It seems more intuitive to set `OPENSSL_TRACE=all` instead of
`OPENSSL_TRACE=any` to obtain trace output for all categories.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8552)
Previously, if the openssl application was run with OPENSSL_TRACE=any,
all trace output would just show 'ANY' as the category name, which was
not very useful. To get the correct category name printed in the trace
output, the openssl application now registers separate channels for
each category.
The trace API is unchanged, it is still possible for an application to
register a single channel for the 'ANY' category to see all outputt,
if it does not need this level of detail.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8552)
Partially reverts d33d76168f Don't fail when tracing is disabled
Commit d33d76168f fixed the problem that the initialization of
libcrypto failed when tracing was disabled, because the unoperational
ossl_trace_init() function returned a failure code. The problem was
fixed by changing its return value from failure to success.
As part of the fix the return values of other unimplemented trace API
functions (like OSSL_trace_set_channel(),OSSL_trace_set_callback())
was changed from failure to success, too. This change was not necessary
and is a bit problematic IMHO, because nobody expects an unimplemented
function to pretend it succeeded.
It's the application's duty to handle the case correctly when the trace
API is not enabled (i.e., OPENSSL_NO_TRACE is defined), not the API's job
to pretend success just to prevent the application from failing.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8552)
It is important that output to the trace channels occurs only inside
a trace group. This precondtion is satisfied whenever the standard
TRACE macros are used. It can be violated only by a bad programming
mistake, like copying the 'trc_out' pointer and using it outside
the trace group.
This commit enforces correct pairing of the OSSL_TRACE_CTRL_BEGIN and
OSSL_TRACE_CTRL_END callbacks, and checks that OSSL_TRACE_CTRL_WRITE
callbacks only occur within such groups.
While implementing it, it turned out that the group assertion failed
apps/openssl.c:152: OpenSSL internal error: \
Assertion failed: trace_data->ingroup
because the set_trace_data() function invokes some callbacks which
generate trace output, but the correct channel type was set only
after the set_trace_data() call.
To fix the failed assertions, the correct channel type is now set
inside the set_trace_data() call, instead of doing it afterwards.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8463)
The openssl app registers trace callbacks which automatically
set a line prefix in the OSSL_TRACE_CTRL_BEGIN callback.
This prefix needs to be cleared in the OSSL_TRACE_CTRL_END
callback, otherwise a memory leak is reported when openssl
is built with crypto-mdebug enabled.
This leak causes the tests to fail when tracing and memory
debugging are enabled.
The leak can be observed by any command that produces trace
output, e.g. by
OPENSSL_TRACE=ANY util/shlib_wrap.sh apps/openssl version
...
[00:19:14] 4061 file=apps/bf_prefix.c, line=152, ...
26 bytes leaked in 1 chunks
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8463)
All other instances are OPENSSL_NO_ENGINE without the trailing "S".
Fixes build when configured with no-engine.
CLA: trivial
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8449)
The trace API doesn't know that the BIOs we give it, let alone those
we attach to callbacks as 'void *data', need to be cleaned up. This
must be done in the application.
To ensure this cleanup is done as late as possible, use atexit().
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)
Use the environment variables OPENSSL_TRACE to determine what's going
to be enabled. The value of this variables is a comma separated list
of trace and debugging names, which correspond to the trace category
macros defined in include/openssl/trace.h.
For example, setting OPENSSL_DEBUG=TRACE,SSL will enable debugging output
for the types OSSL_TRACE_CATEGORY_TRACE and OSSL_TRACE_CATEGORY_SSL.
This also slightly changes the handling of the prefix method in
apps/apps.c. This is for the better, as the prefix method pointer was
unneccessarily stored in two places.
Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)
When compiling with -Wall on a machine with an old compiler it gives a false
positive that the dc variable which is a structure of type DISPLAY_COLUMNS
could be used uninitialised. In fact the dc variable's members will always get
set in the case it is used, otherwise it is left uninitialised.
This fix just causes the dc variable's members to always get initialised to 0
at declaration, so the false positive will not get flagged.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5337)
The reason to do this is that some output might start with an 'ok',
which TAP catches and takes for TAP output. The TAP compatible way is
to make all output it shouldn't catch look like comments.
We do this by setting the environment variable HARNESS_OSSL_PREFIX
during tests. When that is set, apps/openssl uses BIO_f_linebuffer
and sets its prefix to the content of that environment variable.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5224)
Everything in apps includes apps.h, because that one declares apps
internal library routines. However, progs.h doesn't declare library
routines, but rather the main commands and their options, and there's
no reason why the library modules should include it.
So, remove the inclusion of progs.h from apps.h and add that inclusion
in all command source files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5222)
Otherwise, any command that relies on ssl modules may fail, because
SSL_add_ssl_module() will be called after the config file has already
been loaded.
Fixes#4788
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4792)
The Chinese cryptographic operations should appear in the disabled list if they
are disabled.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4678)
Since return is inconsistent, I removed unnecessary parentheses and
unified them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4541)
Remove GETPID_IS_MEANINGLESS and osslargused.
Move socket-related things to new file internal/sockets.h; this is now
only needed by four(!!!) files. Compiles should be a bit faster.
Remove USE_SOCKETS ifdef's
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4209)
Remove the exit_main function which is never used.
Remove the exit_options array which is also unreferenced.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4213)
Write missing prime.pod and srp.pod
Implement -c in find-doc-nits (for command options)
Other fixes to some manpages
Use B<-I<digest|cipher>> notation
Split up multiple flags into a single entry in the synopsis.
Add -1 and missing-help to list command.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4144)
Standardized the -rand flag and added a new one:
-rand file...
Always reads the specified files
-writerand file
Always writes to the file on exit
For apps that use a config file, the RANDFILE config parameter reads
the file at startup (to seed the RNG) and write to it on exit if
the -writerand flag isn't used.
Ensured that every app that took -rand also took -writerand, and
made sure all of that agreed with all the documentation.
Fix error reporting in write_file and -rand
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3862)
Instead, make it possible to disable the console reader that's part of
the UI module. This makes it possible to use the UI API and other UI
methods in environments where the console reader isn't useful.
To disable the console reader, configure with 'no-ui-console' /
'disable-ui-console'.
'no-ui' / 'disable-ui' is now an alias for 'no-ui-console' /
'disable-ui-console'.
Fixes#3806
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3820)
Mostly braces and NULL pointer check and also copyright year bump
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3657)
This removes the fips configure option. This option is broken as the
required FIPS code is not available.
FIPS_mode() and FIPS_mode_set() are retained for compatibility, but
FIPS_mode() always returns 0, and FIPS_mode_set() can only be used to
turn FIPS mode off.
Reviewed-by: Stephen Henson <steve@openssl.org>
This implementation is written in endian agnostic C code. No attempt
at providing machine specific assembly code has been made. This
implementation expands the evptests by including the test cases from
RFC 5794 and ARIA official site rather than providing an individual
test case. Support for ARIA has been integrated into the command line
applications, but not TLS. Implemented modes are CBC, CFB1, CFB8,
CFB128, CTR, ECB and OFB128.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2337)
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1694)
Windows never composes UTF-8 strings as result of user interaction
such as passing command-line argument. The only way to compose one
is programmatic conversion from WCHAR string, which in turn can be
picked up on command line.
[For reference, why not wmain, it's not an option on MinGW.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
