-path is non-portable extension, fortunately it's possible to express
.git subdirectory exclusion with -prune.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7004)
This allows the original path to be displayed when it's shown
to be invalid, so the user can relate without question.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6925)
Extra slashes in paths are permissible in Unix-like platforms...
however, when compared with the result from 'which', which returns
canonical paths, the comparison might fail even though the compared
paths may be equivalent. We make the NDK path canonical internally to
ensure the equivalence compares as equal, at least for the most
trivial cases.
Fixes#6917
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6924)
On the same note, change the 'NASM not found' message to give specific
advice on how to handle the failure.
Fixes#6765
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6771)
The result is that we don't have to produce different names on
different platforms, and we won't have confusion on Windows depending
on if the script was built with mingw or with MSVC.
Partial fix for #3254
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6764)
To avoid the possibility that someone creates rem.exe, rem.bat or
rem.cmd, simply don't use it. In the cases it was used, it was to
avoid empty lines, but it turns out that nmake handles those fine, so
no harm done.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6686)
It seems that nmake first tries to run executables on its own, and
only pass commands to cmd if that fails. That means it's possible to
have nmake run something like 'echo.exe' when the builtin 'echo'
command was expected, which might give us unexpected results.
To get around this, we create our own echoing script and call it
explicitly from the nmake makefile.
Fixes#6670
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6686)
OpenSSL 1.1.0 supports the use of this environment variable for
passing to the build files. For the sake of backward compatibility,
we keep it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6668)
This makes AIX build procedure behave more like e.g. Solaris. Most
notably this makes it possible to pass -Wl,-R,'$(LIBRPATH)' at config
time to embed installation destination as library search path into
openssl binary. This doesn't imply that other applications have to be
linked with -bsvr4, they are free to choose whatever appropriate for
given circumstances.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6487)
AIX treats its shared libraries in unique manner, by placing multiple
shared objects of different versions and bitnesses, into .a file.
So far we have been naively linking with version-less libcrypto|ssl.so,
which poses long-term maintenance problems. One could choose to link
straight with libcrypto.so.X.Y [or libcrypto.X.Y.so], but it would be
inconsistent with the way AIX [or Unix] does things.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6487)
Add irix-common template that covers even irix-shared from shared-info.pl.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6536)
- Print positive feedback in the case when 'make doc-nits' finds no errors.
- Other than before, keep the 'doc-nits' output file only in case of errors
and remove it if it is empty.
- Declare 'doc-nits' as a phony make target to facilitate rerunning
'make doc-nits' without having to remove the output file first.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6517)
Add aix-common template that covers even aix-shared from shared-info.pl,
add -bsymbolic to shared_ldflags.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6453)
The flag was apparently omitted in switch from Makefile.shared to
shared-info.pl. Do put it back! And in the process move all
solaris-shared flags from shared-info.pl to solaris-common.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6446)
Move ios targets to 15-ios.conf and modernize by deploying xcrun.
This excuses user from looking for paths and setting environment
variables. [Thanks to @0neday for hint.]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6410)
This adds the possibility to exclude files by regexp in util/copy.pl
Partial fix for #3254
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6303)
LINK can outsmart itself and choose to not update export .lib upon
corresponding .dll re-link. Since dependency is between .lib and all
.obj-s, re-compilation of any .obj makes NMAKE relink .dll and all
.exe-s over and over...
Reviewed-by: Rich Salz <rsalz@openssl.org>
deletion of *.exp files in krb5 sub-module.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6186)
config probe doesn't work in cross-compile scenarios or with clang.
In addition consolidate -Qunused-arguments handling.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6174)
Rationale for enforcing no-engine is because of disconnect between
compile-time config and run-time, which is a per-application sandbox
directory which one can't predict in advance. Besides, none of the
bundled engines actually give an edge on iOS...
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6106)
This didn't get built anyway for gcc because it was detected as a cross
compile. But it did get built for clang - even though this is still a cross
compile build. This disables it in all cases for Android.
Fixes#5748
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6057)
Configurations/90-team.conf isn't for public consumption, so we rename
it to 90-team.norelease.conf and make sure 'make dist' and 'make tar'
don't include it in the tarball.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5836)
Purpose of build_all_generated is to execute all the rules that require
perl, so that one can copy the tree to system with compiler but without
perl. This commit removes last dependencies on perl.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5929)
Computing the value of the GENERATED variable in the build file
templates is somewhat overcomplicated, and because of possible
duplication errors, changes are potentially error prone.
Looking more closely at how this list is determined, it can be
observed that the exact list of files to check is consistently
available in all the values found in the %unified_info tables
'depends', 'sources' and 'shared_sources', and all that's needed is to
filter those values so only those present as keys in the 'generate'
table are left.
This computation is also common for all build files, so due to its
apparent complexity, we move it to common0.tmpl, with the result left
in a global variable (@generated), to be consumed by all build file
templates.
common0.tmpl is included among the files to process when creating
build files, but unlike common.tmpl, it comes first of all.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5930)
HP-UX provides sockets symbols with incompatible prototypes under same
name. This caused problems in 64-bit builds. Additional macros force
unambiguous symbols with unambiguous prototypes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5742)
We started using $(CPP) instead of $(CC) -E, with the assumption that
CPP would be predefined. This is, however, not always true, and
rather depends on the 'make' implementation. Furthermore, on
platforms where CPP=cpp or something else other than '$(CC) -E',
there's a risk that it won't understand machine specific flags that we
pass to it. So it turns out that trying to use $(CPP) was a mistake,
and we therefore revert that use back to using $(CC) -E directly.
Fixes#5867
Note: this affects config targets that use Alpha, ARM, IA64, MIPS,
s390x or SPARC assembler modules.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5872)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5625)
The LIBZ macro definition was already quoted in BASE_windows, then got
quotified once more in windows-makefile.tmpl. That's a bit too much
quotations, ending up with the compiler being asked to define the
macro |"LIBZ=\"ZLIB1\""| (no, not the macro LIBZ with the value
"ZLIB1"). This is solved by removing the extra quoting in
BASE_windows.
Along with this, change the quotation of macro definitions and include
file specification, so we end up with things like -I"QuotedPath" and
-D"Macro=\"some weird value\"" rather than "-IQuotedPath" and
"-DMacro=\"some weird value\"".
Fixes#5827
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5833)
picker() is type agnostic, but its output consumer is not. Or rather
it doesn't work if picker() picks nothing when consumer expects
array. So ensure array is returned when array is expected.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5770)
