The memory blocks contain secret data and must be
cleared before returning to the system heap.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4062)
Some extensions were being displayed twice, before they were parsed, and
again after they were parsed.
The supported_versions extension was not being fully displayed, as it
was processed differently than other extensions.
Move the debug callback to where the extensions are first collected, to
catch all the extensions as they come in, so they are ordered correctly.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3911)
TLS_ST_SR_NEXT_PROTO means "SSLv3/TLS read next proto"
Fix typo in the message for TLS_ST_SW_CERT_STATUS
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4054)
I think it's better to use `GetFileAttributes` to obtain the attributes
of a file than `FindFirstFile`. If the input name contains `*`, this
function should return failure rather than check whether the first match
happens to be a file or a directory.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3991)
To state the fractional seconds part will be lost in the conversion.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4041)
Remove the function prototypes for ssl_cert_get0_next_certificate, ssl_set_default_md, tls1_shared_list,
dtls1_send_newsession_ticket, tls1_ctrl, and tls1_callback_ctrl, all of which are not defined.
It also changed the signature of the function pqueue_next to `pitem *pqueue_next(piterator *item)` in
pqueue.c, making it match the prototype in ssl_locl.h. (`piterator *` is equivalent to `pitem **`.)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4049)
This patch removes the prototype of function RECORD_LAYER_set_write_sequence from record_locl.h, since this function is not defined.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4051)
Add functions to enumerate public key methods. Add test to ensure table
is in the correct order.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4015)
original problem: if a private key is invaild, nothing outputted.
the error filter in apps/rsa.c is not working any more.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4043)
Documentation and test cases are also updated
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3783)
Since this file is modified in PR #3934, so should be cleaned up
incidentially.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4035)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4036)
File::Glob::glob is deprecated, it's use generates this kind of
message:
File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob() instead. at ../master/Configure line 277.
So instead, use a construction that makes the caller glob() use
File::Glob::bsd_glob().
Note that we're still excluding VMS, as it's directory specs use '['
and ']', which have a different meaning with bsd_glob and would need
some extra quoting. This might change, but later.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4040)
Remove references to it in documentation.
Unfortunately, it is too late to renumber symbols in libcrypto.num
and avoid the NOEXIST entry there.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3860)
This symbol was added in commit d33b215b33
but was only used in certain (presumed uncommon) preprocessor conditionals,
as no build failures have been reported yet.
Reported by Balaji Marisetti.
Closes: #4029
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4030)
Clean up some true/false returns
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4001)
Fix typo in NOTES.WIN: this -> these
Fix wrong capital letter in certificates.txt
Make number of characters in each line more even
Remove redundant empty line
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3986)
Instead of setting a "magic" global variable to force RAND to keep
consistent state and always generate the same bytestream, have
the fuzzing code install its own RAND_METHOD that does this. For
BN_RAND_DEBUG, we just don't do it; that debugging was about mucking
with BN's internal representation, not requiring predictable rand
bytes.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4025)
that needed test_main now works using the same infrastructure as tests that used
register_tests.
This meant:
* renaming register_tests to setup_tests and giving it a success/failure return.
* renaming the init_test function to setup_test_framework.
* renaming the finish_test function to pulldown_test_framework.
* adding a user provided global_init function that runs before the test frame
work is initialised. It returns a failure indication that stops the stest.
* adding helper functions that permit tests to access their command line args.
* spliting the BIO initialisation and finalisation out from the test setup and
teardown.
* hiding some of the now test internal functions.
* fix the comments in testutil.h
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3953)
$(SHLIB_MAJOR).$(SHLIB_MINOR) is really a synonym for
$(SHLIB_VERSION_NUMBER), and is therefore an added complexity,
so better to use $(SHLIB_VERSION_NUMBER) directly. SHLIB_MAJOR and
SHLIB_MINOR are now unused, but are kept around purely as information
in case someone relies on their existence.
At the same time, add support for custom shared library extensions
with the three new Makefile variables SHLIB_EXT, SHLIB_EXT_SIMPLE and
SHLIB_EXT_IMPORT. By default, they hold the variants of shared
library extensions we support. On mingw and cygwin, SHLIB_EXT_IMPORT
is defined; on all other Unix platforms, it's empty.
An example to get shared libraries with a slightly different SOVER name:
$ make SHLIB_EXT='.$(SHLIB_VERSION_NUMBER).so'
Fixes#3902
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3964)
Print the parameters for scrypt PBKDF when used in PKCS#12 files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1334)
The info printing for PBES2 already uses space after type and commas to
separate items in the line so use the same format for MAC info too.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1334)
Since scrypt PBKDF can be used both in PKCS#5 and PKCS#12 files,
do share the code between them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1334)
