Including RIPEMD160 in both the default and legacy providers shouldn't break
anyone and makes the algorithm available more readily.
Fixes#17722
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19375)
Fixes#19290
update rsa_set_ctx_params() so that the digest function used in the
MGF1 construction is set correctly. Add a test for this to
evp_extra_test.c based on the code scaro-axway provided in #19290.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19342)
Create new TLS_GROUP_ENTRY values for these groups.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19315)
Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,
there's no need to report ERR_R_MALLOC_FAILURE where they are called
directly, or when SSLfatal() and RLAYERfatal() is used, the reason
`ERR_R_MALLOC_FAILURE` is changed to `ERR_R_CRYPTO_LIB`.
There were a number of places where `ERR_R_MALLOC_FAILURE` was reported
even though it was a function from a different sub-system that was
called. Those places are changed to report ERR_R_{lib}_LIB, where
{lib} is the name of that sub-system.
Some of them are tricky to get right, as we have a lot of functions
that belong in the ASN1 sub-system, and all the `sk_` calls or from
the CRYPTO sub-system.
Some extra adaptation was necessary where there were custom OPENSSL_malloc()
wrappers, and some bugs are fixed alongside these changes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)
The IKM was not respected by the s390x specific implementations of X25519 and
X448 keygen. This caused test failures and wrong results if the PCC
instruction was actually available and supported X25519 and/or X448.
Fixes: 78c44b0594 ("Add HPKE DHKEM provider support for EC, X25519 and X448.")
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19278)
The code is derived from @sftcd's work in PR #17172.
This PR puts the DHKEM algorithms into the provider layer as
KEM algorithms for EC and ECX.
This PR only implements the DHKEM component of HPKE as specified in
RFC 9180.
crypto/hpke/hpke_util.c has been added for fuctions that will
be shared between DHKEM and HPKE.
API's for EVP_PKEY_auth_encapsulate_init() and EVP_PKEY_auth_decapsulate_init()
have been added to support authenticated encapsulation. auth_init() functions
were chosen rather that a EVP_PKEY_KEM_set_auth() interface to support
future algorithms that could possibly need different init functions.
Internal code has been refactored, so that it can be shared between the DHKEM
and other systems. Since DHKEM operates on low level keys it needs to be
able to do low level ECDH and ECXDH calls without converting the keys
back into EVP_PKEY/EVP_PKEY_CTX form. See ossl_ecx_compute_key(),
ossl_ec_public_from_private()
DHKEM requires API's to derive a key using a seed (IKM). This did not sit
well inside the DHKEM itself as dispatch functions. This functionality
fits better inside the EC and ECX keymanagers keygen, since
they are just variations of keygen where the private key is generated
in a different manner. This should mainly be used for testing purposes.
See ossl_ec_generate_key_dhkem().
It supports this by allowing a settable param to be passed to keygen
(See OSSL_PKEY_PARAM_DHKEM_IKM).
The keygen calls code within ec and ecx dhkem implementation to handle this.
See ossl_ecx_dhkem_derive_private() and ossl_ec_dhkem_derive_private().
These 2 functions are also used by the EC/ECX DHKEM implementations to generate
the sender ephemeral keys.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19068)
Properly fallback to the default implementation on CPUs
missing necessary instructions.
Fixes#19163
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19182)
It looks like a typo when copy & pasting the structure from blowfish.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19186)
Use a single definiton for protocol string defintions.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19122)
The current code has issues when sizeof(long) <> sizeof(size_t). The two
types are assumed to be interchangeable and them being different will
cause crashes and endless loops.
This fix limits the maximum chunk size for many of the symmetric ciphers
to 2^30 bytes. This chunk size limits the amount of data that will
be encrypted/decrypted in one lump. The code internally handles block
of data later than the chunk limit, so this will present no difference
to the caller. Any loss of efficiency due to limiting the chunking to
1Gbyte rather than more should be insignificant.
Fixes Coverity issues:
1508498, 1508500 - 1508505, 1508507 - 1508527, 1508529 - 1508533,
1508535 - 1508537, 1508539, 1508541 - 1508549, 1508551 - 1508569 &
1508571 - 1508582.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18997)
If the public key is not set on the key, return error instead of crash.
Fixes#18495
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18902)
The s390x provides its custom implementation for the creation of the
ed448 and ed25519 signatures. Unfortunately it does not set the size.
Users that rely of this return parameter end up with wrong values and
will compare wrong sizes of signature.
Set the proper size of the returned signature on success. Set an error
if the signing operation fails.
Fixes: #18912
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/18928)
The fallback DEP works fine there. XLC should be unaffected.
CLA: trivial
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18892)
Fixes#18911
`BSWAP`x/`GETU`xx are no-ops on big-endian. Change the byte swapper.
Fix big-endian issues in the `mulx_ghash()` function
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18920)
Fixes#16721
This uses AES-ECB to create a counter mode AES-CTR32 (32bit counter, I could
not get AES-CTR to work as-is), and GHASH to implement POLYVAL. Optimally,
there would be separate polyval assembly implementation(s), but the only one
I could find (and it was SSE2 x86_64 code) was not Apache 2.0 licensed.
This implementation lives only in the default provider; there is no legacy
implementation.
The code offered in #16721 is not used; that implementation sits on top of
OpenSSL, this one is embedded inside OpenSSL.
Full test vectors from RFC8452 are included, except the 0 length plaintext;
that is not supported; and I'm not sure it's worthwhile to do so.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18693)
It shouldn't be. This moves the reset to the init function instead and only
does the reset on a key change.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18860)
Use hardware acceleration for kmac on s390x. Since klmd does not support
kmac, perform padding of the last block by hand and use kimd. Yields a
performance improvement of between 2x and 3x.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18863)
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18480)
s390x does not directly support keccak via CPACF since these instructions
hard-code the padding to either SHA-3 or SHAKE for the "compute last message
digest" function. This caused test errors on Keccak digests. Fix it by using
"compute intermediate message digest" and manually computing the padding for
Keccak.
Fixes: a8b238f0e4 ("Fix SHA, SHAKE, and KECCAK ASM flag passing")
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18794)
Both of these are false positives but better to be rid of the issue permanently
than for it to repeatedly return to haunt us.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17896)
I have searched through all references of ERR_R_MALLOC_FAILURE for any
other instances..
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18638)
Otherwise the information that the EC group was imported from
explicit parameters is lost when the key is moved across providers.
Fixes#18600
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/18609)
SIZE_MAX is used in a recent fix of this file, but without including
internal/numbers.h, so that macro ends up not existing on some platforms,
resulting in build failures.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18605)
kdf_derive() calls EVP_KDF_derive(), but didn't do enough to adapt its input
buffer length arguments to fit the requirements to call EVP_KDF_derive().
Fixes#18517
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18533)
(cherry picked from commit e906eab8d8)
We fix the dsa, dh, ec and rsa export routines so that they are
consistent with each other and do not report success if the allocation
of parameters failed.
This is essentially the same fix as applied in #18483 but applied to all
relevant key types.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18507)
dst->digest needs to be zeroized in case HMAC_CTX_copy
or ossl_prov_digest_copy return failure.
Fixes#18493
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18502)
Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Tested-by: Jiatai He <jiatai2021@iscas.ac.cn>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18197)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/18416)
Fixes#18388
This just looks like an omission, as this is added to libcrypto and libssl
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/18416)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18368)
Rather than relying on the locale code working, instead implement these
functions directly.
Fixes#18322
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/18344)
It also allows for passing -DOPENSSL_NO_LOCALE as a workaround
to ./Configure command.
Fixes#18233
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18282)
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18220)
