Fixes#18226.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18331)
+ Always undef the symbols that may have been #define-d
by wincrypt.h after the first inclusion of types.h to
avoid errors from wincrypt.h symbols being used to
compile OpenSSL code
+ Also need to remove #pragma once for this approach to work
+ Define WINCRYPT_USE_SYMBOL_PREFIX to enable wincrypt
symbol prefix at some point in future
Fixes#9981
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/18131)
This fixes a glitch in the non-verbose test output
$ make test
[...]
80-test_ciphername.t .... ok
80-test_cmp_http.t ...... 5/?
80-test_cmp_http.t ...... ok 611
80-test_cms.t ........... ok
80-test_cmsapi.t ........ ok
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18401)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18407)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18368)
Fixes#18306
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18351)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16237)
When a socket connection is done using BIO_new_connect,
the ktls_enable is done too early, and fails with ENOTCONN.
Therefore the KLTS ioctl will fail later with ENOPROTOOPT.
Fix that by doing the ktls_enable after the connection
succeeded, not when the socket is created as that will
always fail.
One example where this happens is doit_localhost in
test/ssl_old_test.c, and therefore, contrary to the expectation
the -client_ktls option did never enable the client KTLS
connection, but this was not noticed, because there was no
diagnostic output, and it was only visible with strace output.
Also enhanced the ssl_old_test -client_ktls/-server_ktls
options together with -v option to print a summary line
if and how KTLS was negotiated in server and client.
While I am already there adjusted the usage info of
the -s_cert, -s_key commands, and allow -time to print the
timings of ktls connections.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18318)
It also allows for passing -DOPENSSL_NO_LOCALE as a workaround
to ./Configure command.
Fixes#18233
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18282)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18269)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18254)
This is in line with the NEWS entry (erroneously) announcing such for 3.0.
Fixes#18194
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/18236)
This is a false positive resulting from confusion over up_ref/free.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/18014)
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18220)
A copy&paste error meant that the RC4-MD5 cipher (used in TLS) used the TLS
AAD data as the MAC key.
CVE-2022-1434
Fixes#18112
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
The "-no_cert_checks" option causes the flag OCSP_NOCHECKS to be set.
The bug fixed in the previous commit will cause the ocsp app to respond with
a success result in the case when the OCSP response signing certificate
fails to verify and -no_cert_checks is used - so we test that it fails in
this case.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This memory leak is triggered when configuring with 'no-legacy'
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/18179)
This fixes an internal error alert from the server and
an unexpected connection failure in the release version,
but a failed assertion and a server crash in the
debug version.
Reproduce this issue with a DTLS server/client like that:
./openssl s_server -dtls -mtu 1500
./openssl s_client -dtls -maxfraglen 512
In the debug version a crash happens in the Server now:
./openssl s_server -dtls -mtu 1500
Using default temp DH parameters
ACCEPT
ssl/statem/statem_dtls.c:269: OpenSSL internal error: Assertion failed: len == written
Aborted (core dumped)
While in the release version the handshake exceeds the
negotiated max fragment size, and fails because of this:
$ ./openssl s_server -dtls -mtu 1500
Using default temp DH parameters
ACCEPT
ERROR
4057152ADA7F0000:error:0A0000C2:SSL routines:do_dtls1_write:exceeds max fragment size:ssl/record/rec_layer_d1.c:826:
shutting down SSL
CONNECTION CLOSED
From the client's point of view the connection fails
with an Internal Error Alert:
$ ./openssl s_client -dtls -maxfraglen 512
Connecting to ::1
CONNECTED(00000003)
40B76343377F0000:error:0A000438:SSL routines:dtls1_read_bytes:tlsv1 alert internal error:ssl/record/rec_layer_d1.c:613:SSL alert number 80
and now the connection attempt fails unexpectedly.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18093)
Currently we do not have any way to retrieve these values once set.
Fixes#18035.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18038)
This removes a guard condition that prevents KTLS being enabled for
receiving in TLS 1.3. Use the correct sequence number and BIO for
receive vs transmit offload.
Co-authored-by: John Baldwin <jhb@FreeBSD.org>
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17942)
CLI changes: New parameter -digest to CLI command openssl cms, to
provide pre-computed digest for use with -sign.
API changes: New function CMS_final_digest(), like CMS_final() but
uses a pre-computed digest instead of computing it from the data.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/15348)
This refactors OSSL_LIB_CTX to avoid using CRYPTO_EX_DATA. The assorted
objects to be managed by OSSL_LIB_CTX are hardcoded and are initialized
eagerly rather than lazily, which avoids the need for locking on access
in most cases.
Fixes#17116.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17881)
This function takes arguments a & b and computes a / b rounding any
remainder up.
It is safe with respect to overflow and negative inputs. It's only fast for
non-negative inputs.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17884)
For TLSv1.3, limit ticket lifetime hint to 1 week per RFC8446
Fixes#17948
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17952)
Both are false positives, but better to be rid of them forever than ignoring
them and having repeats.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17895)
Fixes#17869.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17870)
Provide a different mechanism to indicate that the application wants
to retry the verification. The negative result of the callback function
now indicates an error again.
Instead the SSL_set_retry_verify() can be called from the callback
to indicate that the handshake should be suspended.
Fixes#17568
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17825)
Supports Linux, MacOS and FreeBSD
Disabled by default, enabled via `enabled-tfo`
Some tests
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8692)
Including running the oqsprovider external test in the
CI external test build.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17832)
Fixes an issue where, when the test suite was being run with the older
Test::Harness package, the test suite would not complete correctly due
to evaluation of $harness->runtests()->has_errors, which is only
available for the newer TAP::Parser::Aggregator code path.
Fixes#17818.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17823)
Set the environment variable MALLOC_PERTURB_ during tests to perturb the
output from OPENSSL_malloc() calls (see the mallopt man page for details
about this environment variable). This could be a low cost way of spotting
uninit reads in "make test" runs in some situations.
In tests I have found it to be a little unreliable (sometimes it seemed to
not perturb the output for inexplicable reasons) - but since this is easy
to implement I think it is worthwhile.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17768)
This fixes a bug whereby BN_mod_exp2_mont can dereference a NULL pointer
if BIGNUM argument m represents zero.
Regression test added. Fixes#17648.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17783)
`openssl req -x509` has code allowing it to generate certificates from CSRs
as a replacement for `openssl x509`, but a bug prevents it from working
properly. -CA and -CAkey can now be passed to generate a CA-signed
certificate as documented in openssl-req(1).
Regression testing has been added to `openssl req`.
Fixes#17736.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17782)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17763)
As the glue2bio() could return NULL pointer if fails,
it should be better to check the return value in order
to avoid the use of NULL pointer.
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17718)
Since the memory allocation may fail, the BIO_new_mem_buf() may
return NULL pointer.
Therefore, it should be better to check it and return error if fails.
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17730)
The SNI test in test_cert_cb_int() was always failing because it used
SSL_CTX_new() instead of SSL_CTX_new_ex() and was therefore not using the
correct libctx. PR #17739 amended the test to check the return value from
SSL_CTX_new() which made the failure obvious.
Fixes#17757
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/17758)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17740)
As the potential failure of the memory allocation, it should
be better to check the return value of SSL_CTX_new() and return
error if fails, like SSL_CTX_new_ex().
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17739)
Since the potential failure of the OSSL_PROVIDER_load(),
for example there is no lock, the provider could fail to
be loaded into the library context.
Therefore, it should be better to check it and return error
if fails.
Also, in order to avoid free unknown pointer, 'c' should be
initialized as NULL.
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/17729)
Prefix output of generated dh parameters to avoid misinterpretation
of lines beginning with ok[^a-zA-Z0-9] as a testresult.
Also corrected indent and removed useless comma after last item.
Fixes#17480
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17689)
As the potential failure of the memory allocation, the OPENSSL_strdup()
could return NULL pointer and then be assigned to 'server_ctx'.
In order to tell the callers the failure of the configuration, it should
be better to return error.
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17705)
Fixes#13944
Moved "opt_printf_stderr" out of apps.c to avoid duplicate definition in tests.
Added function "asn1_string_to_time_t" including tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17645)
In some corner cases the check for packets
which exceed the allowed record length was missing
when KTLS is initially enabled, when some
unprocessed packets are still pending.
Add at least some tests for KTLS, since we have
currently not very much test coverage for KTLS.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17504)
Since the potential failure of the memory allocation, the
OPENSSL_strdup() could return NULL pointer.
Therefore, it should be better to check it in order to guarantee the
success of the configuration, same as the check for
SSL_CTX_set_srp_username().
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17643)
Fixes#17649
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17652)
Since the memory allocation may fail, the 'mac_name' and 'controls'
could be NULL.
And the 'mac_name' will be printed in mac_test_run_mac() without check.
Also the result of 'params_n +
sk_OPENSSL_STRING_num(expected->controls)' in
mac_test_run_mac() will be 'params_n - 1' if allocation fails , which
does not make sense.
Therefore, it should be better to check them in order to guarantee the
complete success of initiation.
If fails, we also need to free the 'mdat' to avoid the memory leak.
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17628)
Including e_os.h with a path from a header file doesn't work well on
certain exotic platform. It simply fails to build.
Since we don't seem to be able to stop ourselves, the better move is
to move e_os.h to an include directory that's part of the inclusion
path given to the compiler.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17641)
Add copyright to files that were missing it.
Update license from OpenSSL to Apache as needed.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17606)
The private key for rsa, dsa, dh and ecx was being included when the
selector was just the public key. (ec was working correctly).
This matches the documented behaviour.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17200)
On a big endian machine, we get test failures in params_api_test like
# ERROR: (memory) 'buf1 == buf2' failed @ test/params_api_test.c:473
# --- buf1
# +++ buf2
# 0000:-e901
# 0000:+01e9
# ^^^^
#
# OPENSSL_TEST_RAND_ORDER=1643313367
not ok 157 - iteration 3
They are due to an additional conversion copy. Remove this copy to solve the
problem.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17608)
This function was previously incorrectly failing if it is called with
X509_PURPOSE_ANY. Add a test to catch this.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/17382)
Signed-off-by: Darshan Sen <raisinten@gmail.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17507)
When `PEM_write_bio_PKCS8PrivateKey()` was passed an empty passphrase
string, `OPENSSL_memdup()` was incorrectly getting used for 0 bytes size
allocation, which resulted in malloc failures.
Fixes: https://github.com/openssl/openssl/issues/17506
Signed-off-by: Darshan Sen <raisinten@gmail.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17507)
As the potential failure of the allocation, the sk_SCT_new_null() could
return NULL pointer if fails.
And then sk_SCT_push() uses the 'fixture->sct_list' and returns -1 if
fails.
But the return value of the sk_SCT_push() is not checked.
I think it is better to check it just after the allocation.
CLA: trivial
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17571)
The OPENSSL_zalloc() could return NULL pointer if fails.
Add the check for it does make sense, like how digest_test_init() deals
with.
CLA: trivial
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17571)
