In OpenSSL pre 1.1.0, 'openssl x509 -CAkeyformat engine' was possible
and supported. In 1.1.0, a small typo ('F' instead of 'f') removed
that possibility. This restores the pre 1.1.0 behavior.
Fixes#4366
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4643)
information about the length of the scalar used in ECDSA operations
from a large number (2^32) of signatures.
This doesn't rate as a CVE because:
* For the non-constant time code, there are easier ways to extract
more information.
* For the constant time code, it requires a significant number of signatures
to leak a small amount of information.
Thanks to Neals Fournaise, Eliane Jaulmes and Jean-Rene Reinhard for
reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4576)
information about the length of a value used in DSA operations from
a large number of signatures.
This doesn't rate as a CVE because:
* For the non-constant time code, there are easier ways to extract
more information.
* For the constant time code, it requires a significant number of signatures
to leak a small amount of information.
Thanks to Neals Fournaise, Eliane Jaulmes and Jean-Rene Reinhard for
reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4576)
It turns out that (some?) fuzzers can read a dictionary of OIDs,
so we generate one as part of the usual 'make update'.
Fixes#4615
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4637)
* ARIA, SEED, Camellia
* AES-XTS, OCB, CTR
* Key wrap for 3DES, AES
* RC4-MD5 AD
* CFB modes with 1-bit and 8-bit shifts
Split EVP_EncryptInit cipher list to individual man pages.
Consolidate cipher bit-lengths in EVP_EncryptInit cipher list.
Clarify
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4564)
A block of six TEST_int_xy() macro definitions was duplicated.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4624)
The check should reject kernel versions < 4.1.0, not <= 4.1.0.
The issue was spotted on OpenSUSE 42.1 Leap, since its linux/version.h
header advertises 4.1.0.
CLA: trivial
Fixes: 7f458a48 ("ALG: Add AFALG engine")
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4617)
The eventfd syscall is deprecated and is not available on aarch64, causing
build to fail:
engines/e_afalg.c: In function 'eventfd':
engines/e_afalg.c:108:20: error: '__NR_eventfd' undeclared (first use in this function)
return syscall(__NR_eventfd, n);
^
Instead, switch to the newer eventfd2 syscall, which is supposed to be
supported by all architectures.
This kind of issues would be avoided by simply using the eventfd(2)
wrapper from the libc, but there must be subtle reasons not to...
Tested on a aarch64 system running OpenSUSE Leap 42.1 (gcc118 from
https://cfarm.tetaneutral.net/machines/list/ ) and also cross-compiling
for aarch64 with LEDE (kernel 4.9).
This properly fixes#1685.
CLA: trivial
Fixes: 7f458a48 ("ALG: Add AFALG engine")
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4617)
No two public key ASN.1 methods with the same pkey_id can be
registered at the same time.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4596)
If the list of fds contains only (one or more) entries marked
as deleted prior to the entry currently being deleted, and the
entry currently being deleted was only just added, the 'prev'
pointer would never be updated from its initial NULL value, and
we would dereference NULL while trying to remove the entry from
the linked list.
Reported by Coverity.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4602)
This would cut out some distracting noise in the test output
if we ended up hitting these error cases.
Reported by Coverity.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4602)
Thanks to David Benjamin for suggesting the fix needed by this fix.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4607)
We currently increment the SSL_CTX stats.sess_accept field in
tls_setup_handshake(), which is invoked from the state machine well
before ClientHello processing would have had a chance to switch
the SSL_CTX attached to the SSL object due to a provided SNI value.
However, stats.sess_accept_good is incremented in tls_finish_handshake(),
and uses the s->ctx.stats field (i.e., the new SSL_CTX that was switched
to as a result of SNI processing). This leads to the confusing
(nonsensical) situation where stats.sess_accept_good is larger than
stats.sess_accept, as the "sess_accept" value was counted on the
s->session_ctx.
In order to provide some more useful numbers, increment
s->ctx.stats.sess_accept after SNI processing if the SNI processing
changed s->ctx to differ from s->session_ctx. To preserve the
property that any given accept is counted only once, make the
corresponding decrement to s->session_ctx.stats.sess_accept when
doing so.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4549)
For client SSL objects and before any callbacks have had a chance
to be called, we can write the stats accesses using the session_ctx,
which makes sense given that these values are all prefixed with
"sess_".
For servers after a client_hello or servername callback has been
called, retain the existing behavior of modifying the statistics
for the current (non-session) context. This has some value,
in that it allows the statistics to be viewed on a per-vhost level.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4549)
It is expected that SSL_CTX objects are shared across threads,
and as such we are responsible for ensuring coherent data accesses.
Aligned integer accesses ought to be atomic already on all supported
architectures, but we can be formally correct.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4549)
Extend the s390x capability vector to store the longer facility list
available from z13 onwards. The bits indicating the vector extensions
are set to zero, if the kernel does not enable the vector facility.
Also add capability bits returned by the crypto instructions' query
functions.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4542)
Use the newly introduced sk_TYPE_new_reserve API to simplify the
reservation of stack as creating it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4592)
Only the 'new' variant of sk_TYPE_new_reserve() deals with
compression functions.
Mention both new 'reserve' APIs as being added in OpenSSL 1.1.1.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4591)
The functions strcasecmp() and strncasecmp() will use locale specific rules
when performing comparison. This could cause some problems in certain
locales. For example in the Turkish locale an 'I' character is not the
uppercase version of 'i'. However IA5 strings should not use locale specific
rules, i.e. for an IA5 string 'I' is uppercase 'i' even if using the
Turkish locale.
This fixes a bug in name constraints checking reported by Thomas Pornin
(NCCGroup).
This is not considered a security issue because it would require both a
Turkish locale (or other locale with similar issues) and malfeasance by
a trusted name-constrained CA for a certificate to pass name constraints
in error. The constraints also have to be for excluded sub-trees which are
extremely rare. Failure to match permitted subtrees is a bug, not a
vulnerability.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4569)
<compar> to <compare> to match the var name in function prototype
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4559)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4559)
This is a combination of sk_new and sk_reserve, to make it more
convenient to allocate a new stack with reserved memory and comaprison
function (if any).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4559)
asn1_item_embed_free() will try unlocking and fail in this case, and
since the new item was just allocated on the heap, free it directly
with OPENSSL_free() instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4579)
The previous change with this intention didn't quite do it. An
embedded item must not be freed itself, but might potentially contain
non-embedded elements, which must be freed.
So instead of calling ASN1_item_ex_free(), where we can't pass the
embed flag, we call asn1_item_embed_free() directly.
This changes asn1_item_embed_free() from being a static function to
being a private non-static function.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4579)
The lhash expand() function can fail if realloc fails. The previous
implementation made changes to the structure and then attempted to do a
realloc. If the realloc failed then it attempted to undo the changes it
had just made. Unfortunately changes to lh->p were not undone correctly,
ultimately causing subsequent expand() calls to increment num_nodes to a
value higher than num_alloc_nodes, which can cause out-of-bounds reads/
writes. This is not considered a security issue because an attacker cannot
cause realloc to fail.
This commit moves the realloc call to near the beginning of the function
before any other changes are made to the lhash structure. That way if a
failure occurs we can immediately fail without having to undo anything.
Thanks to Pavel Kopyl (Samsung) for reporting this issue.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4550)
An embedded item wasn't allocated separately on the heap, so don't
free it as if it was.
Issue discovered by Pavel Kopyl
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4572)
The function BN_security_bits() uses the values from SP800-57 to assign
security bit values for different FF key sizes. However the value for 192
security bits is wrong. SP800-57 has it as 7680 but the code had it as
7690.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4546)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4534)
Add a check for NULL return in t1_lib.c.
Since return type of ssl_cert_lookup_by_idx is pointer and unify coding
style, I changed from zero to NULL in ssl_cert.c.
Remove unnecessary space for ++.
Fix incorrect condition
Expression is always false because 'else if' condition matches previous
condition. SInce the next line of 'else if' condition has substituted
TLSEXT_ECPOINTFORMAT_ansiX962_compressed_char2, the 'else if'
condition should compare with NID_X9_62_characteristic_two_field.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4562)
Add openssl-foo as a name for the openssl "foo" command.
Addresses an issue found by a usability study to be published.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4553)
Since return is inconsistent, I removed unnecessary parentheses and
unified them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4541)
