x509_trust.c, x509_vpm.c and v3_lib.c don't have a lock for their sorts.
This is no worse than the existing code which sorted silently without locks.
Addition is quadratic time in by_dir.c and v3_purp.c. However, this
is an improvement over the older O(n^2 log n) code where each find also
sorted the stack. Also note that v3_purp.c is limited to a maximum of
10 items, so quadratic behaviour isn't terrible.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20842)
Adding all providers is quadratic time because each provider is checked
for being in the stack before adding it. However, this is an improvement
over the older O(n^2 log n) code where each find also sorted the stack.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20842)
There is no lock for the sort. This is no worse than the
existing code which sorted silently without a lock.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20842)
a_strnid.c doesn't have a lock for the sort. This is no worse than the
existing code which sorted silently without a lock.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20842)
We swap p and q in that case except when ACVP tests are being run.
Fixes#20823
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20833)
Signed-off-by: Liu-ErMeng <liuermeng2@huawei.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20829)
Fixes#19014
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20834)
More specifically, don't sort the stack when searching when it isn't sorted.
This avoids a race condition.
Fixes#20135
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20782)
Signed-off-by: Liu-ErMeng <liuermeng2@huawei.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20797)
The logic for handling inconsistent use of -rspin etc., -port, -server,
and -use_mock_srv options proved faulty. This is fixed here, updating and
correcting also the documentation and diagnostics of the involved options.
In particular, the case that -rspin (or -rspout. reqin, -reqout) does not
provide enough message file names was not properly described and handled.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20295)
We make these APIs work more like the TLS versions do.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20827)
The docs mentioned a "RD"/"read done" state that could be returned.
In practice that never happened, so update the docs to match
reality.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20827)
We initialise the record layer rstate variable to ensure the
SSL_rstate_string*() APIs return values that are consistent with
previous versions.
Fixes#20808
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20827)
Note that PKCS#12 input is still not supported here-
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18917)
Added a function to allocate a buffer and copy a maching param.
Added a function to allocate a buffer and concatenate all matching params.
Fixes#20717
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20724)
This allows additional command line options to be passed to the assembler.
For example:
Configure VC-WIN64A ASFLAGS=--reproducible
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20813)
Instead of using stat() to check if a file is a directory
we just skip . and .. as a workaround.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20786)
- factorize BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT calls.
- simplify a return type
- style nits
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20602)
The demo code is quite often block copied for new demos,
so this PR changes demos to use EXIT_SUCCESS & EXIT_FAILURE
instead of using 0 and 1.
Internal functions use the normal notation of 0 = error, 1 = success,
but the value returned by main() must use EXIT_SUCCESS and EXIT_FAILURE.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20545)
It is better to use strchr where we are looking for a single character.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20788)
Using "continue" in a do...while(0) loop is pointless. The original intent
was that the loop would continue to a second iteration in this case.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20788)
Reasons:
- The patch was missing the linker flag /guard:cf
As a result no binary with CFG was ever built
- /guard:cf is incompatible with NASM
If the linker flag is added, the resulting binary fails with this exception:
Unhandled exception at 0x00007FFFB8B93C90 (ntdll.dll) in openssl.exe: Indirect call guard check detected invalid control transfer.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20807)
default_context_do_init may be never called and CRYPTO_THREAD_init_local
inside it may be never called too. But corresponding
CRYPTO_THREAD_cleanup_local is always called at cleanup stage. This lead
to undefined behavior.
So, add flag to check that default_context_do_init will be called
successfully or not.
Fix: #20697
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20801)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20762)
Add a new option to the `test' section of SSL test data structure.
This contains a space separated list of version checks, all of which must
pass.
Note that the version checks are as they as because:
- 3.1.0 doesn't have mandatory EMS support, so it can run the old tests.
- 3.1.1 (& later) will have mandatory EMS support, so they can't run them.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20762)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20762)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20762)
The SSL API tests copies fipsmodule.cnf and modifies it. Unfortunately, it
grabbed the wrong instance of this file.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20762)
Fixes#20710
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20745)
Also updated the corresponding documentations.
Fixes#20710
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20745)
According to docs, EVP_PKEY_get_int_param should return 1 on Success, and
0 on Failure. So, fix checking of this return value at check_curve
CLA: trivial
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20770)
Cache the fetched MAC and MD implementation until propq changes.
No need to keep the output stored in the context.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20534)
