Also ensure that opt_intmax() and opt_uintmax() does the right thing
if sizeof([u]intmax_t) is smaller than sizeof(ossl_[u]intmax_t).
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15825)
These definitions were located away from our definitions of other
sized int and uint types. Also, the fallback typedef wasn't quite
correct, and this changes it to be aliases for int64_t and uint64_t,
since those are the largest integers we commonly handle.
We also make sure to define corresponding numbers: OSSL_INTMAX_MIN,
OSSL_INTMAX_MAX and OSSL_UINTMAX_MAX
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15825)
Signed-off-by: Martin Schwenke <martin@meltin.net>
Signed-off-by: Amitay Isaacs <amitay@ozlabs.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15798)
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15798)
These work fine on Linux but break the build on AIX.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15798)
mtvsrd/mfvsrd are ISA >= 2.07 only, so this won't work for older
CPUs.
It would be possible to use this scheme only in the ISA >= 3.0
implementation. However, in the future it may be possible for newer
ISAs to allow CPU implementations without a vector unit, so don't
bother. The performance improvement versus using the stack was small
anyway.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15798)
No need to save/restore because it is volatile.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15798)
This is done in other versions due to the possibility of an early
return. However, there is no early return here.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15798)
64-bit alignment at the beginning of functions, 32-bit alignment for
loop targets.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15798)
This works on Linux but breaks the build on AIX.
Fixes#15748
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15798)
I can't see way of making Configure fail but this at least makes the
build fail.
Fixes#15821
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15831)
app_malloc() terminates execution if the allocation fails. The tests implement
their own app_malloc() in an attempt to reduce the amount of code pulled in.
This version also needs to terminate on failed allocation. The alternative
would be adding failed allocation checks pervasively throughout the apps's
commands.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15836)
This is a request from the lab that changes the AES_GCM test back to perform both a encrypt and
decrypt. (This makes no logical sense since this is not an inverse cipher).
I have left the AES_ECB decrypt test in (although it may not be needed)
since it is actually testing the inverse cipher case.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15844)
AIX reported warnings of the form:
1506-207 (W) Integer constant 0x8080808080808080u out of range.
This truncation causes all startup self tests related to AES to fail.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15842)
Fixes coverity 1486070 through 1486077 and 1486079
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15841)
- Use SSL_set_ciphersuites for TLS 1.3 tests instead of using
SSL_set_cipher_list.
- Don't bother passing a sequence number size to KTLS test functions.
These functions always test TLS (and not DTLS) for which the
sequence size is always the same. In addition, even for DTLS the
check in question (verifying that the sequence number fields in SSL
do not change) should still pass when doing a before/after
comparison of the field.
- Define a helper structure to hold the TLS version and cipher name
for a single KTLS test.
- Define an array of such structures with valid KTLS ciphers and move
#ifdef's for TLS versions and supported ciphers out of test
functions and instead use them to define the valid members of this
array. This also permits using TLS 1.3 cipher suite names for
TLS 1.3 tests.
- Use separate tests per cipher for test_ktls to give more
fine-grained pass/fail results as is already done for
test_ktls_sendfile.
- While here, rename test_ktls_sendfile to execute_test_ktls_sendfile
and test_ktls_sendfile_anytls to test_ktls_sendfile. This is more
consistent with the naming used for test_ktls as well as other tests
in this file.
- Close the file descriptors used for temporary sockets in ktls tests.
- Don't assume that KTLS is supported for all compile-time supported
cipher suites at runtime. If the kernel fails to offload a given
cipher suite, skip the test rather than failing it. FreeBSD kernels
may not offload all of the cipher suites supported by its KTLS if a
suitable driver or KTLS backend is not present.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15814)
OSSL_STORE_open_ex() could result in reports like this:
80722AA3927F0000:error:80000002:system library:file_open_ex:No such file or directory:engines/e_loader_attic.c:1016:calling stat(file:test/blahdibleh.der)
80722AA3927F0000:error:41800069:lib(131)::path must be absolute:engines/e_loader_attic.c:1010:test/blahdibleh.der
80722AA3927F0000:error:1600007B:STORE routines:OSSL_STORE_open_ex:no loaders found:crypto/store/store_lib.c:148:No store loaders were found. For standard store loaders you need at least one of the default or base providers available. Did you forget to load them?
The last one turns out to be a bit too generically reported. It
should only be reported when no loader were loaded at all, not when
loader_ctx happens to be NULL (which may happen for other reasons).
We also move the helpful message to the OSSL_STORE_LOADER fetcher.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15820)
Depending on circumstances, something like this:
ok(run(app(['openssl', 'whatever', '-config', '""', ...])))
might end up with a command like this:
./util/wrap.pl apps/openssl whatever -config '""'
Simply use an empty string (i.e. '' instead of '""') and let the
command line fixup functions do their job.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15822)
Found in #15815
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15819)
Converting doubles to integers used to go via intmax_t which isn't properly
defined on some platforms. The alternative is to go via int64_t.
Fixes#15815
Alternative to #15816
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15817)
Fixes#15804
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15807)
Perl's system() on VMS needs to have the command line properly fixed
up, even with arguments passed in list form. We arrange that by
having util/wrap.pl use the same command line fixups as OpenSSL::Test.
As a consequence, util/wrap.pl needs to be generated, to easily pick
up data from configdata.pm. This also removes yet another file
copying hack from the build file templates.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15791)
The command line quotifier is more useful as a common utility, so it
gets moved to OpenSSL::Util, as the following two functions:
fixup_cmd_elements(), which is the generic command line reformatter
fixup_cmd(), which is like fixup_cmd_elements(), but treats the first
element specially where necessary (such as on VMS).
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15791)
