the IPv6 address.
BIO_lookup, looks up information on a host.
All routines handle IPv4 (AF_INET) and IPv6 (AF_INET6) addresses, and
there is support for local sockets (AF_UNIX) as well.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Even though SOCKET is effectively declared as (void *) on Windows, it's
not actually a pointer, but an index within per-process table of
kernel objects. The table size is actually limited and its upper limit
is far below upper limit for signed 32-bit integer. This is what makes
cast in question possible.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
There are header files in crypto/ that are used by a number of crypto/
submodules. Move those to crypto/include/internal and adapt the
affected source code and Makefiles.
The header files that got moved are:
crypto/cryptolib.h
crypto/md32_common.h
Reviewed-by: Rich Salz <rsalz@openssl.org>
Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr)
for memset and memcpy. Remove needless casts for those functions.
For memset, replace alternative forms of zero with 0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
