When writing to a blocking quic stream, we sometimes get duplicate
transmitted data. This occurs when a call to quic_write_blocking has to
wait for space to become available in the ring buffer. When we do a
wait, the call sets *written to the value returned in args.total_written
as filled out by the calls to block_until_pred->quic_write_again.
However, the value there is based on the amount we requested, which is
only the remaining data that we didn't append in xso_sstream_write. So
if we call quic_write_blocking with a buffer of length X, and initially
append Y bytes, and write the remainig X-Y bytes via a block_until_pred
call, then *written will return with the value X-Y, even though we wrote
the full X bytes to the ring buffer.
Fix it by recording the initial amount appended into *written, and then
add the args.total_written value if we have to wait on more space
Fixesopenssl/project#924
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26023)
In case of memory allocation failure this
could happen.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/25994)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25972)
Also fixes a leak of pkey in error case for -verifyrecover.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/25987)
This pull request fixes a typo in the documentation.
The phrase "the are" has been corrected to "there are".
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25977)
It needs to be always displayed not just with -brief.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25959)
1. Add OSSL_FUNC_digest_copyctx_fn function for EVP_MD, which is used to copy algctx from the old EVP_MD_CTX to the new one.
2. Add implementation of OSSL_FUNC_digest_copyctx_fn function for default providers.
3. Modify EVP_MD_CTX_copy_ex: When the fetched digest is the same in in and out contexts, use the copy function to copy the members in EVP_MD_CTX if the OSSL_FUNC_digest_copyctx_fn function exists. Otherwise, use the previous method to copy.
4. Add documentation for OSSL_FUNC_digest_copyctx function in doc/man7/provider-digest.pod.
5. Add testcase.
Fixes#25703
Signed-off-by: wangcheng <bangwangnj@163.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25726)
macos-12 runners will be removed in December.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Hugo Landau <hlandau@devever.net>
(Merged from https://github.com/openssl/openssl/pull/25715)
lots of people may want to print params to a buffer. Make it part of
our api
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25630)
Adds trace messages for method store add/remove and fetch operations
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25630)
Adds tracing messages to the
init/teardown/gettable_params/get_params/query/unquery operations for a
provider
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25630)
the parameters in the function definitions use `siglen` not `sig_len`,
this fixes the doc text.
Signed-off-by: Alicja Kario <hkario@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25927)
Add a test to the quic_multistream test suite to reset a stream after
all data has been received by a given stream, ensuring that we don't
crash in the reset operation
Fixes#25410
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25910)
When calling SSL_stream_reset on a QUIC stream object that has received
all data that is expected to be sent (i.e. when the sender has sent a
STREAM frame with the FIN bit set), we encounter the following segfault:
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff7f0bd28 in ossl_quic_sstream_get_final_size (qss=0x0, final_size=0x0) at ssl/quic/quic_sstream.c:273
273 if (!qss->have_final_size)
(gdb) bt
0) 0x00007ffff7f0bd28 in ossl_quic_sstream_get_final_size (qss=0x0, final_size=0x0) at ssl/quic/quic_sstream.c:273
1) 0x00007ffff7ef65bf in quic_validate_for_write (xso=0x5555555efcb0, err=0x7fffffffd5e0) at ssl/quic/quic_impl.c:2513
2) 0x00007ffff7ef8ae3 in ossl_quic_stream_reset (ssl=0x5555555efcb0, args=0x0, args_len=0) at ssl/quic/quic_impl.c:3657
3) 0x00007ffff7ebdaa6 in SSL_stream_reset (s=0x5555555efcb0, args=0x0, args_len=0) at ssl/ssl_lib.c:7635
4) 0x0000555555557527 in build_request_set (
req_list=0x55555555ebd0 "neil1.txt neil2.txt neil3.txt neil4.txt neil5.txt neil6.txt neil7.txt neil8.txt neil9.txt neil10.txt neil11.txt neil12.txt neil13.txt neil14.txt neil15.txt neil16.txt neil17.txt neil18.txt neil19.txt "..., ssl=0x5555555b6f80)
at demos/guide/quic-hq-interop.c:545
5) 0x00005555555587b2 in main (argc=4, argv=0x7fffffffe568) at demos/guide/quic-hq-interop.c:941
This occurs because:
1) When the stream FIN bit is set, the quic stack frees the underlying
stream structures immediately within the QUIC stack
and
2) when SSL_stream_reset is called, the call stack indicates we call
quic_validate_for_write, which attempts to access the
xso->stream->sstream QUIC_SSTREAM object, which was already freed in
(1)
The fix I think is pretty straightforward. On receipt of a STREAM frame
with a FIN bit set, the QUIC stack sets the QUIC_STREAM object state to
QUIC_SSTREAM_STATE_DATA_RECVD, which means we can use that state to
simply assert that the stream is valid for write, which allows it to be
reset properly.
Fixes#25410
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25910)
Run them all after 02:00 UTC.
Add possibility to run them on workflow_dispatch.
Add branch 3.4 to the coveralls.yml.
Remove the branches from os-zoo.yml as it is
possible to run on them manually from workflow_dispatch.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/25765)
Free the internal copy of parameter `value` on each early
exit.
Fixes#25906
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25926)
Otherwise we will calculate an incorrect header
size for higher stream ids and won't fit the
frame into the packet.
Fixes#25417
Reviewed-by: Saša Nedvědický <sashan@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25928)
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@devever.net>
(Merged from https://github.com/openssl/openssl/pull/22528)
Calling the functions SSL_CTX_set_cipher_list() or SSL_set_cipher_list() will
return the error "no cipher match" if no TLSv1.2 (or below) ciphers are enabled
after calling them. However this is normal behaviour for QUIC objects which do
not support TLSv1.2 ciphers. Therefore we should suppress that error in this
case.
Fixes#25878
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25886)
Setting a new_session_cb should work for a QUIC object just as it does
with a normal TLS object.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25874)
When processing a callback within libssl that applies to TLS the original
SSL object may have been created for TLS directly, or for QUIC. When making
the callback we must make sure that we use the correct SSL object. In the
case of QUIC we must not use the internal only SSL object.
Fixes#25788
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25874)
In some cases a QUIC SSL_CONNECTION object needs to get hold of a reference
to the original SSL object as created by the user. We should keep a
reference to it.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25874)
param->ctrl translation: Fix fix_ecdh_cofactor()
In POST_PARAMS_TO_CTRL state the fix_ecdh_cofactor() function should
return value in ctx->p1
param->ctrl translation: fix evp_pkey_ctx_setget_params_to_ctrl
return
Since some of the ctrl operations may return 0 as valid value
(e.g. ecdh_cofactor value 0 is valid setting), before colling
POST_PARAMS_TO_CTRL, we need to check return value for 0 as well
otherwise the evp_pkey_ctx_setget_params_to_ctrl function fails
without a chance to fix the return value
param->ctrl translation: Set ecdh_cofactor default action_type GET
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22587)
Indent namingAuthority section with two spaces to match the parent
node.
Signed-off-by: oleg.hoefling <oleg.hoefling@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25814)
When sk_GENERAL_NAME_reserve() fails, ialt is not freed.
Add the freeing operation in the common error path.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25876)
There are several calls to sk_GENERAL_NAME_free() where the argument is
actually NULL, there are not necessary.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25877)
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25847)
Fix cases where `int` argument was passed instead of `size_t`.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25857)
We should not have an example showing the default_md as md5.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25856)
Also add brainpool curves
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25821)
