- DH support should work with both DH and DHX keys
- UKM parameter is optional so it can have length 0
Fixes#13810
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13869)
EVP_KEY_new_CMAC_key_ex was in the pre-release 3.0 only, so is safe
to remove.
Restore 1.1.1 version of EVP_PKEY_new_CMAC_key documentation.
Also make testing of EVP_PKEY_new_CMAC_key properly #ifdef'd.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13829)
To clarify the purpose of these two calls rename them to
EVP_CIPHER_CTX_get_original_iv and EVP_CIPHER_CTX_get_updated_iv.
Also rename the OSSL_CIPHER_PARAM_IV_STATE to OSSL_CIPHER_PARAM_UPDATED_IV
to better align with the function name.
Fixes#13411
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13870)
The primary DRBG may be shared across multiple threads and therefore
we must use locking to access it. Previously we were enabling that locking
lazily when we attempted to obtain one of the child DRBGs. Part of the
process of enabling the lock, is to create the lock. But if we create the
lock lazily then it is too late - we may race with other threads where each
thread is independently attempting to enable the locking. This results
in multiple locks being created - only one of which "sticks" and the rest
are leaked.
Instead we enable locking on the primary when we first create it. This is
already locked and therefore we cannot race.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13660)
We've spread around FETCH_FAILED errors in quite a few places, and
that gives somewhat crude error records, as there's no way to tell if
the error was unavailable algorithms or some other error at such high
levels.
As an alternative, we take recording of these kinds of errors down to
the fetching functions, which are in a much better place to tell what
kind of error it was, thereby relieving the higher level calls from
having to guess.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13467)
The EVP lib was calling EVP_CIPHER_CTX_block_size(), which in turn calls
EVP_CIPHER_block_size() in order to find the block_size in every
EVP_EncryptUpdate() call. This adds a surprising amount of overhead when
using speed to test aes-128-cbc. Since we're in the EVP lib itself, we can
just directly access this value.
To test performance I ran the command:
openssl speed -evp aes-128-cbc -bytes 16 -seconds 30
For the before and after, I ran this twice and discarded the first result
to "warm up" my machine.
Before:
aes-128-cbc 716949.71k
After:
aes-128-cbc 742807.11k
This represents a performance improvement of about 4%
Partially fixes#13407
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13734)
EVP_CIPHER already caches certain constants so that we don't have to
query the provider every time. We do the same thing with EVP_MD constants.
Without this we can get performance issues, e.g. running "speed" with
small blocks of data to digest can spend a long time in EVP_MD_size(),
which should be quick.
Partialy fixes#13578
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13730)
Previously we cached the cipher constants in EVP_CIPHER_fetch(). However,
this means we do the caching every time we call that function, even if
the core has previusly fetched the cipher and cached it already. This
means we can end up re-caching the constants even though they are already
present. This also means we could be updating these constants from
multiple threads at the same time.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13730)
The configuration option 'no-rsa' was dropped with OpenSSL 1.1.0, so
this is simply a cleanup of the remains.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13700)
In most error cases, EVP_PKEY_CTX_dup() would only free the EVP_PKEY_CTX
without freeing the duplicated contents.
Fixes#13503
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13661)
The apps, the CMS library and the X.509 library are primarly affected.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13589)
EVP_PKEY_CTX_set_ec_ functions were only available when EC was enabled
('no-ec' not configured). However, that makes it impossible to use
these functions with an engine or a provider that happens to implement
EC_KEY. This change solves that problem by shuffling these functions
to more appropriate places.
Partially fixes#13550
squash! EVP_PKEY & EC_KEY: Make EC EVP_PKEY_CTX parameter ctrls / setters more available
By consequence, there are a number of places where we can remove the
check of OPENSSL_NO_EC. This requires some re-arrangements of
internal tables to translate between numeric identities and names.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13589)
EVP_PKEY_CTX_set_dh_ functions were only available when DH was enabled
('no-dsa' not configured). However, that makes it impossible to use
these functions with an engine or a provider that happens to implement
DH. This change solves that problem by shuffling these functions to
more appropriate places.
By consequence, there are a number of places where we can remove the
check of OPENSSL_NO_DH. This requires some re-arrangements of
internal tables to translate between numeric identities and names.
Partially fixes#13550
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13589)
These functions aren't used by the FIPS module, so there's no reason
to include it there.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13589)
This replaces the internal evp_pkey_get_EC_KEY_curve_nid()
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13436)
These functions are documented to return 0 if the size they are
supposed to return 0 if the size isn't available. They needed a bit
of adjustment to actually do so, since the backend functions they call
might return negative numbers in that case.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13611)
EVP_PKEY_CTX_set_dsa_ functions were only available when DSA was
enabled ('no-dsa' not configured). However, that makes it impossible
to use these functions with an engine or a provider that happens to
implement DSA. This change solves that problem by shuffling these
functions to more appropriate places.
Fixes#13529
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13530)
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13515)
Fixes#13057
When using an engine, there is no cipher->prov so a call to
EVP_CIPHER_CTX_set_padding() returns an error when
evp_do_ciph_ctx_setparams() is called. For the legacy path it needs to
avoid doing the call and just return 1.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/13437)
This commit tries to address a locking issue in evp_pkey_reset_unlocked
which can occur when it is called from evp_pkey_downgrade.
evp_pkey_downgrade will acquire a lock for pk->lock and if successful
then call evp_pkey_reset_unlocked. evp_pkey_reset_unlocked will call
memset on pk, and then create a new lock and set pk->lock to point to
that new lock. I believe there are two problems with this.
The first is that after the call to memset, another thread would try to
acquire a lock for NULL as that is what the value of pk->lock would be
at that point.
The second issue is that after the new lock has been assigned to
pk->lock, that lock is different from the one currently locked so
another thread trying to acquire the lock will succeed which can lead to
strange behaviour. More details and a reproducer can be found in the
Refs link below.
This changes the evp_pkey_reset_unlocked to not touch the lock
and the creation of a new lock is done in EVP_PKEY_new.
Refs:
https://github.com/danbev/learning-libcrypto/blob/master/notes/issues.md#openssl-investigationtroubleshootinghttps://github.com/nodejs/node/issues/29817
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13374)
It does not do it in legacy path and 1.1.1 so that must not change.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13402)
This is not done absolutely everywhere, as there are places where
the use of ERR_add_error_data() is quite complex, but at least the
simple cases are done.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13318)
This includes error reporting for libcrypto sub-libraries in surprising
places.
This was done using util/err-to-raise
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13318)
It doesn't downgread the keys to legacy any more. Instead, it uses
OSSL_ENCODER to encode the key to DER, and d2i_PKCS8_PRIV_KEY_INFO()
to make a PKCS8_PRIV_KEY_INFO structure from that.
Fixes#12990
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12995)
These were added when the EVP_MAC work was being done.
I dont think these lightweight wrappers are required, and it seems better to remove them,
rather than adding documentation.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13372)
This also modifies i2d_PublicKey() and i2d_KeyParams() to support
provided keys.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13167)
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13278)
These are meant to be used with functions like
OSSL_ENCODER_CTX_new_by_EVP_PKEY()
The OSSL_ENCODER_CTX_new_by_EVP_PKEY() manual is also expanded on the
topics of output types and selections.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13189)
