Merge the NOTES section into the relevant parts of the manpage.
Add the $EXTRA parameter in consistent places (the end) to call
commands. Document that multiple -extra-XXX might be needed.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11338)
SM2 IDs are now passed entirely as '-pkeyopt', '-sigopt' or '-vfyopt'
values, just like any other valid option.
Fixes#11293
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/11302)
This removes "req" as the hardwired section for the req command.
Doing this will let us merge some test configs.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11249)
Add a -provider option to allow providers to be loaded. This option can be
specified multiple times.
Add a -provider_path option to allow the path to providers to be specified.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11167)
With the introduction of provider command line options which are applicable to
almost all of the command line tools, it seemed reasonable to make them all
generated. This simplifes the .gitignore and avoids having to keep two lists
in sync.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11167)
The default is openssl.cnf The project seems to prefer xxx.conf these
days, but we should use the default convention.
Rename all foo.conf (except for Configurations) to foo.cnf
Fixes#11174
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11176)
The find-doc-nits complains about non-zero word and about missing
line before =head1 which causes build failure.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11231)
CAkeyform may be set to PEM, DER or ENGINE, but the current options
are not using the proper optionformat 'E' (OPT_FMT_PDE) for this.
Set the valtype for CAkeyform to 'E' and use OPT_FMT_PDE when extracting
the option value.
This amends 0ab6fc79a9 ("Fix regression on x509 keyform argument") which
did the same thing for keyform and changed the manpage synopsis entries
for both keyform and CAkeyform but did not change the option section.
Hence, change the option section for both of them.
CLA: trivial
Co-developed-by: Torben Hohn <torben.hohn@linutronix.de>
Signed-off-by: Torben Hohn <torben.hohn@linutronix.de>
Signed-off-by: Bastian Germann <bage@linutronix.de>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11085)
Add options to change the parameter encoding and point conversions for EC
public and private keys. These options are present in the deprecated 'ec'
utility.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11113)
Specifically, refer from the deprecated tools to the pkey equivalents.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11113)
OpenSSL 1.1.0 has extended option checking, and rejects passing a PKCS#11
engine URL to "-signkey" option. The actual code is ready to take it.
Change the option parsing to allow an engine URL to be passed and modify
the manpage accordingly.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11086)
speed is updated to not support DSA instead of being removed.
The dhparam, dsaparam, dsa and gendsa commands are deprecated but still
exist without NO_DEPRECATED defined.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10977)
Add -standard-commands option to list command (documented)
Update standard commands list in openssl.pod
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10972)
Update CHANGES to have a complete and uniform description.
Fixes#9730
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10972)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10191)
Refactor common flags for SSL/TLS connection options.
Update SSL_CONF_cmd.pod to match ordering.
Rewrite much of the documentation.
Fixes#10160
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10191)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10873)
Add cmd-nits make target.
Listing options should stop when it hits the "parameters" separator.
Add missing .pod.in files to doc/man1/build.info
Tweak find-doc-nits to try openssl-XXX before XXX for POD files and
change an error messavge to be more useful.
Fix the following pages: ca, cms, crl, dgst, enc,
engine, errstr, gendsa, genrsa, list, ocsp, passwd, pkcs7, pkcs12, rand,
rehash, req, rsautil, s_server, speed, s_time,
sess_id, smime, srp, ts, x509.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10873)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10873)
Move the x509_V_ERR_xxx definitions from openssl-verify to
X509_STORE_CTX_get_error.pod. Add some missing ones. Consistently
start with a lowercase letter, unless it's an acronym.
Fix some markup mistakes in X509_verify_cert.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10132)
Replace "=for openssl foreign manuals" with simpler syntax, it looks
like the "=for openssl ifdef" construct.
Fix some broken L<> links; add some missing foreign references and fixed
some typo's.
The WARNINGS in dhparam referred to non-existant commands so reword it.
Fixes#10109
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10256)
Added an API to optionally set a self test callback.
The callback has the following 2 purposes
(1) Output information about the KAT tests.
(2) Allow the ability to corrupt one of the KAT's
The fipsinstall program uses the API.
Some KATS are not included in this PR since the required functionality did not yet exist in the provider.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10374)
Common wording courtesy Richard Levitte.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10128)
Also clarify the description of the options.
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10259)
In OpenSSL pre 1.1.0, 'openssl x509 -keyform engine' was possible
and supported. In 1.1.0, type of keyform argument is OPT_FMT_PEMDER
which doesn't support engine. This changes type of keyform argument
to OPT_FMT_PDE which means PEM, DER or engine and updates the manpage
including keyform and CAkeyform.
This restores the pre 1.1.0 behavior.
This issue is very similar than https://github.com/openssl/openssl/issues/4366
CLA: trivial
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10609)
Also, turn missing L<foo(3)> into foo(3)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10104)
Add openssl-env.pod
Also fix up many other environment page formatting nits.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10135)
OpenSSL 1.1.1 introduced a new CSPRNG with an improved seeding
mechanism, which makes it dispensable to define a RANDFILE for
saving and restoring randomness. This commit removes the RANDFILE
declarations from our own configuration files and adds documentation
that this option is not needed anymore and retained mainly for
compatibility reasons.
Fixes#10433
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10436)
Add documentation for all commands that have parameters.
Fix a couple of minor doc and programming bugs, too.
Fixes#10313
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10371)
Replace L<> link to header-file with a C<> reference.
Change some broken L<provider(3)> links to L<provider(7)>.
For consistency, rename four cipher pages to have a specific mode.
Fix up all references to any "generic" names to point to specific names.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10100)
Add sections (almost always "(3)" to L<> references that were missing
them. Among other things, this
Fixes: #10226
Also remove two references to non-existant manpages that have never
existed, and with the 3.0 structure, are unlikely to do so.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10240)
Use new doc-build capabilities
Add -i flag to dofile.
Add doc/man1 to SUBDIRS for the new templated doc files
Rewrite commit a397aca (merged from PR 10118) to use the doc-template stuff.
Put template references in common place
Template options and text come at the end of command-specific options:
opt_x, opt_trust, opt_r (in that order).
Refactor xchain options.
Do doc-nits after building generated sources.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10159)
Add P12 format description.
Remove PEM NOTES sections; it's in openssl.pod
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10142)
Options moved: -rand, -writerand, -CApath, -CAfile, -no-CApath, -no-CAfile
Added rand to dgst and srp manpages (they were missing them).
New sections in openssl.pod: Random State Options, Trusted Certificate
Options.
Cleanup and add comments to find-doc-nits
Remove ".in" file support; unless giving specific arguments, this
only runs after configuration
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10118)
Add a new API to test for primes that can't be misused, deprecated the
old APIs.
Suggested by Jake Massimo and Kenneth Paterson
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #9272
OpenSSL uses some POD directives masquerading as 'comment'
('=for comment' etc). This is abusive and confusing. Instead, we use
our own keyword.
=for openssl whatever
=begin openssl
whatever
=end openssl
(we have never used the multiline form, but might start one day)
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10048)
Always refer to openssl.pod instead of repeating the same description
everywhere.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10126)
Better synopsis for 'openssl dgst' and 'openssl enc', correct names
for 'openssl rehash' ('c_rehash' is mentioned there too), correct
option end marker for 'openssl verify', and finally, refer to
sub-commands as sub-commands.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
"gost" was called "ccgost".
"rsax" was treated like literal input rather than an engine name.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
Almost all OpenSSL commands are in reality 'openssl cmd', so make sure
they are refered to like that and not just as the sub-command.
Self-references are avoided as much as is possible, and replaced with
"this command". In some cases, we even avoid that with a slight
rewrite of the sentence or paragrah they were in. However, in the few
cases where a self-reference is still admissible, they are done in
bold, i.e. openssl-speed.pod references itself like this:
B<openssl speed>
References to other commands are done as manual links, i.e. CA.pl.pod
references 'openssl req' like this: L<openssl-req(1)>
Some commands are examples rather than references; we enclose those in
C<>.
While we are it, we abolish "utility", replacing it with "command", or
remove it entirely in some cases.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
Quite a lot of replacables were still bold, and some options were
mentioned without a beginning dash.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
Ellipses were used to express that the '-rand' value can specify
multiple files, like this:
B<-rand> I<file...>
Because there are conventions around ellipses, this becomes confusing,
because '-rand file...' is normally intepreted to mean that
'-rand file1 file2 file3' would be processed as three randomness
files, which makes no sense.
Rather than making things complicated with more elaborate syntax, we
change it to:
B<-rand> I<files>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
Also patch find-doc-nits to ignore a Microsoft trademark and not
flag it as a spelling error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10023)
Make find-doc-nits understand that
=for comment ifdef ssl3 ...
in a POD page means that the "-ssl3" flag might be ifdef'd out in the
local environment, and not to complain about it.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9974)
For documentation of all commands with "-flag arg" format them
consistently: "B<-flag> I<arg>", except when arg is literal
(for example "B<-inform> B<PEM>|B<DER>")
Update find-doc-nits to complain if badly formatted strings are found.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10022)
If the SM2 ID value has not been passed correctly when signing an SM2
certificate/certificate request, a double free occurs. For instance:
openssl req -x509 ... -sm2-id 1234567812345678
The '-sm2-id' should not be used in this scenario, while the '-sigopt' is
the correct one to use. Documentation has also been updated to make the
options more clear.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9958)
Commit b6b66573 (PR #9679) renamed most POD files. This change causes
find-doc-nits to flag misnamed files.
Also fix the two misnamed files that it found.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10000)
Remove -c/-e/-m aliases, OpenSSL commands don't do that.
Fix typo's in the documentation.
Fix -module flag to print the right thing.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9986)
The dgst command allows MACs to be calculated, the mac command is the more
recent interface for doing the same and provides better access to a wider
range of MACs.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9962)
Remove reference to EVP_KDF_ctrl_str and replace it with EVP_KDF_CTX_set_params.
Add missing links, and specify two extra KDFs.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9905)
This command is somewhat similar to 'openssl engine', but displays
what it can about the given providers.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9697)
'openssl version -r' prints the seed source based on compiler macros.
This does not necessarily reflect the library's idea of what seed
sources to use, so we reimplement the list of seed sources as a
OPENSSL_info() item and display that instead.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9689)
Change find-doc-nits to complain if a section header is repeated,
within a parent header (i.e., duplicate =head2 within a =head1).
In almost all cases, we just remove the duplicate header, as
it was a "continuation" of the =head1 that was already in affect.
In some cases, just remove "=head1 NOTES", possibly moving text
around, because the "NOTES" were really important parts of the
DESCRIPTION section.
No =headX sections should end with a period.
All =head1 labels should be in all uppercase.
No sub-head (=head2, etc) should be in all uppercase.
Update find-doc-nits to reject the above.
Fixup an internal POD link
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9631)
Initially, the manual page entry for the 'openssl cmd' command used
to be available at 'cmd(1)'. Later, the aliases 'openssl-cmd(1)' was
introduced, which made it easier to group the openssl commands using
the 'apropos(1)' command or the shell's tab completion.
In order to reduce cluttering of the global manual page namespace,
the manual page entries without the 'openssl-' prefix have been
deprecated in OpenSSL 3.0 and will be removed in OpenSSL 4.0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9666)
The current EVP_PEKY_ctrl for SM2 has no capability of parsing an ID
input in hexdecimal.
The newly added ctrl string is called: sm2_hex_id
Test cases and documentation are updated.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9584)
And update find-doc-nits to complain if "=head1 EXAMPLE" is found.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9602)
With the diverse {get,set}table_params functions, it's possible to
give a more verbose description of the diverse algorithm
implementations. Most notably, we add a description of the parameters
that each implementation is willing to share.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9576)
Fixup INSTALL and a couple man pages to get rid of "the the" and "in the
in the".
CLA: trivial
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9563)
This avoids leaking bit 0 of the private key.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/9363)
3.0.0 is a habit from pre-3.0 OpenSSL, which doesn't make sense with
the new version scheme.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9376)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9288)
SM2 certificate signing request can be created and signed by OpenSSL
now, both in library and apps.
Documentation and test cases are added.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9085)
Add new option '-http_server_binmode' which allows the server to open and send
binary files as well as text.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8811)
Other commands like 'req' support -verbose, so why not gendsa and dsaparam?
Part of a larger and more ambitious effort to add -verbose to all apps
that might be used in scripts and need to otherwise run silently (well,
without belching out anything that isn't a warning or error... which ties
into a later scrub of using STDOUT were appropriate for informative
messages instead of STDERR)... so that scripts also have the option of
doing >/dev/null without losing anything critical.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6908)
Other commands like 'req' support -verbose, so why not genrsa?
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6897)
OpenSSL_version(OPENSSL_DIR) gives you a nicely formatted string for
display, but if all you really want is the directory itself, you were
forced to parsed the string.
This introduces a new function to get diverse configuration data from
the library, OPENSSL_info(). This works the same way as
OpenSSL_version(), but has its own series of types, currently
including:
OPENSSL_INFO_CONFIG_DIR returns OPENSSLDIR
OPENSSL_INFO_ENGINES_DIR returns ENGINESDIR
OPENSSL_INFO_MODULES_DIR returns MODULESDIR
OPENSSL_INFO_DSO_EXTENSION returns DSO_EXTENSION
OPENSSL_INFO_DIR_FILENAME_SEPARATOR returns directory/filename separator
OPENSSL_INFO_LIST_SEPARATOR returns list separator
For scripting purposes, this also adds the command 'openssl info'.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8709)
This fixes the "verifying the alias" case.
Actually, while working on it, I realized that conceptually we were
testing the 2 different behaviours of `EC_GROUP_check_named_curve()` at
the same time, and actually not in the proper way.
I think it's fair to assume that overwriting the curve name for an
existing group with `NID_undef` could lead to the unexpected behaviour
we were observing and working around.
Thus I decided to separate the lookup test in a dedicated simpler test
that does what the documentation of `EC_GROUP_check_named_curve()`
suggests: the lookup functionality is meant to find a name for a group
generated with explicit parameters.
In case an alternative alias is returned by the lookup instead of the
expected nid, to avoid doing comparisons between `EC_GROUP`s with
different `EC_METHOD`s, the workaround is to retrieve the `ECPARAMETERS`
of the "alias group" and create a new explicit parameters group to use
in `EC_GROUP_cmp()`.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8555)
Modify openssl OCSP utility to produce certIDs in responses using other
hash algorithms (e.g. SHA256).
Added option -rcid for this purpose.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5274)
The output format now matches coreutils *dgst tools.
[ edited to remove trailing white space ]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8578)
This follows #8321 which added the SM2 certificate verification feature.
This commit adds the related docs - the newly added 2 APIs and options
in apps/verify.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8465)
not specifying the digest both on command line and in the config file
will lead to response generation aborting with
140617514493760:error:2F098088:time stamp routines:ts_CONF_lookup_fail: \
cannot find config variable:crypto/ts/ts_conf.c:106:tsr_test::signer_digest
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8421)
DSA can accept other digests other than SHA1. EC ignores the digest option
altogether.
Fixes#8425
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8432)
Complete and improve error output of parse_name() in apps/apps.c
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8193)
With the recent addition of the -rawin option it should be possible for
pkeyutl to sign and verify with Ed448 and Ed2559. The main remaining
stumbling block is that those algorirthms only support "oneshot" operation.
This commit enables pkeyutl to handle that.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8431)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8447)
Some signature algorithms require special treatment for digesting, such
as SM2. This patch adds the ability of handling raw input data in
apps/pkeyutl other than accepting only pre-hashed input data.
Beside, SM2 requries an ID string when signing or verifying a piece of data,
this patch also adds the ability for apps/pkeyutil to specify that ID
string.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8186)
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8175)
The only thing that makes an ENGINE module special is its entry
points. Other than that, it's a normal dynamically loadable module,
nothing special about it. This change has us stop pretending anything
else.
We retain using ENGINE as a term for installation, because it's
related to a specific installation directory, and we therefore also
mark ENGINE modules specifically as such with an attribute in the
build.info files.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8147)
Trim trailing whitespace. It doesn't match OpenSSL coding standards,
AFAICT, and it can cause problems with git tooling.
Trailing whitespace remains in test data and external source.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8092)
When computing the end-point shared secret, don't take the
terminating NULL character into account.
Please note that this fix breaks interoperability with older
versions of OpenSSL, which are not fixed.
Fixes#7956
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7957)
The option -twopass to the pkcs12 app is ignored if -passin, -passout
or -password is used. We should complain if an attempt is made to use
it in combination with those options.
Fixes#8107
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8114)
A CAdES Basic Electronic Signature (CAdES-BES) contains, among other
specifications, a collection of Signing Certificate reference attributes,
stored in the signedData ether as ESS signing-certificate or as
ESS signing-certificate-v2. These are described in detail in Section 5.7.2
of RFC 5126 - CMS Advanced Electronic Signatures (CAdES).
This patch adds support for adding ESS signing-certificate[-v2] attributes
to CMS signedData. Although it implements only a small part of the RFC, it
is sufficient many cases to enable the `openssl cms` app to create signatures
which comply with legal requirements of some European States (e.g Italy).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7893)
1) Add two new flags (-proxy_user & -proxy_pass) to s_client to add support for basic (base64) proxy authentication.
2) Add a "Proxy-Connection: Keep-Alive" HTTP header which is a workaround for some broken proxies which otherwise close the connection when entering tunnel mode (eg Squid 2.6).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7975)
While stereotyped repetitions are frowned upon in literature, they
serve a useful purpose in manual pages, because it is easier for
the user to find certain information if it is always presented in
the same way. For that reason, this commit harmonizes the varying
formulations in the HISTORY section about which functions, flags,
etc. were added in which OpenSSL version.
It also attempts to make the pod files more grep friendly by
avoiding to insert line breaks between the symbol names and the
corresponding version number in which they were introduced
(wherever possible). Some punctuation and typographical errors
were fixed on the way.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7854)
There was a trailing :w at a line, which didn't make sense in context
of the sentence/styling. Removed it, because I think it's a leftover
vi command.
CLA: trivial
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7875)
