A few miscellaneous man page typos reported by Hal Murray on
openssl-users.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12185)
Move the three different DRBGs to the provider.
As part of the move, the DRBG specific data was pulled out of a common
structure and into their own structures. Only these smaller structures are
securely allocated. This saves quite a bit of secure memory:
+-------------------------------+
| DRBG | Bytes | Secure |
+--------------+-------+--------+
| HASH | 376 | 512 |
| HMAC | 168 | 256 |
| CTR | 176 | 256 |
| Common (new) | 320 | 0 |
| Common (old) | 592 | 1024 |
+--------------+-------+--------+
Bytes is the structure size on the X86/64.
Secure is the number of bytes of secure memory used (power of two allocator).
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11682)
POSIX mandates that time_t is a signed integer but it doesn't specify the
lenght. Having wrappers lets uses ignore this.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11682)
SSL_dup attempted to duplicate the BIO state if the source SSL had BIOs
configured for it. This did not work.
Firstly the SSL_dup code was passing a BIO ** as the destination
argument for BIO_dup_state. However BIO_dup_state expects a BIO * for that
parameter. Any attempt to use this will either (1) fail silently, (2) crash
or fail in some other strange way.
Secondly many BIOs do not implement the BIO_CTRL_DUP ctrl required to make
this work.
Thirdly, if rbio == wbio in the original SSL object, then an attempt is made
to up-ref the BIO in the new SSL object - even though it hasn't been set
yet and is NULL. This results in a crash.
This appears to have been broken for a very long time with at least some of
the problems described above coming from SSLeay. The simplest approach is
to just remove this capability from the function.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12180)
Fixes a problem where global properties don't work with a NULL query.
Specifying an algorithm with a NULL query ignores the default properties.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12123)
At the same, align documentation markup to be closer to man-pages(7)
recommendations.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12188)
Renames some "new_ex" functions to "new_with_libctx" and ensures that we
pass around the libctx AND the propq everywhere.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12159)
A number of these functions returned a NID or an array of NIDs for the
groups. Now that groups can come from the providers we do not necessarily
know the NID. Therefore we need to handle this in a clean way.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
Document the OSSL_PROVIDER_get_capabilities() function as well as the
provider side support for capabilities.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
The previous commit added the EVP_PKEY_CTX_[get|set]_group_name
functions to work with EC groups. We now extend that to also work for
DH.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
We rename these function to EVP_PKEY_CTX_get_group_name and
EVP_PKEY_CTX_set_group_name so that they can be used for other algorithms
other than EC.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
Provide a function to applications to query the capabilities that a
provider can perform.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
CLA: trivial
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12161)
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12172)
For FIPS validation purposes - Automated Cryptographic Validation Protocol (ACVP) tests need to be
performed. (See https://github.com/usnistgov/ACVP). These tests are very similiar to the old CAVS tests.
This PR uses a hardwired subset of these test vectors to perform similiar operations,
to show the usage and prove that the API's are able to perform the required operations.
It may also help with communication with the lab (i.e- The lab could add a test here to show
a unworking use case - which we can then address).
The EVP layer performs these tests instead of calling lower level API's
as was done in the old FOM.
Some of these tests require access to internals that are not normally allowed/required.
The config option 'acvp_tests' (enabled by default) has been added so that this
access may be removed.
The mechanism has been implemented as additional OSSL_PARAM values that can be set and get.
A callback mechanism did not seem to add any additional benefit.
These params will not be added to the gettables lists.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11572)
Add/extend range check for 'fd' argument of BIO_socket_wait() and bio_wait()
Correct nap time calculations in bio_wait(), thus correcting also BIO_wait()
Update a type cast from 'unsigned long' to 'unsigned int'
Extend the comments and documentation of BIO_wait()
Rename BIO_connect_retry() to BIO_do_connect_retry()
Make its 'timeout' argument < 0 lead to BIO_do_connect() tried only once
Add optional 'nap_milliseconds' parameter determining the polling granularity
Correct and generalize the retry case checking
Extend the comments and documentation of BIO_do_connect_retry()
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11986)
as checking expected_sender and adding caPubs is not part of msg validation.
Also constify a couple of internal and public functions related to cmp_vfy.c
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11998)
Bugfix: allow using extraCerts contained in msg already while checking signature
Improve function name, simplify its return value, and update its documentation
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11998)
Some hash algorithms are only provided by the legacy provider. This
information is not mentioned in EVP_md4(3) for md4 and one might wonder
why it is no longer working.
Add a note to the EVP_ man page for md2, md4, mdc2, ripemd160 and
whirlpool that it is only available with the legacy provider.
Fixes#11650
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12074)
functions are now EVP_MAC functions, usually with ctx in their names.
Before 3.0 is released, the names are mutable and this prevents more
inconsistencies being introduced.
There are no functional or code changes.
Just the renaming and a little reformatting.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11997)
The EVP_KDF_CTX_* functions have been relocated to the EVP_KDF_* namespace
for consistency.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11996)
Fixes#11742Fixes#11764
The newer RSA sp800-56b algorithm is being used for the normal case of a non multiprime key of at least length 2048.
Insecure key lengths and mutltiprime RSA will use the old method.
Bad public exponents are no longer allowed (i.e values less than 65537 or even). Values such as 2 that would cause a infinite loop now result in an error. The value of 3 has been marked as deprecated but is still allowed for legacy purposes.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11765)
Among others, make clear that OSSL_STORE_close() meanwhile does nothing on NULL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11733)
Also documents that they meanwhile try all IP addresses resolved for a given domain name
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12017)
EVP_PKEY_[get1|set1]_tls_encodedpoint() only worked if an ameth was present
which isn't the case for provided keys. Support has been added to dh,
ec and ecx keys.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11898)
Implement a function which enables us to get hold of the provider ctx
for a loaded provider.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
This is useful to get hold of the low-level dispatch tables. This could
be used to create a new provider based on an existing one.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
This mode is severely untested and unmaintained, is seems not to be
used very much.
Closes#4679Closes#6292
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12023)
Merge test/P[12]ss.cnf into one config file
Merge CAss.cnf and Uss.cnf into ca-and-certs.cnf
Remove Netscape cert extensions, add keyUsage comment from some cnf files
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11347)
Correct "EC_KEY_point2buf" to "EC_POINT_point2buf". The former does not exist.
CLA: trivial
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11988)
The underlying functions remain and these are widely used.
This undoes the deprecation part of PR8442
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12001)
A CAVEATS section is present in this manual. That section name is
borrowed from OpenBSD, where mdoc(7) explains it like this:
CAVEATS
Common misuses and misunderstandings should be explained in this
section.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11963)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11976)
for signing certificate V2 and signing certificate extensions.
CAdES: lowercase name for now internal methods.
crypto/cms: generated file changes.
Add some CHANGES entries.
[extended tests]
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8098)
Mostly "No items in =over/=back list"
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11902)
Renamed some values in core_names i.e Some DH specific names were changed to use DH instead of FFC.
Added some strings values related to RSA keys.
Moved set_params related docs out of EVP_PKEY_CTX_ctrl.pod into its own file.
Updated Keyexchange and signature code and docs.
Moved some common DSA/DH docs into a shared EVP_PKEY-FFC.pod.
Moved Ed25519.pod into EVP_SIGNATURE-ED25519.pod and reworked it.
Added some usage examples. As a result of the usage examples the following change was also made:
ec allows OSSL_PKEY_PARAM_USE_COFACTOR_ECDH as a settable gen parameter.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11610)
This fixes a strict aliasing issue in ui_dup_method_data.
The parameter type of CRYPTO_EX_dup's from_d parameter
is in fact void **, since it points to a pointer.
This function is rarely used, therefore fix the param type
although that may be considered an API breaking change.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2986)
Partially fixes#11209.
Before OpenSSL 3.0 in case when peer does not send close_notify,
the behaviour was to set SSL_ERROR_SYSCALL error with errno 0.
This behaviour has changed. The SSL_OP_IGNORE_UNEXPECTED_EOF restores
the old behaviour for compatibility's sake.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11735)
As the documentation points out, these fipsmodule.cnf fields are a MAC,
not a digest or checksum. Rename them to be correct.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11369)
When a desired algorithm wasn't available, we didn't register anywhere
that an attempt had been made, with the result that next time the same
attempt was made, the whole process would be done again.
To avoid this churn, we register a bit for each operation that has
been queried in the libcrypto provider object, and test it before
trying the same query and method construction loop again.
If course, if the provider has told us not to cache, we don't register
this bit.
Fixes#11814
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11842)
The previous commit changed the types of various objects passed between
the core and providers. Therefore the documentation needs to be updated
to reflect that.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11758)
This also adds the more flexible and general load_key_cert_crl()
as well as helper functions get_passwd(), cleanse(), and clear_free()
to be used also in apps/cmp.c etc.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11755)
Also update documentation and example code in openssl-cmp.pod.in
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11470)
Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11470)
This capability existed internally, and is now made public.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11756)
For those files, the dependence on configdata.pm is automatic, adding
it explicitly only results in having that dependency twice.
Fixes#11786
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11790)
Signed-off-by: Beat Bolli <dev@drbeat.li>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/11759)
The apps that are staying are: dhparam, dsa, dsaparam, ec, ecparam, gendsa and
rsa.
The rsautl app remains deprecated.
The -dsaparam option to dhparam also remains deprecated.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11575)
EVP_PKEY_CTX_gettable_params() was missing code for the keygen operation.
After adding it it was noticed that it is probably not required for this type, so instead
the gen_get_params and gen_gettable_params have been remnoved from the provider interface.
gen_get_params was only implemented for ec to get the curve name. This seems redundant
since normally you would set parameters into the keygen_init() and then generate a key.
Normally you would expect to extract data from the key - not the object that we just set up
to do the keygen.
Added a simple settable and gettable test into a test that does keygen.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11683)
The documentation for ``EVP_default_properties_is_fips_enabled()`` uses
``fips=yes`` in one place and ``fips=true`` in another place. Stick to
``fips=yes`` like everywhere else.
Signed-off-by: Christian Heimes <christian@python.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11723)
Add X509_VERIFY_PARAM_get0_host(), X509_VERIFY_PARAM_get0_email(),
and X509_VERIFY_PARAM_get1_ip_asc() to support this,
as well as the internal helper function ipaddr_to_asc(), which
is used also for simplifying other IP address output functions.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11693)
We may just want to know the number of octets so allow passing a NULL
buffer.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11635)
Document the newly added EVP_PKEY_new_raw_private_key_with_libctx and
EVP_PKEY_new_raw_public_key_with_libctx functions.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11635)
This API requests that the TLS stack generate a (TLS 1.3)
NewSessionTicket message the next time it is safe to do so (i.e., we do
not have other data pending write, which could be mid-record). For
efficiency, defer actually generating/writing the ticket until there
is other data to write, to avoid producing server-to-client traffic when
not needed.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11416)
These were deemed information and useful and that they should not be
deprecated.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11669)
A small number of files contain references to the "OpenSSL license"
which has been deprecated and replaced by the "Apache License 2.0".
Amend the occurences.
Fixes#11649
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11663)
A little spell checking.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11644)
Make use of new load_csr() in 'ca', 'req', and 'x509' app
Add '-inform' and '-certform' option to 'ca' app
Add 'desc' parameter to load_crl() function defined in apps/lib/apps.c
Allow 'desc' parameter to be NULL (gives option to suppress error output)
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/4940)
... and only *define* them in the source files that need them.
Use DEFINE_OR_DECLARE which is set appropriately for internal builds
and not non-deprecated builds.
Deprecate stack-of-block
Better documentation
Move some ASN1 struct typedefs to types.h
Update ParseC to handle this. Most of all, ParseC needed to be more
consistent. The handlers are "recursive", in so far that they are called
again and again until they terminate, which depends entirely on what the
"massager" returns. There's a comment at the beginning of ParseC that
explains how that works. {Richard Levtte}
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10669)
The manpage is basically rewritten. Use consistent name/value
terminology. Use consistent phraseology to refer to section pointers
and lists of section pointers. Add more cross-references.
Also found a bunch of trivial style things in conf_api.c while
investigating how config works.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11431)
- Changed the generated FIPS signature file to be "fipsmodule.conf"
since it contains information about the FIPS module/file.
- Add -q option to fipsinstall command, to stop chatty verbose status
messages.
- Document env var OPENSSL_CONF_INCLUDE
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11177)
This adds handling of the parameter "mandatory-digest" and responds
with an empty string, meaning that no digest may be used.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11576)
evp_keymgmt_util_get_deflt_digest_name() is a refactor of the provider
side key part of EVP_PKEY_get_default_digest_name(), that takes
EVP_KEYMGMT and provider keydata pointers instead of an EVP_PKEY
pointer.
We also ensure that it uses SN_undef as the default name if the
provider implementation gave us an empty string, since this is what
EVP_PKEY_get_default_digest_name() responds when getting the digest
name via a EVP_PKEY_ASN1_METHOD ctrl call that returns NID_undef.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11576)
fix doc of s_client and s_server credentials and verification options
fix doc of verification options also for s_time, x509, crl, req, ts, and verify
correcting and extending texts regarding untrusted and trusted certs,
making the order of options in the docs and help texts more consistent,
etc.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11273)
DH_set0_pqg() is now responsible for caching the nid, q and length.
DH with or without named safe prime groups now default to using the maximum private key length (BN_num_bits(q) - 1)
when generating a DH private key. The code is now shared between fips and non fips mode for DH key generation.
The OSSL_PKEY_PARAM_DH_PRIV_LEN parameter can be used during keygen to override the maximum private key length to be
in the range (2 * strength ... bits(q) - 1). Where the strength depends on the length of p.
Added q = (p - 1) / 2 safe prime BIGNUMS so that the code is data driven (To simplify adding new names).
The BIGNUMS were code generated.
Fix error in documented return value for DH_get_nid
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11562)
This adds text the should lead the user to documentation on different
KEYMGMT implementations.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11220)
The calls weren't quite right, as this function has changed its behaviour.
We also change the internal documentation of this function, and document
evp_pkey_downgrade().
Fixes#11549
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11550)
Moved some shared FFC code into the FFC files.
Added extra paramgen parameters for seed, gindex.
Fixed bug in ossl_prov util to print bignums.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11303)
The macros are converted to functions, and are modified to support
provider implementations.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11328)
The `add` and `seed` callbacks were changed to return `int` instead of
`void` in b6dcdbfc94 (first included in
tag OpenSSL_1_1_0-pre1).
The `add` callback was changed to take a `double` instead of an `int`
in 853f757ece.
CLA: trivial
Fixes: #10199
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11486)
By loading the null provider into the default context, it is possible
to verify that it is not accidentally being used.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11488)
EVP_PKEY_is_a() is the provider side key checking function corresponding
to checking EVP_PKEY_id() or an EVP_PKEY against macros like EVP_PKEY_EC.
It also works with legacy internal keys.
We also add a warning indoc/man3/EVP_PKEY_set1_RSA.pod regarding the
reliability of certain functions that only understand legacy keys.
Finally, we take the opportunity to clean up doc/man3/EVP_PKEY_set1_RSA.pod
to better conform with man-page layout norms, see man-pages(7) on Linux.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11358)
The warning is deter the unsure -- if in doubt the PTR type is almost certainly
NOT what you should be using.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11480)
This library is meant to be small and quick. It's based on WPACKET,
which was extended to support DER writing. The way it's used is a
bit unusual, as it's used to write the structures backward into a
given buffer. A typical quick call looks like this:
/*
* Fill in this structure:
*
* something ::= SEQUENCE {
* id OBJECT IDENTIFIER,
* x [0] INTEGER OPTIONAL,
* y [1] BOOLEAN OPTIONAL,
* n INTEGER
* }
*/
unsigned char buf[nnnn], *p = NULL;
size_t encoded_len = 0;
WPACKET pkt;
int ok;
ok = WPACKET_init_der(&pkt, buf, sizeof(buf)
&& DER_w_start_sequence(&pkt, -1)
&& DER_w_bn(&pkt, -1, bn)
&& DER_w_boolean(&pkt, 1, bool)
&& DER_w_precompiled(&pkt, -1, OID, sizeof(OID))
&& DER_w_end_sequence(&pkt, -1)
&& WPACKET_finish(&pkt)
&& WPACKET_get_total_written(&pkt, &encoded_len)
&& (p = WPACKET_get_curr(&pkt)) != NULL;
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11450)
Explain that XTS does not support streaming, and that the IV value is the
tweak.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11461)
Also improve the generic HTTP client w.r.t. proxy and no_proxy options.
Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11404)
When the -WWW or -HTTP option is specified, s_server can choose
to use SSL_sendfile to transmit the file requested by client
with KTLS is enabled, taking full advantage of the performance
advantages of Kernel TLS, and adding the '-sendfile' command
line parameter to control this behavior.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11318)
Currently only RSA, EC and ECX are supported (DH and DSA need to be added to the keygen
PR's seperately because the fields supported have changed significantly).
The API's require the keys to be provider based.
Made the keymanagement export and get_params functions share the same code by supplying
support functions that work for both a OSSL_PARAM_BLD as well as a OSSL_PARAM[].
This approach means that complex code is not required to build an
empty OSSL_PARAM[] with the correct sized fields before then doing a second
pass to populate the array.
The RSA factor arrays have been changed to use unique key names to simplify the interface
needed by the user.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11365)
Various functions cause the results of processing extensions to be
cached. The processing itself requires a libctx, and so this implicit
caching means that the default ctx is used which can lead to failures.
By explicitly caching the extensions we can specify the libctx to be used.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11409)
Prior to this, the param builder had a statically sized array internally.
This changes it so that it uses a stack instead.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11390)
Since this is public, it is best to make the underlying structure opaque.
This means converting from stack allocation to dynamic allocation for all
usages.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11390)
The catalyst for this is the difficult of passing BNs through the other
OSSL_PARAM APIs.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11390)
This includes the newly added *_ex() variants that take a libctx/property
query string.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11410)
OCSP_RESPID_set_by_key() calculates a SHA1 hash of the supplied
certificate. We need to be able to specify which libctx and property
query string is used to fetch that algorithm so we introduce
OCSP_RESPID_set_by_key_ex() which does the same thing but enables you to
speicfy the library context and propery query string explicitly.
OCSP_RESPID_match() matches with certificates based on the SHA1 hash.
Therefore for the same reason we introduce OCSP_RESPID_match_ex().
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11407)
This function intialises an EVP_PKEY to contain a provider side internal
key.
We take the opportunity to also document the older EVP_PKEY_set_type()
and EVP_PKEY_set_type_str().
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11375)
Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11300)
Merge the NOTES section into the relevant parts of the manpage.
Add the $EXTRA parameter in consistent places (the end) to call
commands. Document that multiple -extra-XXX might be needed.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11338)
EVP_DigestSignInit_ex and EVP_DigestVerifyInit_ex did not provide the
capability to specify an explicit OPENSSL_CTX parameter. It is still
possible by explicitly setting an EVP_PKEY_CTX - but in most cases it
would be much simpler to just specify it in the Init call. We add the
capability to do that.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11353)
in particular X509_NAME*, X509_STORE{,_CTX}*, and ASN1_INTEGER *,
also some result types of new functions, which does not break compatibility
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/10504)
Basically we use EXFLAG_INVALID for all kinds of out of memory and
all kinds of parse errors in x509v3_cache_extensions.
[extended tests]
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10755)
The self tests for the fips module are triggered on startup and they need to know the
core's libctx in order to function correctly. As the provider can be autoloaded via configuration
it then needs to propagate the callers libctx down to the provider via the config load.
Note that OPENSSL_init_crypto(OPENSSL_INIT_LOAD_CONFIG, ..) is still called, but will only load the default
configuration if the OPENSSL_CONF environment variable is set.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11240)
SM2 IDs are now passed entirely as '-pkeyopt', '-sigopt' or '-vfyopt'
values, just like any other valid option.
Fixes#11293
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/11302)
- X509_set0_sm2_id() -> X509_set0_distinguishing_id()
- X509_get0_sm2_id() -> X509_get0_distinguishing_id()
- X509_REQ_set0_sm2_id -> X509_REQ_set0_distinguishing_id()
- X509_REQ_get0_sm2_id -> X509_REQ_get0_distinguishing_id()
The reason for this rename is that the SM2 ID isn't really a unique
SM2 data item, but rather a re-use of the Distinguished that is
defined in ISO/IEC 15946-3 as well as in FIPS 196, with no special
attribution toward any algorithm in particular.
Fixes#11293
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/11302)
They were claimed to be the SKIP primes but they are really two of the
MODP Diffie-Hellman groups for IKE.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11314)
The generated macros are TYPE_get_ex_new_index() (to match
CRYPTO_get_ex_new_index()), not TYPE_get_new_ex_index(), even though
the latter spelling seems more natural.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10943)
Generally modernize the language.
Refer to TLS instead of SSL/TLS, and try to have more consistent
usage of commas and that/which.
Reword some descriptions to avoid implying that a list of potential
reasons for behavior is an exhaustive list.
Clarify how get_session_cb() is only called on servers (i.e., in general,
and that it's given the session ID proposed by the client).
Clarify the semantics of the get_cb()'s "copy" argument.
The behavior seems to have changed in commit
8876bc0548, though the behavior prior
to that commit was not to leave the reference-count unchanged if
*copy was not written to -- instead, libssl seemed to assume that the
callback already had incremented the reference count.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10943)
CLA: trivial
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11299)
The following functions are added:
EVP_PKEY_gen_set_params(), replacing the older EVP_PKEY_CTX_ctrl()
EVP_PKEY_gen(), replacing both EVP_PKEY_keygen() and EVP_PKEY_paramgen()
These functions are made to work together with already existing domparams
and key generation functionality: EVP_PKEY_CTX_new_provided(),
EVP_PKEY_paramgen_init(), EVP_PKEY_keygen_init(), etc.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10289)
We introduce these dispatched functions:
- OP_keymgmt_gen_init() to initialize the key object generation.
- OP_keymgmt_gen_set_template() to set a template for key object
generation. The template is another key object, for example one
with domain parameters.
- OP_keymgmt_gen_set_params() to set other key object generation
parameters.
- OP_keymgmt_gen_settable_params() to find out what settable
parameters there are.
- OP_keymgmt_gen() to perform the key object generation.
- OP_keymgmt_gen_cleanup() to clean up the key object generation.
Internal function for easy and consistent use of these ddispatched
functions are added.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10289)
Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11142)
EVP_MD_CTX_ctrl() translates some known control commands when faced
with a fetched EVP_MD, so we need to document it.
This also ensures that we don't drop the information on the "micalg"
parameter entirely.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11270)
The provider- manuals are meant to describe the general interface for
their respective operation. This is not the place to describe
implementation specific details.
This change creates a number of doc/man7/EVP_MD manuals, one for each
algorithm or set of algorithms, as well as doc/man7/EVP_MD-common.pod
to describe what's common to them all.
While we're at it, correct the SHA3 settable context params array to
match what's actually settable.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11270)
This adds doc/man7/OSSL_PROVIDER-default.pod and OSSL_PROVIDER-legacy.pod,
and fills in currently implemented operations and algorithms in them, as
well as in doc/man7/OSSL_PROVIDER-FIPS.pod, with links to documentation to
come.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11270)
CLA: trivial
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11253)
As well as the newly added "one shot" functions, we also document a number
of the other other digestsign functions which were missing documentation in
provider-signature.pod.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11261)
This removes "req" as the hardwired section for the req command.
Doing this will let us merge some test configs.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11249)
Add a -provider option to allow providers to be loaded. This option can be
specified multiple times.
Add a -provider_path option to allow the path to providers to be specified.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11167)
With the introduction of provider command line options which are applicable to
almost all of the command line tools, it seemed reasonable to make them all
generated. This simplifes the .gitignore and avoids having to keep two lists
in sync.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11167)
Fixes#11108.
It only sets q if a valid named group is found.
The function signature was recently changed to pass a non const DH pointer
in order to allow the nid to be cached internally. As an extension of this
the value of q can now also be set as q is always known for named groups.
The length field is also set if q is set.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11114)
EVP_PKEY_get_raw_private_key() and EVP_PKEY_get_raw_public_key() expect
the size of the key buffer to be populated in the |*len| parameter on
entry - but the docs made no mention of this.
Fixes#11245
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11254)
The default is openssl.cnf The project seems to prefer xxx.conf these
days, but we should use the default convention.
Rename all foo.conf (except for Configurations) to foo.cnf
Fixes#11174
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11176)
Provide EC serializers for text, pem and der.
EC parameters use ANS1 'CHOICE' - which means they are more embedded than other parameters used by
other KEY types (which normally have a SEQUENCE at the top level).
For this reason the ANS1_STRING type that was being passed around has been changed to a void so that the
code can still be shared with EC.
The EC serializer only supports named curves currently.
NOTE the serializer code assumes PKCS8 format - if the older encode methods are needed they will need to be
added in another PR. (Probably when deserialization is considered).
EVP_PKEY_key_fromdata_init was changed from using a keypair selection to all bits of a key. A side effect of this was
that the very restrictive checks in the ecx code needed to be relaxed as it was assuming all selection flags were non
optional. As this is not the case for any other key the code has been modified.
Fixed a bug in legacy_ctrl_str_to_params() - "ecdh_cofactor_mode" was being incorrectly converted to the wrong keyname.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11107)
The find-doc-nits complains about non-zero word and about missing
line before =head1 which causes build failure.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11231)
Use case: having a variable with multiple source files in its value,
and wanting to refer to the corresponding object file.
$SRCS=foo.c bar.c
SOURCE[program]=$SRCS
DEPEND[${SRCS/.c/.o}]=prog.h
GENERATE[prog.h]=...
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11185)
So far, the "index" part of KEYWORD[whatever] could only handle one
item. There are cases, however, where we want to add the exact same
value to multiple items. This is especially helpful if a variable
that may have multi-item values are used in the "index" part.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11185)
Provide serializers for X25519 and X448 for text, pem and der. There are
no parameter serializers because there are no parameters for these
algorithms.
Add some documentation about the various import/export types available
Add additional testing for the serializers
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11095)
CAkeyform may be set to PEM, DER or ENGINE, but the current options
are not using the proper optionformat 'E' (OPT_FMT_PDE) for this.
Set the valtype for CAkeyform to 'E' and use OPT_FMT_PDE when extracting
the option value.
This amends 0ab6fc79a9 ("Fix regression on x509 keyform argument") which
did the same thing for keyform and changed the manpage synopsis entries
for both keyform and CAkeyform but did not change the option section.
Hence, change the option section for both of them.
CLA: trivial
Co-developed-by: Torben Hohn <torben.hohn@linutronix.de>
Signed-off-by: Torben Hohn <torben.hohn@linutronix.de>
Signed-off-by: Bastian Germann <bage@linutronix.de>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11085)
The example never executes code inside of the while loop, as read()
returns bigger number than 0. Thus the end result is wrong.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11143)
Add a note indicating that the minimum size parameter to
CRYPTO_secure_malloc_init() should be small.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11149)
Previously, evp-keymgmt_util_export_to_provider() took care of all
kinds of exports of EVP_PKEYs to provider side keys, be it from its
legacy key or from another provider side key. This works most of the
times, but there may be cases where the caller wants to be a bit more
in control of what sort of export happens when.
Also, when it's time to remove all legacy stuff, that job will be much
easier if we have a better separation between legacy support and
support of provided stuff, as far as we can take it.
This changes moves the support of legacy key to provider side key
export from evp-keymgmt_util_export_to_provider() to
evp_pkey_make_provided(), and makes sure the latter is called from all
EVP_PKEY functions that handle legacy stuff.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11074)
Clean up a manual we've touched, according to conventions found in
Linux' man-pages(7); function arguments in descriptions should be in
italics, and types, macros and similar should be in bold, with the
exception for NULL.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10557)
This includes legacy PSS controls to params conversion, and an attempt
to generalise the parameter names when they are suitable for more than
one operation.
Also added crypto/rsa/rsa_aid.c, containing proper AlgorithmIdentifiers
for known RSA+hash function combinations.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10557)
We were excluding more code than we needed to in the OCSP/HTTP code in
the event of no-sock. We should also not assume that a BIO passed to our
API is socket based.
This fixes the no-sock build
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11134)
Replace the properties default, fips and legacy with a single property
called "provider". So, for example, instead of writing "default=yes" to
get algorithms from the default provider you would instead write
"provider=default". We also have a new "fips" property to indicate that
an algorithm is compatible with FIPS mode. This applies to all the
algorithms in the FIPS provider, as well as any non-cryptographic
algorithms (currently only serializers).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11097)
Add options to change the parameter encoding and point conversions for EC
public and private keys. These options are present in the deprecated 'ec'
utility.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11113)
Specifically, refer from the deprecated tools to the pkey equivalents.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11113)
Use of the low level DH functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11024)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
Most of all, the base X509_LOOKUP functionality is now documented.
Furthermore, the names X509_LOOKUP_METHOD and X509_STORE are added for
reference.
Some functions were moved from X509_LOOKUP_meth_new.pod
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10986)
add CMP message validation and related tests; while doing so:
* add ERR_add_error_mem_bio() to crypto/err/err_prn.c
* move ossl_cmp_add_error_txt() as ERR_add_error_txt() to crypto/err/err_prn.c
* add X509_STORE_CTX_print_verify_cb() to crypto/x509/t_x509.c,
adding internally x509_print_ex_brief(), print_certs(), and print_store_certs()
* move {ossl_cmp_,}X509_STORE_get1_certs() to crypto/x509/x509_lu.c
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/10620)
in addition:
correct wording in doc, comments, and parameter names: self-signed -> self-issued where appropriate
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/10620)
in particular:
consolidate documentation of CMP logging and error reporting functions
fix compilation problem with clang on some platforms
rename OSSL_CMP_log etc. to ossl_cmp_log etc. since these macros are CMP-internal
move chopping of trailing separator to ossl_cmp_add_error_txt(), also fix handling of leading separator
internalize X509_print_ex_brief() as x509_print_ex_brief()
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/10620)
The BIO_f_buffer() documentation tells in enough detail how it affects
BIO_gets(), but not how it affects BIO_read_ex(). This change
remedies that.
Fixes#10859
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10890)
OpenSSL 1.1.0 has extended option checking, and rejects passing a PKCS#11
engine URL to "-signkey" option. The actual code is ready to take it.
Change the option parsing to allow an engine URL to be passed and modify
the manpage accordingly.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11086)
