In practice this just means have a DTLS specific write_records that the
common tls_write_records() just calls. We also replace the use of
ssl3_write_pending() with tls_retry_write_records().
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
We now use standard record layer return values for this function. We
also convert the code to use RLAYERfatal instead of SSLfatal.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
At the this stage we just move the code and don't restructure it to do it
the record layer way yet.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
In preparation for moving the DTLS code to use the new write record layer
architecture we first restructure the code to create a dtls_write_records()
function that mirrors the functionality that the record layer will provide.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
do_dtls1_write() was never called with a value for create_empty_fragment
that was ever non-zero - so this is dead code and can be removed. The
equivalent code in the TLS processing is used for TLS1.0/SSLv3 to protect
against known IV weaknesses because those protocol versions do not have
an explicit IV. However DTLS1.0 is based on TLSv1.1 and *does* have an
explicit IV - so this is not useful there.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
For some reason, parenthesis were added 8 years ago in commit
a787c2590e. This essentially removed the
\. and $ constructs from the middle branches. Hence a file called e.g.
cert.key would accidentally match the (cer) rule.
CLA: trivial
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19427)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19375)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19375)
Including RIPEMD160 in both the default and legacy providers shouldn't break
anyone and makes the algorithm available more readily.
Fixes#17722
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19375)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19375)
size_t-ify the COMP_METHOD structure and functions.
Get rid of the non-functional COMP_METHODS and return NULL instead.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18186)
Use the normal OPENSSL_NO_ prefix to enable/disable ZLIB
Make `BIO_f_zlib()` always available.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18186)
Fixes#19371
running config with 'enable-sctp' gave compiler errors.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19398)
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19416)
Some primitives are designed to be used in a multi-threaded environment,
if supported, e.g., Argon2.
This patch adds support for preemptive threading and basic synchronization
primitives for platforms compliant with POSIX threads or Windows CRT.
Native functions are wrapped to provide a common (internal) API.
Threading support can be disabled at compile time. If enabled, threading
is disabled by default and needs to be explicitly enabled by the user.
Thread enablement requires an explicit limit on the number of threads that
OpenSSL may spawn (non-negative integer/infinity). The limit may be changed.
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12255)
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12255)
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12255)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19413)
Apple LLVM has a different version numbering scheme than upstream LLVM.
That makes for quite a bit of confusion.
https://en.wikipedia.org/wiki/Xcode#Toolchain_versions to the rescue,
they have collected quite a lot of useful data.
This change is concentrated around the `$avx512ifma` flag
Fixes#16670 for the master branch
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19361)
Legacy EVP_PKEY_CTX objects did not support the "group" parameter for X25519
and X448. The translation of this parameter resulted in an error. This
caused errors for legacy keys and engines.
Fix this situation by adding a translation that simply checks that the correct
parameter is to be set, but does not actually set anything. This is correct
since the group name is anyway optional for these two curves.
Fixes#19313
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19348)
This happens rarely, but only because very few CI runs
use the exotic CPU type that is necessary to execute
anything within rsaz_exp_x2.c and enable UBSAN at the same time.
crypto/bn/rsaz_exp_x2.c:562:20: runtime error: load of misaligned address 0x612000022cc6 for type 'uint64_t' (aka 'unsigned long'), which requires 8 byte alignment
0x612000022cc6: note: pointer points here
84 a3 78 e0 8e 8d 4a a5 51 9c 57 d0 d6 41 f3 26 d1 4e e1 98 42 b5 3a 9f 04 f1 73 d2 1d bf 73 44
^
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior crypto/bn/rsaz_exp_x2.c:562:20 in
../../util/wrap.pl ../../fuzz/server-test ../../fuzz/corpora/server => 1
not ok 2 - Fuzzing server
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19394)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19344)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19359)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19359)
this optimization comes from libgcrypt, increse about 48% speed
Benchmark on my AMD Ryzen Threadripper 3990X
before:
Did 5752000 SM4 setup operations in 1000151us (5751131.6 ops/sec)
after:
Did 8506000 SM4 setup operations in 1000023us (8505804.4 ops/sec)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19270)
Make sure that a TLSv1.3 only client does not send a TLSv1.3 key_share.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19317)
This should not happen but we should tolerate and send an HRR
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19317)
We should never send or accept a key share group that is not in the
supported groups list or a group that isn't suitable for use in TLSv1.3
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19317)
This removes some KTLS specific code from tls_retry_write_records().
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
The KTLS code no longer calls this function so this is not necessary.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
For example in this we add the MAC if we are doing encrypt-then-mac.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
This applies any mac that might be necessary, ensures that we have
enough space in the WPACKET to perform the encryption and sets up the
SSL3_RECORD ready for that encryption.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
Only tls13_meth.c needs to handle adding record padding. All other
*_meth.c files can ignore it.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
The KTLS cipher function is a no-op so it doesn't matter if we call it.
We shouldn't special case KTLS in tls_common.c
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
We introduce a new function to prepare the record header. KTLS has its own
version since this is done by the kernel.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
Remove TLSv1.3 specific processing of the record type out of tls_common.c
and into tls13_meth.c
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
We move some protocol specific code for write buffer and WPACKET allocation
and initialisation out of tls_common.c and into the protocol specific files.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
