Add -client_renegotiation flag support. The -client_renegotiation flag is
equivalent to SSL_OP_ALLOW_CLIENT_RENEGOTIATION. Add support to the app,
the config code, and the documentation.
Add SSL_OP_ALLOW_CLIENT_RENEGOTIATION to the SSL tests. We don't need to
always enable it, but there are so many tests so this is the easiest thing
to do.
Add a test where client tries to renegotiate and it fails as expected. Add
a test where server tries to renegotiate and it succeeds. The second test
is supported by a new flag, -immediate_renegotiation, which is ignored on
the client.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15184)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15230)
Less tersely: converted SSL_get_options, SSL_set_options,
SSL_CTX_get_options and SSL_CTX_get_options to take and return uint64_t
since we were running out of 32 bits.
Fixes: 15145
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15230)
This option is only useful for the client, but it was previously
marked as only being applicable for servers.
Correct the entry to properly mark it as client-only, and update the
s_server/s_client manuals accordingly.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15127)
It has always been the case that KTLS is not compiled by default. However
if it is compiled then it was automatically used unless specifically
configured not to. This is problematic because it avoids any crypto
implementations from providers. A user who configures all crypto to use
the FIPS provider may unexpectedly find that TLS related crypto is actually
being performed outside of the FIPS boundary.
Instead we change KTLS so that it is disabled by default.
We also swap to using a single "option" (i.e. SSL_OP_ENABLE_KTLS) rather
than two separate "modes", (i.e. SSL_MODE_NO_KTLS_RX and
SSL_MODE_NO_KTLS_TX).
Fixes#13794
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14799)
Additional renames done in encoder and decoder implementation
to follow the style.
Fixes#13622
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14155)
By recognising the nist group names directly we can avoid having to call
EC_curve_nist2nid in libssl, which is not available in a no-ec build.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
The old function took a DH as a parameter. In the new version we pass
an EVP_PKEY instead. Similarly for the SSL_CTX version of this function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
This option calls SSL_set_tmp_dh() which does not exist in a no-deprecated
build. We need to implement an alternative.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
Since SSLfatal() doesn't take a function code any more, we drop that
argument everywhere. Also, we convert all combinations of SSLfatal()
and ERR_add_data() to an SSLfatal_data() call.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13316)
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
Automatically rename all instances of _with_libctx() to _ex() as per
our coding style.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12970)
- In order to not add many X509_XXXX_with_libctx() functions the libctx and propq may be stored in the X509 object via a call to X509_new_with_libctx().
- Loading via PEM_read_bio_X509() or d2i_X509() should pass in a created cert using X509_new_with_libctx().
- Renamed some XXXX_ex() to XXX_with_libctx() for X509 API's.
- Removed the extra parameters in check_purpose..
- X509_digest() has been modified so that it expects a const EVP_MD object() and then internally it does the fetch when it needs to (via ASN1_item_digest_with_libctx()).
- Added API's that set the libctx when they load such as X509_STORE_new_with_libctx() so that the cert chains can be verified.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12153)
The 'MinProtocol' and 'MaxProtocol' configuration commands now silently
ignore TLS protocol version bounds when configurign DTLS-based contexts,
and conversely, silently ignore DTLS protocol version bounds when
configuring TLS-based contexts. The commands can be repeated to set
bounds of both types. The same applies with the corresponding
"min_protocol" and "max_protocol" command-line switches, in case some
application uses both TLS and DTLS.
SSL_CTX instances that are created for a fixed protocol version (e.g.
TLSv1_server_method()) also silently ignore version bounds. Previously
attempts to apply bounds to these protocol versions would result in an
error. Now only the "version-flexible" SSL_CTX instances are subject to
limits in configuration files in command-line options.
Expected to resolve#12394
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #12472
... and only *define* them in the source files that need them.
Use DEFINE_OR_DECLARE which is set appropriately for internal builds
and not non-deprecated builds.
Deprecate stack-of-block
Better documentation
Move some ASN1 struct typedefs to types.h
Update ParseC to handle this. Most of all, ParseC needed to be more
consistent. The handlers are "recursive", in so far that they are called
again and again until they terminate, which depends entirely on what the
"massager" returns. There's a comment at the beginning of ParseC that
explains how that works. {Richard Levtte}
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10669)
This is a wrapper around OSSL_STORE.
This also adds necessary support functions:
- X509_STORE_load_file
- X509_STORE_load_path
- X509_STORE_load_store
- SSL_add_store_cert_subjects_to_stack
- SSL_CTX_set_default_verify_store
- SSL_CTX_load_verify_file
- SSL_CTX_load_verify_dir
- SSL_CTX_load_verify_store
and deprecates X509_STORE_load_locations and SSL_CTX_load_verify_locations,
as they aren't extensible.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8442)
Also added blanks lines after declarations in a couple of places.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9916)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
Add SSL_OP64_NO_EXTENDED_MASTER_SECRET, that can be set on either
an SSL or an SSL_CTX. When processing a ClientHello, if this flag
is set, do not indicate that the EMS TLS extension was received in
either the ssl3 object or the SSL_SESSION. Retain most of the
sanity checks between the previous and current session during
session resumption, but weaken the check when the current SSL
object is configured to not use EMS.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3910)
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7738)
This also adds the ability to control this through s_server
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6469)
Also allows the apps to set it.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5227)
In 1.0.2 you could configure automatic ecdh params by using the
ECDHParameters config directive and setting it to the value
"+Automatic" or just "Automatic". This is no longer required in 1.1.0+
but we still recognise the "+Automatic" keyword for backwards compatibility.
However we did not recognise just "Automatic" without the leading "+" which
is equally valid. This commit fixes that omission.
Fixes#4113
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6035)
With the current mechanism, old cipher strings that used to work in 1.1.0,
may inadvertently disable all TLSv1.3 ciphersuites causing connections to
fail. This is confusing for users.
In reality TLSv1.3 are quite different to older ciphers. They are much
simpler and there are only a small number of them so, arguably, they don't
need the same level of control that the older ciphers have.
This change splits the configuration of TLSv1.3 ciphers from older ones.
By default the TLSv1.3 ciphers are on, so you cannot inadvertently disable
them through your existing config.
Fixes#5359
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5392)
Add SSL_verify_client_post_handshake() for servers to initiate PHA
Add SSL_force_post_handshake_auth() for clients that don't have certificates
initially configured, but use a certificate callback.
Update SSL_CTX_set_verify()/SSL_set_verify() mode:
* Add SSL_VERIFY_POST_HANDSHAKE to postpone client authentication until after
the initial handshake.
* Update SSL_VERIFY_CLIENT_ONCE now only sends out one CertRequest regardless
of when the certificate authentication takes place; either initial handshake,
re-negotiation, or post-handshake authentication.
Add 'RequestPostHandshake' and 'RequirePostHandshake' SSL_CONF options that
add the SSL_VERIFY_POST_HANDSHAKE to the 'Request' and 'Require' options
Add support to s_client:
* Enabled automatically when cert is configured
* Can be forced enabled via -force_pha
Add support to s_server:
* Use 'c' to invoke PHA in s_server
* Remove some dead code
Update documentation
Update unit tests:
* Illegal use of PHA extension
* TLSv1.3 certificate tests
DTLS and TLS behave ever-so-slightly differently. So, when DTLS1.3 is
implemented, it's PHA support state machine may need to be different.
Add a TODO and a #error
Update handshake context to deal with PHA.
The handshake context for TLSv1.3 post-handshake auth is up through the
ClientFinish message, plus the CertificateRequest message. Subsequent
Certificate, CertificateVerify, and Finish messages are based on this
handshake context (not the Certificate message per se, but it's included
after the hash). KeyUpdate, NewSessionTicket, and prior Certificate
Request messages are not included in post-handshake authentication.
After the ClientFinished message is processed, save off the digest state
for future post-handshake authentication. When post-handshake auth occurs,
copy over the saved handshake context into the "main" handshake digest.
This effectively discards the any KeyUpdate or NewSessionTicket messages
and any prior post-handshake authentication.
This, of course, assumes that the ID-22 did not mean to include any
previous post-handshake authentication into the new handshake transcript.
This is implied by section 4.4.1 that lists messages only up to the
first ClientFinished.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4964)
IFF the client has ChaCha first, and server cipher priority is used,
and the new SSL_OP_PRIORITIZE_CHACHA_FOR_MOBILE option is used,
then reprioritize ChaCha above everything else. This way, A matching
ChaCha cipher will be selected if there is a match. If no ChaCha ciphers
match, then the other ciphers are used.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4436)
Removed e_os.h from all bar three headers (apps/apps.h crypto/bio/bio_lcl.h and
ssl/ssl_locl.h).
Added e_os.h into the files that need it now.
Directly reference internal/nelem.h when required.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
Add padding callback for application control
Standard block_size callback
Documentation and tests included
Configuration file/s_client/s_srver option
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3130)
Verify that the encrypt-then-mac negotiation is handled
correctly. Additionally, when compiled with no-asm, this test ensures
coverage for the constant-time MAC copying code in
ssl3_cbc_copy_mac. The proxy-based CBC padding test covers that as
well but it's nevertheless better to have an explicit handshake test
for mac-then-encrypt.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This is a skin deep change, which simply renames most places where we talk
about curves in a TLS context to groups. This is because TLS1.3 has renamed
the extension, and it can now include DH groups too. We still only support
curves, but this rename should pave the way for a future extension for DH
groups.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Includes addition of the various options to s_server/s_client. Also adds
one of the new TLS1.3 ciphersuites.
This isn't "real" TLS1.3!! It's identical to TLS1.2 apart from the protocol
and the ciphersuite...and the ciphersuite is just a renamed TLS1.2 one (not
a "real" TLS1.3 ciphersuite).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Run util/openssl-format-source on ssl/
Some comments and hand-formatted tables were fixed up
manually by disabling auto-formatting.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Currently, SSL tests are configured via command-line switches to
ssltest.c. This results in a lot of duplication between ssltest.c and
apps, and a complex setup. ssltest.c is also simply old and needs
maintenance.
Instead, we already have a way to configure SSL servers and clients, so
we leverage that. SSL tests can now be configured from a configuration
file. Test servers and clients are configured using the standard
ssl_conf module. Additional test settings are configured via a test
configuration.
Moreover, since the CONF language involves unnecessary boilerplate, the
test conf itself is generated from a shorter Perl syntax.
The generated testcase files are checked in to the repo to make
it easier to verify that the intended test cases are in fact run; and to
simplify debugging failures.
To demonstrate the approach, min/max protocol tests are converted to the
new format. This change also fixes MinProtocol and MaxProtocol
handling. It was previously requested that an SSL_CTX have both the
server and client flags set for these commands; this clearly can never work.
Guide to this PR:
- test/ssl_test.c - test framework
- test/ssl_test_ctx.* - test configuration structure
- test/handshake_helper.* - new SSL test handshaking code
- test/ssl-tests/ - test configurations
- test/generate_ssl_tests.pl - script for generating CONF-style test
configurations from perl inputs
Reviewed-by: Richard Levitte <levitte@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
