Also document that it is ok to use this for control flow decisions.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23304)
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23191)
Signed-off-by: lan1120 <lanming@huawei.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23045)
Even if some configuration entry is incorrect, do not
skip the remaining ones.
Fixes#20789
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/23048)
TLSv1.3 includes an extra byte after the payload for the content type.
We should incorporate that in the calculation of the default buffer length.
Fixes#23015
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23021)
We remove a function that was left behind and is no longer called after the
record layer refactor
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22864)
If an ENGINE has been loaded after the SSL_CTX has been created then
the cipher we have cached might be provider based, but the cipher we
actually end up using might not be. Don't try to set provider params on
a cipher that is actually ENGINE based.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22864)
`tls_parse_ctos_key_share()` didn't properly handle the option.
Avoid the need to deal with the option in multiple places by properly
handling it in `tls_parse_ctos_psk_kex_modes()`.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22844)
We don't need the decoded X.509 Full(0) certificate for the EE usages 1 and 3,
because the leaf certificate is always part of the presented chain, so the
certificate is only validated as well-formed, and then discarded, but the
TLSA record is of course still used after the validation step.
Added DANE test cases for: 3 0 0, 3 1 0, 1 0 0, and 1 1 0
Reported by Claus Assmann.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22821)
Instead of trying to move the doomed sct back
to the src stack, which may fail as well, simply
free the sct object, as the src list will be
deleted anyway.
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22762)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/22828)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/22828)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/22828)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/22828)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/22828)
This may happen when ssl_cert_dup calls custom_exts_copy, where
a possible memory allocation error causes custom_exts_free
to be called twice: once in the error handling of custom_exts_copy
and a second time in the error handling of ssl_cert_dup.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22772)
Several error cases leak either the X509 object
or the pkey or the danetls_record object.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22743)
When we are clearing the sent messages queue we should ensure we free any
old write record layers that are no longer in use. Previously this logic
was in dtls1_hm_fragment_free() - but this can end up freeing the current
record layer under certain error conditions.
Fixes#22664
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22679)
if we allocate a new hm_frament in dtls1_buffer_message with
dtls1_hm_fragment_new, the returned fragment contains uninitalized data in the
msg_header field. If an error then occurs, and we free the fragment,
dtls_hm_fragment_free interrogates the msg_header field (which is garbage), and
potentially references undefined values, or worse, accidentally references
available memory that is not owned, leading to various corruptions.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22679)
If the available space is equal to the tag length then we have no available
space for plaintext data.
Fixes#22699
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22715)
If a single packet contains data from multiple streams we need to keep track
of the cummulative connection level credit consumed across all of the
streams. Once the connection level credit has been consumed we must stop
adding stream data.
Fixes#22706
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22718)
This currently cannot happen without an application overriding
the session with some bogus data so this is an ossl_assert()
check.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22418)
Once we have decided that a stream has an implicit length then we should
treat the packet as full and not try to add any more stream related frames
to the packet.
Fixes#22658
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22662)
The short circuit in the remove function when the element is the last in the
heap, failed to add the removed slot back to the freelist.
Fixes#22644
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22646)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22638)
txp_generate_stream_frames() plans chunks of data to send via the
function txp_plan_stream_chunk(). That function may clamp the amount in
the chunk due to flow control, even though there is more available to send.
We should take this into account when deciding whether or not to try
serializing the next chunk.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22601)
Fixes Coverity 1548383
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22606)
ossl_quic_sstream_is_totally_acked would return 0
if no data had been appended to the stream yet.
Fixed and added tests.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22580)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22585)
The txp->want_ack value has different bit values for different pn_space
values. Make sure we take that into account when we read it.
Fixes#22568
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22579)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22569)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22569)
We calculate the delay from the point that a packet arrives until it will
be counted as lost based on rtt info. Looking at all the packets we can
then calculate the earliest time that a packet will be counted as lost.
When that timer fires the latest rtt info may have changed and therefore
the packet may no longer be counted as lost yet.
We should not assume that just because the ackm timeout has fired that
there will definitely be lost packets.
Fixes#22538
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22541)
While RFC 5705 implies that the maximum length of context for
exporters to be 65535 bytes as the length is embedded in uint16, the
current implementation enforces much smaller limit, which is less than
1024 bytes. This removes the restriction by dynamically allocating
memory.
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22465)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22470)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22470)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22470)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22470)
ACKs are not restricted by CC so do not consider CC when determining
when we will emit an ACK.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22476)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22485)
If a retry occurs we need to reset s->rlayer.wnum so that next time around
we remember how much data we already sent.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22473)
If a URXE cannot be processed yet then we add it to the urx_deferred list.
Later, when they can be processed, we requeue them in the urx_pending list.
We must not reverse the order when doing so. We want to process the URXEs
in the order that they were received.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22452)
We need to call quic_free() to free the record layer to ensure than any
BIO that was already set is also freed.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
When calling qrx_relocate_buffer, both the rxe and the pointer to the token
may be changing locations. We have to use a temporary copy of the token
pointer to avoid referencing the old location of the rxe.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
We ignore such a bad signature when fuzzing - it will never be correct.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
We accept a bad original destination connection id in the transport params
while we are fuzzing since this may change every time.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
Return SSL_SENT_SHUTDOWN and SSL_RECEIVED_SHUTDOWN with semantics
similar to TLS connections.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22408)
The one in ch_rx_handle_packet() is a tuning thing -> QUIC FUTURE
The one in ossl_quic_tserver_shutdown() is a server thing -> QUIC SERVER
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22408)
RFC 9000 s 17.2.5.2 says
> After the client has received and processed an Initial or Retry packet
> from the server, it MUST discard any subsequent Retry packets that it
> receives.
We were checking for multiple Retry packets, but not if we had already
processed an Initial packet.
Fixes the assertion failure noted in
https://github.com/openssl/openssl/pull/22368#issuecomment-1765618884
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22411)
Although many of the QUIC tests use fake time, the time we pass to the
ossl_crypto_condvar_wait_timeout() must be a real time.
Passing fake time was causing the QUIC tserver test to hang because
ossl_crypto_convar_wait_timeout() always timed out immediately and never
relinquished the CPU.
If using fake time we adjust the time to real time just before using it.
Fixes#22020
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22301)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22238)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22174)
An application may pass in a whole BIO chain via SSL_set_bio(). When we
free the BIO we should be using BIO_free_all() not BIO_free() like we do
with TLS.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21979)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21979)
This commit introduces two key improvements:
1. Improve code safety by replacing the conditional statement with
`if (n >= size)` and using OPENSSL_strnlen() instead of strlen().
This change ensures proper buffer size handling and adheres to
secure coding practices.
2. Enhance code readability by substituting `strcpy(p, c->name)` with
`memcpy(p, c->name, n)`. This adjustment prioritizes code clarity and
maintenance, even while mitigating a minimal buffer overflow risk.
These enhancements bolster the code's robustness and comprehensibility,
aligning with secure coding principles and best practices.
Fixes#19837
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21934)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22098)
TLS misconfiguration errors should be shown to the application to enable
diagnosis of the problem. Otherwise you just get a generical "internal
error" message.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22066)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22063)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22011)
Check that we can set and use a PSK when establishing a QUIC connection.
Fixesopenssl/project#83
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22011)
Found by running the checkpatch.pl Linux script to enforce coding style.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21468)
Found by running the checkpatch.pl Linux script to enforce coding style.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21468)
It's needed for platforms that don't define UINT64_MAX and similar macros
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21951)
Update commit messages that previously used ssl3_get_message()
to now use tls_get_message_header() and tls_get_message_body()
due to the split in OpenSSL 1.1.0.
CLA: trivial
Fixes#21582
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21886)
SSL_get_error() may respond with some retry errors that are not IO related.
In particular SSL_ERROR_WANT_RETRY_VERIFY and SSL_ERROR_WANT_X509_LOOKUP.
These can occur during a TLS handshake. If they occur when a QUIC Connection
is performing a TLS handshake then we need to propagate these up to the QCSO.
We also handle SSL_ERROR_WANT_CLIENT_HELLO_CB. This one will only ever
occur on the server side which we don't currently support. However adding
the handling for it now is identical to all the other handling so including
it is no cost, and will be needed when we do add server support.
We are not concerned with SSL_ERROR_WANT_ASYNC or SSL_ERROR_WANT_ASYNC_JOB
since we do not support async operation with QUIC.
Fixesopenssl/project#199
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21922)
They produce a warning `suggest braces around initialization of subobject`
otherwise.
Add -Wno-missing-braces to silence old clang compilers
And drop unnecessary braces in zeroing initializers.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21823)
The TLS record type is a single byte value so we can
use uint8_t for it. This allows passing its address
directly to SSL_trace() instead of converting it to
a single byte type first.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21823)
If we want to send a CONNECTION_CLOSE frame then one is enough unless we
are scheduled to send another one. Now that we can create more than one
datagram in one go this is now required.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21798)
If we've got more data to send than will fit in a single datagram we should
keep generating those datagrams until we've sent it all.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21798)
This is useful for debugging purposes. The standard SSL_trace msgcallback
can be used with tserver.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21800)
We change the client TLS handshake keys as late as possible so that we
don't disturb the keys if we are writing early data. However for QUIC we
want to do this as early as possible (after ServerHello). Since we will
never do TLS early data with QUIC we just do it as early as possible if
early data is not being used.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21810)
Even in case of later failure we need to flush
the previous packets.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21700)
Raise errors when appropriate.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21700)
This improves tracking where the failure was triggered.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21700)
RFC says that successful decryption of HANDSHAKE el packet
triggers the discard on server side only.
On client we discard INITIAL el when we successfully send
a HANDSHAKE packet.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21713)
In some cases where a FIN has been received but with no data quic_read_actual
was failing to raise SSL_ERROR_ZERO_RETURN. This meant that we could end up
blocking in SSL_read(_ex) for too long.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21780)
If setting the crypto state has failed then memory might have been
partially allocated to fields within the partially constructed record
layer. We need to call tls_int_free() to properly free it.
Found by the reproducible error patch in openssl#21668
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21753)
We shouldn't free the prev BIO in ssl_set_new_record_layer until it is
no longer referenced by s->rlayer.rrlnext.
Found by the reproducible error patch in #21668
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21741)
The comments in quic_tls.c claimed that the dummybio was never used by
us. In fact that is not entirely correct since we set and cleared the
retry flags on it. This means that we have to manage it properly, and update
it in the event of set1_bio() call on the record layer method.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21686)
This should result in a QUIC PROTOCOL_VIOLATION
We also add tests for a post-handshake KeyUpdate, and a NewSessionTicket
with an invalid max_early_data value.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21686)
We already disallowed the sending of TLS KeyUpdate messages. We also treat
the receipt of a TLS KeyUpdate message as an unexpected message.
RFC 9001 section 6:
Endpoints MUST treat the receipt of a TLS KeyUpdate message as a connection
error of type 0x010a, equivalent to a fatal TLS alert of unexpected_message;
see Section 4.8.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21686)
The max_early_data value must be 0xffffffff if the extension is present in
a NewSessionTicket message in QUIC. Otherwise it is a PROTOCOL_VIOLATION.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21686)
We should retain the TLS1_FLAGS_QUIC setting in in s3.flags even after a
"clear" operation.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21686)
An OpenSSL QUIC client does not send the post_handshake_auth extension.
Therefore if a server sends a post-handsahke CertificateRequest then this
would be treated as a TLS protocol violation with an "unexpected message"
alert code. However RFC 9001 specifically requires us to treat this as
QUIC PROTOCOL_VIOLATION. So we have to translate the "unexpected message"
alert code in this one instance.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21686)
For some of the items we add FUTURE/SERVER/TESTING/MULTIPATH
designation to indicate these do not need to be resolved
in QUIC MVP release.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21539)
