pthread_cancel() is never called by OpenSSL. Therefore this is no point in
setting the cancel state/type. The functions to set the cancel state/type
are not supported on Android and result in compilation failures. Therefore
we remove these calls completely.
Fixes#19559
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19779)
This PR is based off the contributions in PR #9223 by Jemmy1228.
It has been modified and reworked to:
(1) Work with providers
(2) Support ECDSA and DSA
(3) Add a KDF HMAC_DRBG implementation that shares code with the RAND HMAC_DRBG.
A nonce_type is passed around inside the Signing API's, in order to support any
future deterministic algorithms.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18809)
ftmp4 is assigned immediately before receiving the reduced output of the
multiplication of ftmp and ftmp3, without being read inbetween these
assignments. Remove redundant assignment.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19766)
Signed-off-by: Xu Yizhou <xuyizhou1@huawei.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19619)
Add the following OID:
SM4-XTS: 1.2.156.10197.1.104.10
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19619)
Originally the code to im/export the EC pubkey was meant to be consumed
only by the im/export functions when crossing the provider boundary.
Having our providers exporting to a COMPRESSED format octet string made
sense to avoid memory waste, as it wasn't exposed outside the provider
API, and providers had all tools available to convert across the three
formats.
Later on, with #13139 deprecating the `EC_KEY_*` functions, more state
was added among the params imported/exported on an EC provider-native
key (including `OSSL_PKEY_PARAM_EC_POINT_CONVERSION_FORMAT`, although it
did not affect the format used to export `OSSL_PKEY_PARAM_PUB_KEY`).
Finally, in #14800, `EVP_PKEY_todata()` was introduced and prominently
exposed directly to users outside the provider API, and the choice of
COMPRESSED over UNCOMPRESSED as the default became less sensible in
light of usability, given the latter is more often needed by
applications and protocols.
This commit fixes it, by using `EC_KEY_get_conv_form()` to get the
point format from the internal state (an `EC_KEY` under the hood) of the
provider-side object, and using it on
`EVP_PKEY_export()`/`EVP_PKEY_todata()` to format
`OSSL_PKEY_PARAM_PUB_KEY`.
The default for an `EC_KEY` was already UNCOMPRESSED, and it is altered
if the user sets `OSSL_PKEY_PARAM_EC_POINT_CONVERSION_FORMAT` via
`EVP_PKEY_fromdata()`, `EVP_PKEY_set_params()`, or one of the
more specialized methods.
For symmetry, this commit also alters `ec_pkey_export_to()` in
`crypto/ec/ec_ameth.c`, part of the `EVP_PKEY_ASN1_METHOD` for legacy EC
keys: it exclusively used COMPRESSED format, and now it honors the
conversion format specified in the EC_KEY object being exported to a
provider when this function is called.
Expand documentation about `OSSL_PKEY_PARAM_PUB_KEY` and mention the
3.1 change in behavior for our providers.
Fixes#16595
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19681)
(cherry picked from commit 926db476bc)
CID 1517043 and 1517038: (Forward NULL) - Removed redundant check that is already
done by the caller. It was complaining that it checked for ctlen == NULL
and then did a goto that used this *ctlen.
CID 1517042 and 1517041: (Forward NULL) - Similar to above for ptlen in
hpke_aead_dec()
CID 1517040: Remove unneeded logging. This gets rid of the warning
related to taking the sizeof(&)
CID 1517039: Check returned value of RAND_bytes_ex() in hpke_test
CID 1517038: Check return result of KEM_INFO_find() in
OSSL_HPKE_get_recomended_ikmelen. Even though this is a false positive,
it should not rely on the internals of other function calls.
Changed some goto's into returns to match OpenSSL coding guidelines.
Removed Raises from calls to _new which fail from malloc calls.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19774)
Fixes#18631
The store lock does not prevent concurrent access to the
property cache, because there are multiple stores.
We drop the newly created entry and use the exisiting one
if there is one already.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19762)
Comments in felem_inv refer to the logarithm with respect to in of the
element that has just been computed. The last two such annotations are
incorrect. By Fermat's last theorem, we hope to compute in^(p-2) in
GF(2^521-1), as such we expect the final index we reach to be 2^521-3.
CLA: Trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19765)
This supports all the modes, suites and export mechanisms defined
in RFC9180 and should be relatively easily extensible if/as new
suites are added. The APIs are based on the pseudo-code from the
RFC, e.g. OSS_HPKE_encap() roughly maps to SetupBaseS(). External
APIs are defined in include/openssl/hpke.h and documented in
doc/man3/OSSL_HPKE_CTX_new.pod. Tests (test/hpke_test.c) include
verifying a number of the test vectors from the RFC as well as
round-tripping for all the modes and suites. We have demonstrated
interoperability with other HPKE implementations via a fork [1]
that implements TLS Encrypted ClientHello (ECH) which uses HPKE.
@slontis provided huge help in getting this done and this makes
extensive use of the KEM handling code from his PR#19068.
[1] https://github.com/sftcd/openssl/tree/ECH-draft-13c
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17172)
Fixes#19498
However the private key part is not optional which was
mishandled by the legacy routine.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19505)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19216)
Otherwise, further OSSL_CMP_exec_GENM_ses() calls will go wrong.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19216)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19216)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19222)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19222)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19222)
There is no reason preventing this API to support SM2,
which gives us a simple method to do SM2 key gen.
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19736)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19205)
On this occasion, replace magic constants by mnemonic ones; update doc
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19205)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19230)
TLS device offload allows to perform zerocopy sendfile transmissions.
FreeBSD provides this feature by default, and Linux 5.19 introduced it
as an opt-in. Zerocopy improves the TX rate significantly, but has a
side effect: if the underlying file is changed while being transmitted,
and a TCP retransmission happens, the receiver may get a TLS record
containing both new and old data, which leads to an authentication
failure and termination of connection. This effect is the reason Linux
makes a copy on sendfile by default.
This commit adds support for TLS zerocopy sendfile on Linux disabled by
default to avoid any unlikely backward compatibility issues on Linux,
although sacrificing consistency in OpenSSL's behavior on Linux and
FreeBSD. A new option called KTLSTxZerocopySendfile is added to enable
the new zerocopy behavior on Linux. This option should be used when the
the application guarantees that the file is not modified during
transmission, or it doesn't care about breaking the connection.
The related documentation is also added in this commit. The unit test
added doesn't test the actual functionality (it would require specific
hardware and a non-local peer), but solely checks that it's possible to
set the new option flag.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18650)
an assembler for Windows on Arm builds and also clang-cl as the compiler
as well. Make appropriate changes to armcap source and peralsm scripts.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19523)
And so clean a few useless includes
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19721)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19715)
Reduce the Miller Rabin counts to the values specified by FIPS 186-5.
The old code was using a fixed value of 64.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19579)
FIPS 186-4 has 5 different algorithms for key generation,
and all of them rely on testing GCD(a,n) == 1 many times.
Cachegrind was showing that during a RSA keygen operation,
the function BN_gcd() was taking a considerable percentage
of the total cycles.
The default provider uses multiprime keygen, which seemed to
be much faster. This is because it uses BN_mod_inverse()
instead.
For a 4096 bit key, the entropy of a key that was taking a
long time to generate was recorded and fed back into subsequent
runs. Roughly 40% of the cycle time was BN_gcd() with most of the
remainder in the prime testing. Changing to use the inverse
resulted in the cycle count being 96% in the prime testing.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19578)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19656)
The values don't match those in include/openssl/sslerr.h
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19688)
EVP_PKEY_eq() is used to check, among other things, if a certificate
public key corresponds to a private key. When the private key belongs to
a provider that does not allow to export private keys this currently
fails as the internal functions used to import/export keys ignored the
selection given (which specifies that only the public key needs to be
considered) and instead tries to export everything.
This patch allows to propagate the selection all the way down including
adding it in the cache so that a following operation actually looking
for other selection parameters does not mistakenly pick up an export
containing only partial information.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19648)
I chose to just hide this behind '#ifndef __DJGPP__', instead of listing
all the macro combinations where it *is* used. That would make quite a
mess.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19322)
This matches the declaration in <openssl/crypto.h>.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19322)
This causes a warning otherwise when socklen_t is signed (Watt32).
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19322)
For some reason djgpp uses '(unsigned) long int' for (u)int32_t. This
causes errors with -Werror=format, even though these types are in
practice identical.
Obvious solution: cast to the types indicated by the format string.
For asn1_time_test.c I changed the format string to %lli since time_t
may be 'long long' some platforms.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19322)
Add test for `.' overflows, remove the output size argument from
ossl_a2ulabel() since it was never used and greatly complicated the code.
Convert ossl_a2ulabel() to use WPACKET for building the output string.
Update the documentation to match the new definition of ossl_a2ulabel().
x509: let punycode handle the '\0' string termination. Saves a memset(3)
and some size fiddling. Also update to deal with the modified parameters.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19591)
Make the code more robust and correctly handle EVP_PKEY set to NULL
instead of dereferencing null pointer.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19536)
The copy of PKEY should be released on the error path.
Easily reproduced with "ED448" context.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19536)
Otherwise the powerbufLen can overflow.
Issue reported by Jiayi Lin.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19632)
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19608)
The use case is that uppercase .ASM extension may be used on some platforms,
and we were only testing for the lowercase extension.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19604)
These functions pass a library content and prop query.
The i2d documentation related to these functions has been corrected since the bio and fp functions always return 0 or 1.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18427)
