In some error cases the normal cleanup did not
happen, but instead an exit(1) which caused some
memory leaks, as reported in #22049.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/22055)
Mostly revamped from #16712
- fall thru -> fall through
- time stamp -> timestamp
- host name -> hostname
- ipv6 -> IPv6
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19059)
The -provider and -propquery options did not work on dhparam. Fix this
and add tests that check that operations that would usually fail with
the FIPS provider work when run with
| -provider default -propquery '?fips!=yes'
See also 30b2c3592e, which previously
fixed the same problem in dsaparam and gendsa. See also the initial
report in https://bugzilla.redhat.com/show_bug.cgi?id=2094956.
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/18717)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/18424)
Allow dhparam to run quietly in scripts, etc.
For other commands that took a -verbose flag already, also support -quiet.
For genpkey which only supported -quiet, add the -verbose flag.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17336)
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17359)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17030)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16783)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16783)
This also introduces app_keygen() and app_paramgen() and cleans up err reporting.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12095)
Additional renames done in encoder and decoder implementation
to follow the style.
Fixes#13622
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14155)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14135)
The existing names such as EVP_PKEY_param_fromdata_settable were a bit
confusing since the 'param' referred to key params not OSSL_PARAM. To simplify
the interface a 'selection' parameter will be passed instead. The
changes are:
(1) EVP_PKEY_fromdata_init() replaces both EVP_PKEY_key_fromdata_init() and EVP_PKEY_param_fromdata_init().
(2) EVP_PKEY_fromdata() has an additional selection parameter.
(3) EVP_PKEY_fromdata_settable() replaces EVP_PKEY_key_fromdata_settable() and EVP_PKEY_param_fromdata_settable().
EVP_PKEY_fromdata_settable() also uses a selection parameter.
Fixes#12989
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14076)
Make sure all commands check to see if there are any "extra" arguments
after the options, and print an error if so.
Made all error messages consistent (which is to say, minimal).
Fixes: #13527
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13563)
Skip tests that require DSA to be available. While we're doing this
we also remove an OPENSSL_NO_DSA guard in the dhparam app that is no
longer necessary (even though DSA may not be present in our own providers
it could be available via a third party provider).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13599)
The -dsaparam option was deprecated because it was previously using
deprecated functions in order to operate. This is no longer the case
and therefore does not need to be deprecated.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13485)
Previously changes left some variables behind that were no longer needed.
We now remove them.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13231)
'dhparam' can't be completely rewritten in terms of EVP_PKEY functions
yet, because we lack X9.42 support. However, we do when generating,
but forgot to extract a DH pointer with EVP_PKEY_get0_DH().
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/12048)
Rather than wrapping whole files in "ifndef OPENSSL_NO_xxx" we handle
the changes in build.info
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/11250)
Add a -provider option to allow providers to be loaded. This option can be
specified multiple times.
Add a -provider_path option to allow the path to providers to be specified.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11167)
This also means that there doesn't need to be any conditional checks in the .c
files to avoid deprecated builds.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11067)
speed is updated to not support DSA instead of being removed.
The dhparam, dsaparam, dsa and gendsa commands are deprecated but still
exist without NO_DEPRECATED defined.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10977)
Add documentation for all commands that have parameters.
Fix a couple of minor doc and programming bugs, too.
Fixes#10313
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10371)
Remove "Valid options" label, since all commands have sections (and
[almost] always the first one is "General options").
Have "list --options" ignore section headers
Reformat ts's additional help
Add output section
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9953)
This avoids leaking bit 0 of the private key.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/9363)
into an existing source file: the function is static, and the code
doesn't include dsa.h. Match the generated C source style of dsaparam.
Adjust apps/dhparam.c to match, and rename the BIGNUMs to their more
usual single-letter names. Add an error return in the generated C source.
both: simplify the callback function
Signed-off-by: Beat Bolli <dev@drbeat.li>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6797)
For 'openssl dhparams', the output file was opened after calculations
were made, which is a waste of cycles and time if the output file
turns out not to be writable.
Fixes#3404
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6051)
Everything in apps includes apps.h, because that one declares apps
internal library routines. However, progs.h doesn't declare library
routines, but rather the main commands and their options, and there's
no reason why the library modules should include it.
So, remove the inclusion of progs.h from apps.h and add that inclusion
in all command source files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5222)
