DES, idea, seed, rc2, rc4, rc5, cast and blowfish have been moved out of the default provider.
Code shared between desx and tdes has been moved into a seperate file (cipher_tdes_common.c).
3 test recipes failed due to using app/openssl calls that used legacy ciphers.
These calls have been updated to supply both the default and legacy providers.
Fixed openssl app '-provider' memory leak
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11419)
In https://github.com/openssl/openssl/pull/10883, I'd meant to exclude
the perlasm drivers since they aren't opening pipes and do not
particularly need it, but I only noticed x86_64-xlate.pl, so
arm-xlate.pl and ppc-xlate.pl got the change.
That seems to have been fine, so be consistent and also apply the change
to x86_64-xlate.pl. Checking for errors is generally a good idea.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/10930)
To support Intel CET, all indirect branch targets must start with
endbranch. Here is a patch to add endbranch to function entries
in x86_64 assembly codes which are indirect branch targets as
discovered by running openssl testsuite on Intel CET machine and
visual inspection.
Verified with
$ CC="gcc -Wl,-z,cet-report=error" ./Configure shared linux-x86_64 -fcf-protection
$ make
$ make test
and
$ CC="gcc -mx32 -Wl,-z,cet-report=error" ./Configure shared linux-x32 -fcf-protection
$ make
$ make test # <<< passed with https://github.com/openssl/openssl/pull/10988
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10982)
If one of the perlasm xlate drivers crashes, OpenSSL's build will
currently swallow the error and silently truncate the output to however
far the driver got. This will hopefully fail to build, but better to
check such things.
Handle this by checking for errors when closing STDOUT (which is a pipe
to the xlate driver).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10883)
Move .cfi_startproc to the right place for RC4. Add missing
.cfi_startproc and .cfi_endproc to RC4_options.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/10872)
Use of the low level RC4 functions has been informally discouraged for a long
time. We now formally deprecate them.
Applications should instead use the EVP APIs, e.g. EVP_EncryptInit_ex,
EVP_EncryptUpdate, EVP_EncryptFinal_ex and the equivalently named decrypt
functions.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10834)
clang imposes some restrictions on the assembler code that
gcc does not.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10330)
Make the include guards consistent by renaming them systematically according
to the naming conventions below
For the public header files (in the 'include/openssl' directory), the guard
names try to match the path specified in the include directives, with
all letters converted to upper case and '/' and '.' replaced by '_'. For the
private header files files, an extra 'OSSL_' is added as prefix.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
They now generally conform to the following argument sequence:
script.pl "$(PERLASM_SCHEME)" [ C preprocessor arguments ... ] \
$(PROCESSOR) <output file>
However, in the spirit of being able to use these scripts manually,
they also allow for no argument, or for only the flavour, or for only
the output file. This is done by only using the last argument as
output file if it's a file (it has an extension), and only using the
first argument as flavour if it isn't a file (it doesn't have an
extension).
While we're at it, we make all $xlate calls the same, i.e. the $output
argument is always quoted, and we always die on error when trying to
start $xlate.
There's a perl lesson in this, regarding operator priority...
This will always succeed, even when it fails:
open FOO, "something" || die "ERR: $!";
The reason is that '||' has higher priority than list operators (a
function is essentially a list operator and gobbles up everything
following it that isn't lower priority), and since a non-empty string
is always true, so that ends up being exactly the same as:
open FOO, "something";
This, however, will fail if "something" can't be opened:
open FOO, "something" or die "ERR: $!";
The reason is that 'or' has lower priority that list operators,
i.e. it's performed after the 'open' call.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9884)
Since the arguments are now generated in the build file templates,
they should be removed from the build.info files.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9884)
In the removal of BEGINRAW / ENDRAW, attention to the difference
between capital .S and lowercase .s wasn't duly paid. This corrects
the error.
Fixes#8155
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8157)
It was an ugly hack to avoid certain problems that are no more.
Also added GENERATE lines for perlasm scripts that didn't have that
explicitly.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8125)
The make variables LIB_CFLAGS, DSO_CFLAGS and so on were used in
addition to CFLAGS and so on. This works without problem on Unix and
Windows, where options with different purposes (such as -D and -I) can
appear anywhere on the command line and get accumulated as they come.
This is not necessarely so on VMS. For example, macros must all be
collected and given through one /DEFINE, and the same goes for
inclusion directories (/INCLUDE).
So, to harmonize all platforms, we repurpose make variables starting
with LIB_, DSO_ and BIN_ to be all encompassing variables that
collects the corresponding values from CFLAGS, CPPFLAGS, DEFINES,
INCLUDES and so on together with possible config target values
specific for libraries DSOs and programs, and use them instead of the
general ones everywhere.
This will, for example, allow VMS to use the exact same generators for
generated files that go through cpp as all other platforms, something
that has been impossible to do safely before now.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5357)
C preprocessor flags get separated from C flags, which has the
advantage that we don't get loads of macro definitions and inclusion
directory specs when linking shared libraries, DSOs and programs.
This is a step to add support for "make variables" when configuring.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5177)
Around 138 distinct errors found and fixed; thanks!
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3459)
Since return is inconsistent, I removed unnecessary parentheses and
unified them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4541)
Names were not removed.
Some comments were updated.
Replace Andy's address with openssl.org
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4516)
Remove some incorrect copyright references.
Move copyright to standard place
Add OpenSSL copyright where missing.
Remove copyrighted file that we don't use any more
Remove Itanium assembler for RC4 and MD5 (assembler versions of old and
weak algorithms for an old chip)
Standardize apps/rehash copyright comment; approved by Timo
Put dual-copyright notice on mkcert
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3691)
The assembler already knows the actual path to the generated file and,
in other perlasm architectures, is left to manage debug symbols itself.
Notably, in OpenSSL 1.1.x's new build system, which allows a separate
build directory, converting .pl to .s as the scripts currently do result
in the wrong paths.
This also avoids inconsistencies from some of the files using $0 and
some passing in the filename.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3431)
The prevailing style seems to not have trailing whitespace, but a few
lines do. This is mostly in the perlasm files, but a few C files got
them after the reformat. This is the result of:
find . -name '*.pl' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.c' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.h' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
Then bn_prime.h was excluded since this is a generated file.
Note mkerr.pl has some changes in a heredoc for some help output, but
other lines there lack trailing whitespace too.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The Unix build was the last to retain the classic build scheme. The
new unified scheme has matured enough, even though some details may
need polishing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The reason to do so is that some of the generators detect PIC flags
like -fPIC and -KPIC, and those are normally delivered in LD_CFLAGS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some of these scripts would recognise an output parameter if it looks
like a file path. That works both in both the classic and new build
schemes. Some fo these scripts would only recognise it if it's a
basename (i.e. no directory component). Those need to be corrected,
as the output parameter in the new build scheme is more likely to
contain a directory component than not.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Before the 'Introduce the "pic" / "no-pic" config option' commit, the
shared_cflag value for the chosen config would be part of the make
variable CFLAG, which got replicated into CFLAGS and ASFLAGS.
Since said commit, the shared_cflag value has become a make variable
of its own, SHARED_CFLAG (which is left empty in a "no-pic" build).
However, ASFLAGS was forgotten. That's what's corrected with this
change.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/rc4/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This takes us away from the idea that we know exactly how our static
libraries are going to get used. Instead, we make them available to
build shareable things with, be it other shared libraries or DSOs.
On the other hand, we also have greater control of when the shared
library cflags. They will never be used with object files meant got
binaries, such as apps/openssl or test/test*.
With unified, we take this a bit further and prepare for having to
deal with extra cflags specifically to be used with DSOs (dynamic
engines), libraries and binaries (applications).
Reviewed-by: Rich Salz <rsalz@openssl.org>
All those flags existed because we had all the dependencies versioned
in the repository, and wanted to have it be consistent, no matter what
the local configuration was. Now that the dependencies are gone from
the versioned Makefile.ins, it makes much more sense to use the exact
same flags as when compiling the object files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It seems that on some platforms, the perlasm scripts call the C
compiler for certain checks. These scripts need the environment
variable CC to have the C compiler command.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Now that we have the foundation for the "unified" build scheme in
place, we add build.info files. They have been generated from the
Makefiles in the same directories. Things that are platform specific
will appear in later commits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Many options for supporting optimizations for legacy crypto on legacy
platforms have been removed. This simplifies the source code and
does not really penalize anyone.
DES_PTR (always on)
DES_RISC1, DES_RISC2 (always off)
DES_INT (always 'unsigned int')
DES_UNROLL (always on)
BF_PTR (always on) BF_PTR2 (removed)
MD2_CHAR, MD2_LONG (always 'unsigned char')
IDEA_SHORT, IDEA_LONG (always 'unsigned int')
RC2_SHORT, RC2_LONG (always 'unsigned int')
RC4_LONG (only int and char (for assembler) are supported)
RC4_CHUNK (always long), RC_CHUNK_LL (removed)
RC4_INDEX (always on)
And also make D_ENCRYPT macro more clear (@appro)
This is done in consultation with Andy.
Reviewed-by: Andy Polyakov <appro@openssl.org>
