Since SSLfatal() doesn't take a function code any more, we drop that
argument everywhere. Also, we convert all combinations of SSLfatal()
and ERR_add_data() to an SSLfatal_data() call.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13316)
DTLS by design ignores records/packets with bad MAC or failed AEAD tag
validation. However, recent changes to have provided cipher
implementations caused tls1_enc() to leave an entry on the error queue
for invalid GCM tags, e.g.:
800BEAEF487F0000:error::Provider routines:gcm_stream_update:cipher operation failed:providers/implementations/ciphers/ciphercommon_gcm.c:306
The BoringSSL tests check for entries on the error queue with
SSL_get_error() and so we were seeing spurious test failures
due to the additional item on the error queue. To avoid leaving
such spurious entries on the error queue, set a mark before calling
the ssl3_enc 'enc' method, and pop to that mark before ignoring
invalid packets.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13251)
Previously we passed it the data plus mac size. Now we just pass it the
data size. We already know the mac size.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12732)
This commit just moves the TLS1 and above implementation to use the TLS
HMAC implementation in the providers.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12732)
The TLS HMAC implementation should take care to calculate the MAC in
constant time in the case of MAC-Then-Encrypt where we have a variable
amount of padding.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12732)
errno is only valid if ktls_read_record() fails with a negative return
value.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12111)
We split these functions out into a separate file because we are
preparing to make this file shared between libssl and providers.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
For CBC ciphersuites using Mac-then-encrypt we have to be careful about
removing the MAC from the record in constant time. Currently that happens
immediately before MAC verification. Instead we move this responsibility
to the various protocol "enc" functions so that MAC removal is handled at
the same time as padding removal.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
HMACs used via the legacy EVP_DigestSign interface are strange in
that they use legacy codepath's which eventually (under the covers)
transform the operation into a new style EVP_MAC. This can mean the
digest in use can be a legacy one, so we need to be careful with any
digest we extract from the ctx.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11511)
Allow for encryption overhead in early DTLS size check
and send overflow if validated record is too long
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11096)
Now that libssl knows about libctx we should use it wherever we generate
a random number.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10927)
The decryption failed alert was deprecated a long time ago. It can
provide an attacker too much information to be able to distinguish between
MAC failures and decryption failures and can lead to oracle attacks.
Instead we should always use the bad_record_mac alert for these issues.
This fixes one instance that still exists. It does not represent a
security issue in this case because it is only ever sent if the record is
publicly invalid, i.e. we have detected it is invalid without using any
secret material.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10093)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
With the removal of SSLv2, the s3 structure is always allocated, so
there is little point in having it be an allocated pointer. Collapse
the ssl3_state_st structure into ssl_st and fixup any references.
This should be faster than going through an indirection and due to
fewer allocations, but I'm not seeing any significant performance
improvement; it seems to be within the margin of error in timing.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7888)
If we were using a different type of BIO than a socket BIO then
BIO_get_ktls_send() and BIO_get_ktls_recv() could return the wrong
result.
The above occurred even if KTLS was disabled at compile time - so we should
additionally ensure that those macros do nothing if KTLS is disabled.
Finally we make the logic in ssl3_get_record() a little more robust when
KTLS has been disabled.
[extended tests]
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8793)
This patch adds support for the Linux TLS Rx socket option.
It completes the previous patch for TLS Tx offload.
If the socket option is successful, then the receive data-path of the TCP
socket is implemented by the kernel.
We choose to set this option at the earliest - just after CCS is complete.
Change-Id: I59741e04d89dddca7fb138e88fffcc1259b30132
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
Previously when a ClientHello arrives with a valid cookie using
DTLSv1_listen() we only "peeked" at the message and left it on the
underlying fd. This works fine for single threaded applications but for
multi-threaded apps this does not work since the fd is typically reused for
the server thread, while a new fd is created and connected for the client.
By "peeking" we leave the message on the server fd, and consequently we
think we've received another valid ClientHello and so we create yet another
fd for the client, and so on until we run out of fds.
In this new approach we remove the ClientHello and buffer it in the SSL
object.
Fixes#6934
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7375)
At certain points in the handshake we could receive either a plaintext or
an encrypted alert from the client. We should tolerate both where
appropriate.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6887)
Previoulsy we just had max_early_data which controlled both the value of
max early_data that we advertise in tickets *and* the amount of early_data
that we are willing to receive from clients. This doesn't work too well in
the case where we want to reduce a previously advertised max_early_data
value. In that case clients with old, stale tickets may attempt to send us
more early data than we are willing to receive. Instead of rejecting the
early data we abort the connection if that happens.
To avoid this we introduce a new "recv_max_early_data" value. The old
max_early_data becomes the value that is advertised in tickets while
recv_max_early_data is the maximum we will tolerate from clients.
Fixes#6647
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6655)
The TLS code marks records as read when its finished using a record. The DTLS code did
not do that. However SSL_has_pending() relies on it. So we should make DTLS consistent.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6159)
Since the public and private DRBG are per thread we don't need one
per ssl object anymore. It could also try to get entropy from a DRBG
that's really from an other thread because the SSL object moved to an
other thread.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5547)
In the case of a protocol version alert being sent by a peer the record
version number may not be what we are expecting. In DTLS records with an
unexpected version number are silently discarded. This probably isn't
appropriate for alerts, so we tolerate a mismatch in the minor version
number.
This resolves an issue reported on openssl-users where an OpenSSL server
chose DTLS1.0 but the client was DTLS1.2 only and sent a protocol_version
alert with a 1.2 record number. This was silently ignored by the server.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5018)
The CCS may be sent at different times based on whether or not we
sent an HRR earlier. In order to make that decision this commit
also updates things to make sure we remember whether an HRR was
used or not.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4701)
Since return is inconsistent, I removed unnecessary parentheses and
unified them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4541)
Previously if a client received an HRR then we would do version negotiation
immediately - because we know we are going to get TLSv1.3. However this
causes a problem when we emit the 2nd ClientHello because we start changing
a whole load of stuff to ommit things that aren't relevant for < TLSv1.3.
The spec requires that the 2nd ClientHello is the same except for changes
required from the HRR. Therefore the simplest thing to do is to defer the
version negotiation until we receive the ServerHello.
Fixes#4292
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4527)
