When parsing the stable section of a config such as this:
openssl_conf = openssl_init
[openssl_init]
stbl_section = mstbl
[mstbl]
id-tc26 = min
Can lead to a SIGSEGV, as the parsing code doesnt recognize min as a
proper section name without a trailing colon to associate it with a
value. As a result the stack of configuration values has an entry with
a null value in it, which leads to the SIGSEGV in do_tcreate when we
attempt to pass NULL to strtoul.
Fix it by skipping any entry in the config name/value list that has a
null value, prior to passing it to stroul
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22988)
Even in the good case there was memory leak here.
Add a simple test case to have at least some test coverage.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23234)
There are several points during x509 extension creation which rely on
configuration options which may have been incorrectly parsed due to
invalid settings. Preform a value check for null in those locations to
avoid various crashes/undefined behaviors
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23183)
If a malformed config file is provided such as the following:
openssl_conf = openssl_init
[openssl_init]
providers = provider_sect
[provider_sect]
= provider_sect
The config parsing library will crash overflowing the stack, as it
recursively parses the same provider_sect ad nauseum.
Prevent this by maintaing a list of visited nodes as we recurse through
referenced sections, and erroring out in the event we visit any given
section node more than once.
Note, adding the test for this revealed that our diagnostic code
inadvertently pops recorded errors off the error stack because
provider_conf_load returns success even in the event that a
configuration parse failed. The call path to provider_conf_load has been
updated in this commit to address that shortcoming, allowing recorded
errors to be visibile to calling applications.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22898)
The newly introduced test case do not work
when configured with no-des, fix that by
choosing -aes128 as cipher.
Fixes ffed597882 ("cms: avoid intermittent test failure")
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23086)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21281)
Also add missing getter functionss OSSL_CMP_{CTX,HDR}_get0_geninfo_ITAVs() to CMP API.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21281)
If you decrypt a random input using RSAES-PKCS-v1_5, then there is a
non-negligible chance that the result will look like a valid plaintext
(that is why RSAES-PKCS-v1_5 shouldn't be used anymore). This was the
cause of an intermittent failure in a test that did a cms-encrypt
operation targetting multiple recipients.
The failure happened during key-only decrypt. The recipient decrypts
every RSA ciphertext -- only one is supposed to decrypt successfully,
which would reveal the right content-key. Occassionally, more than
one decrypted successfully.
Update the test by specifying the recipient cert in the decrypt op
(this avoids looping over all RSA ciphertexts).
Add a new test to get coverage for key-only decrypt, but use RSA-OAEP
during the encrypt op.
Fixes https://github.com/openssl/project/issues/380
Testing:
$ make TESTS='test_cms' test
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23055)
In the event that a config file contains this sequence:
=======
openssl_conf = openssl_init
config_diagnostics = 1
[openssl_init]
oid_section = oids
[oids]
testoid1 = 1.2.3.4.1
testoid2 = A Very Long OID Name, 1.2.3.4.2
testoid3 = ,1.2.3.4.3
======
The leading comma in testoid3 can cause a heap buffer overflow, as the
parsing code will move the string pointer back 1 character, thereby
pointing to an invalid memory space
correct the parser to detect this condition and handle it by treating it
as if the comma doesn't exist (i.e. an empty long oid name)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22957)
Since the gen->type will not be set in a2i_GENERAL_NAME
the gen->d.otherName will not be automatically
cleaned up by GENERAL_NAME_free.
Also fixed a similar leak in a2i_GENERAL_NAME,
where ASN1_STRING_set may fail but gen->d.ia5
will not be automatically cleaned up.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22996)
We test its validity by trying to load it.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22866)
Common symbols (type 'C' in the 'nm' output) are allowed to be defined more
than once. This makes test/recipes/01-test_symbol_presence.t reflect that.
Fixes#22869 (partially)
Fixes#22837
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22880)
On some platforms, the compiler may add symbols that aren't ours and that we
should ignore.
They are generally expected to start with a double underscore, and thereby
easy to detect.
Fixes#22869 (partially)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22880)
Instead of just accepting a number of bytes, allows openssl rand to
accept a k|m|g suffix to scale to kbytes/mbytes/gbytes
Fixes#22622
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22624)
The upper limit of the output size is the default output size of
the respective algorithm variants.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/22659)
Fixes#7894
This allows SHAKE to squeeze multiple times with different output sizes.
The existing EVP_DigestFinalXOF() API has been left as a one shot
operation. A similar interface is used by another toolkit.
The low level SHA3_Squeeze() function needed to change slightly so
that it can handle multiple squeezes. This involves changing the
assembler code so that it passes a boolean to indicate whether
the Keccak function should be called on entry.
At the provider level, the squeeze is buffered, so that it only requests
a multiple of the blocksize when SHA3_Squeeze() is called. On the first
call the value is zero, on subsequent calls the value passed is 1.
This PR is derived from the excellent work done by @nmathewson in
https://github.com/openssl/openssl/pull/7921
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21511)
This avoids code duplication and provides variable-size support
for BLAKE2s like 786b9a8
Test data obtained with libb2 with the following programs:
==> b2.c <==
#include <blake2.h>
#include <unistd.h>
int main() {
char buf[16] = {};
blake2s(buf, 0, 0, 16, 0, 0);
write(1, buf, 16);
}
==> b3.c <==
#include <blake2.h>
#include <unistd.h>
int main() {
char buf[10] = {};
blake2s(buf, "\x61", 0, 10, 1, 0);
write(1, buf, 10);
}
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22444)
To enhance test coverage for AES-ECB mode, we provided longer additional
testing patterns for AES-128/192/256-ECB.
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
To enhance test coverage for AES-XTS mode, we provided longer additional
testing patterns from BoringSSL for AES-XTS testing.
Signed-off-by: Jerry Shih <jerry.shih@sifive.com>
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
To enhance test coverage for AES-GCM mode, we provided longer additional
testing patterns for AES-GCM testing.
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Signed-off-by: Jerry Shih <jerry.shih@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
To enhance test coverage for AES-CBC mode, we provided longer additional
test patterns for AES-CBC testing.
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
BLAKE2 is not really an extensible output function unlike SHAKE
as the digest size must be set during the context initialization.
Thus it makes no sense to use OSSL_DIGEST_PARAM_XOFLEN.
We also need to adjust EVP_DigestFinal_ex() to query the
OSSL_DIGEST_PARAM_SIZE as gettable ctx param for the size.
Fixes#22488
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22491)
ACKs are not restricted by CC so do not consider CC when determining
when we will emit an ACK.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22476)
If a URXE cannot be processed yet then we add it to the urx_deferred list.
Later, when they can be processed, we requeue them in the urx_pending list.
We must not reverse the order when doing so. We want to process the URXEs
in the order that they were received.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22452)
Creating JDK compatible pkcs12 files requires a bit more than just
adding the Trusted Key Usage OID to a certbag in the pkcs12 file.
Additionally the JDK currently requires that pkcs12 files setting this
oid _not_ contain any additional keys, and in response will produce
unpredictable results.
This could be solved by implying --nokeys when the pkcs12 utility is run
and the config option is set, but thatcould confuse users who didn't
specify nokeys on the command line. As such, remove the config file
setting for this feature, and replace it with a -jdktrust command line
option, that is documented to assert nokeys when a users specifies the
new command line option.
Fixes#22215
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22422)
Fixes#22225
In OBJ_nid2obj(), if the NID does not have an OID, then a pointer to
the special "undefined" ASN1_OBJECT is returned. Check for the
undefined-ASN1_OBJECT and return an error. Also, add a test for this
in 80-test_cms.t.
Testing:
#!/bin/bash -x
shopt -s expand_aliases
alias openssl="LD_LIBRARY_PATH=~/git/openssl ~/git/openssl/apps/openssl"
echo "This is a confidential message. It should be encrypted." > msg.txt
## this should fail b/c there is no OID for aes-256-ctr
openssl cms -encrypt -in msg.txt -aes-256-ctr -out msg.txt.cms -recip demos/cms/signer.pem
echo $?
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22392)
The lower priority 'and' seems to have some "interesting" interactions with
function argument parsing in some perl versions (presumably because 'and' is
lower priority than the comma).
For the lines that are changed here, perl v5.20.1 says this:
Useless use of string eq in void context at [.test.recipes]05-test_rand.t line 33.
Useless use of numeric eq (==) in void context at [.test.recipes]05-test_rand.t line 39.
Replacing 'and' with '&&' in these two cases fixes the problem.
Replacing
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22331)
To improve Coverage mapping in Coveralls make it
possible to run test_ssl_trace() with enable-zlib
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22222)
Signed-off-by: Mathieu Tortuyaux <mathieu.tortuyaux@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22147)
Signed-off-by: Jonathan M. Wilbur <jonathan@wilbur.space>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21342)
