The previous 2 commits moved supported groups and ciphers out of the
session object to avoid race conditions. We now also move ecpointformats
for consistency. There does not seem to be a race condition with access
to this data since it is only ever set in a non-resumption handshake.
However, there is no reason for it to be in the session.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9162)
Make sure that the combination of no-ec with no-dh builds successfully.
If neither ec or dh are available then TLSv1.3 is not possible.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9156)
Now that we have TLSv1.3 FFDHE support there is no reason why we should
not allow TLSv1.3 to be used in a no-ec build. This commit enables that
to happen.
It also fixes no-ec which was previously broken.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9156)
With the removal of SSLv2, the s3 structure is always allocated, so
there is little point in having it be an allocated pointer. Collapse
the ssl3_state_st structure into ssl_st and fixup any references.
This should be faster than going through an indirection and due to
fewer allocations, but I'm not seeing any significant performance
improvement; it seems to be within the margin of error in timing.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7888)
SSL_get_signature_nid() -- local signature algorithm
SSL_get_signature_type_nid() -- local signature algorithm key type
SSL_get_peer_tmp_key() -- Peer key-exchange public key
SSL_get_tmp_key -- local key exchange public key
Aliased pre-existing SSL_get_server_tmp_key(), which was formerly
just for clients, to SSL_get_peer_tmp_key(). Changed internal
calls to use the new name.
Reviewed-by: Matt Caswell <matt@openssl.org>
TLSv1.3 is more restrictive about the curve used. There must be a matching
sig alg defined for that curve. Therefore if we are using some other curve
in our certificate then we should not negotiate TLSv1.3.
Fixes#7435
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7442)
Rather than relying only on mandatory default digests, add a way for
the EVP_PKEY to individually report whether each digest algorithm is
supported.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7408)
If the private key says it can only support one specific digest, then
don't ask it to perform a different one.
Fixes: #7348
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7408)
If we have selected a ciphersuite using RSA key exchange then we must
not attempt to use an RSA-PSS cert for that.
Fixes#7059
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7099)
We need to ensure that the min-max version range we use when constructing
the ClientHello is the same range we use when we validate the version
selected by the ServerHello. Otherwise this may appear as a fallback or
downgrade.
Fixes#6964
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7013)
Using the rsa_pss_rsae_sha256 sig alg should imply that the key OID is
rsaEncryption. Similarly rsa_pss_pss_sha256 implies the key OID is
rsassaPss. However we did not check this and incorrectly tolerated a key
OID that did not match the sig alg sent by the peer.
Fixes#6611
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6732)
Don't call the decrypt ticket callback if we've already encountered a
fatal error. Do call it if we have an empty ticket present.
Change the return code to have 5 distinct returns codes and separate it
from the input status value.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6198)
The return value from the ticket_key callback was not properly handled in
TLSv1.3, so that a ticket was *always* renewed even if the callback
requested that it should not be.
Also the ticket decrypt callback was not being called at all in TLSv1.3.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6198)
The MAX_CURVELIST macro defines the total number of in-built SSL/TLS curves
that we support. However it has not been updated as new curves are added.
Fixes#5232
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6065)
The spec does not prohib certs form using compressed points. It only
requires that points in a key share are uncompressed. It says nothing
about point compression for certs, so we should not fail if a cert uses a
compressed point.
Fixes#5743
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6055)
If a server has been configured to use an ECDSA certificate, we should
allow it regardless of whether the server's own supported groups list
includes the certificate's group.
Fixes#2033
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5601)
Place the session ticket AES and HMAC keys into secure memory.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2351)
Conceptually in TLSv1.3 there can be multiple sessions associated with a
single connection. Each NewSessionTicket issued can be considered a
separate session. We can end up issuing multiple NewSessionTickets on a
single connection at the moment (e.g. in a post-handshake auth scenario).
Each of those issued tickets should have the new_session_cb called, it
should go into the session cache separately and it should have a unique
id associated with it (so that they can be found individually in the
cache).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5644)
Adds application data into the encrypted session ticket
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3802)
This could in theory result in an overread - but due to the over allocation
of the underlying buffer does not represent a security issue.
Thanks to Fedor Indutny for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5414)
The check for a duplicate value was reading one entry past
where it was supposed to, getting an uninitialized value.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5172)
The new extension is like signature_algorithms, but only for the
signature *on* the certificate we will present to the peer (the
old signature_algorithms extension is still used for signatures that
we *generate*, i.e., those over TLS data structures).
We do not need to generate this extension, since we are the same
implementation as our X.509 stack and can handle the same types
of signatures, but we need to be prepared to receive it, and use the received
information when selecting what certificate to present.
There is a lot of interplay between signature_algorithms_cert and
signature_algorithms, since both affect what certificate we can
use, and thus the resulting signature algorithm used for TLS messages.
So, apply signature_algorithms_cert (if present) as a filter on what
certificates we can consider when choosing a certificate+sigalg
pair.
As part of this addition, we also remove the fallback code that let
keys of type EVP_PKEY_RSA be used to generate RSA-PSS signatures -- the
new rsa_pss_pss_* and rsa_pss_rsae_* signature schemes have pulled
the key type into what is covered by the signature algorithm, so
we should not apply this sort of compatibility workaround.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5068)
Our historical SSL{,_CTX}_set_sigalgs() APIs take an array of
NID pairs (hash and signature), and our parser for manually
specifying unified sigalgs (that do not necessarily correspond
to an actual signature+hash pair) was transiting via (the implementation
of) this historical API. The TLS 1.3 draft-23 has introduced
signature schemes that have identical signature type and hash type,
differing only in the (RSA) public key OID, which prevents
the rsa_pss_pss_* schemes from being properly identified and
sent on the wire.
To fix the issue, parse sigalg strings directly into SIGALG_LOOKUP
objects, and pass around an array of uint16 wire protocol values
instead of NID pairs. The old interface is retained for API
compatibility but will become less and less useful with time.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5068)
We now have a split in the signature algorithms codepoint space for
whether the certificate's key is for rsaEncryption or a PSS-specific
key, which should let us get rid of some special-casing that we
previously needed to try to coax rsaEncryption keys into performing PSS.
(This will be done in a subsequent commit.)
Send the new PSS-with-PSS-specific key first in our list, so that
we prefer the new technology to the old one.
We need to update the expected certificate type in one test,
since the "RSA-PSS+SHA256" form now corresponds to a public key
of type rsaEncryption, so we should expect the server certificate
type to be just "RSA". If we want to get a server certificate
type of "RSA-PSS", we need to use a new signature algorithm
that cannot be represented as signature+hash, so add a test for that
as well.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5068)
Extract the RSA key using EVP_PKEY_get0. Type is checked externally to be either EVP_PKEY_RSA_PSS or EVP_PKEY_RSA.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4389)
It's argued that /WX allows to keep better focus on new code, which
motivates its comeback...
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4721)
Add a check for NULL return in t1_lib.c.
Since return type of ssl_cert_lookup_by_idx is pointer and unify coding
style, I changed from zero to NULL in ssl_cert.c.
Remove unnecessary space for ++.
Fix incorrect condition
Expression is always false because 'else if' condition matches previous
condition. SInce the next line of 'else if' condition has substituted
TLSEXT_ECPOINTFORMAT_ansiX962_compressed_char2, the 'else if'
condition should compare with NID_X9_62_characteristic_two_field.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4562)
The function tls_check_curve is only called on clients and contains
almost identical functionaity to tls1_check_group_id when called from
a client. Merge the two.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4475)
Rename tls1_get_curvelist to tls1_get_grouplist, change to void as
it can never fail and remove unnecessary return value checks. Clean
up the code.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/=4412)
Replace existing compression and groups check with two functions.
tls1_check_pkey_comp() checks a keys compression algorithms is consistent
with extensions.
tls1_check_group_id() checks is a group is consistent with extensions
and preferences.
Rename tls1_ec_nid2curve_id() to tls1_nid2group_id() and make it static.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/=4412)
Replace tls1_ec_curve_id2nid() with tls_group_id_lookup() which returns
the TLS_GROUP_INFO for the group.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/=4412)
Instead of storing supported groups in on-the-wire format store
them as parsed uint16_t values. This simplifies handling of groups
as the values can be directly used instead of being converted.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4406)
Compilation failed due to -Werror=misleading-indentation.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4395)
Allo RSA certificate to be used for RSA-PSS signatures: this needs
to be explicit because RSA and RSA-PSS certificates are now distinct
types.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4368)
Removed e_os.h from all bar three headers (apps/apps.h crypto/bio/bio_lcl.h and
ssl/ssl_locl.h).
Added e_os.h into the files that need it now.
Directly reference internal/nelem.h when required.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
The functiontls12_get_pkey_idx is only used to see if a certificate index is
enabled: call ssl_cert_is_disabled instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3858)
In draft-ietf-tls-tls13-20 Appendix B we find that:
This section describes protocol types and constants. Values listed
as _RESERVED were used in previous versions of TLS and are listed
here for completeness. TLS 1.3 implementations MUST NOT send them
but might receive them from older TLS implementations.
Similarly, in section 4.2.3 we see:
Legacy algorithms Indicates algorithms which are being deprecated
because they use algorithms with known weaknesses, specifically
SHA-1 which is used in this context with either with RSA using
RSASSA-PKCS1-v1_5 or ECDSA. These values refer solely to
signatures which appear in certificates (see Section 4.4.2.2) and
are not defined for use in signed TLS handshake messages.
Endpoints SHOULD NOT negotiate these algorithms but are permitted
to do so solely for backward compatibility. Clients offering
these values MUST list them as the lowest priority (listed after
all other algorithms in SignatureSchemeList). TLS 1.3 servers
MUST NOT offer a SHA-1 signed certificate unless no valid
certificate chain can be produced without it (see
Section 4.4.2.2).
However, we are currently sending the SHA2-based DSA signature schemes
and many SHA1-based schemes, which is in contradiction with the specification.
Because TLS 1.3 support will appear in OpenSSL 1.1, we are bound by
stability requirements to continue to offer the DSA signature schemes
and the deprecated hash algorithms. at least until OpenSSL 1.2.
However, for pure TLS 1.3 clients that do not offer lower TLS versions,
we can be compliant. Do so, and leave a note to revisit the issue when
we are permitted to break with sacred historical tradition.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3326)
Also remove nested OPENSSL_NO_EC conditional; it was properly indented,
but a no-op.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3693)
This used to work but was inadvertently removed as part of the TLSv1.3
work. This adds it back.
Fixes#3633
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3639)
We are quite inconsistent about which alerts get sent. Specifically, these
alerts should be used (normally) in the following circumstances:
SSL_AD_DECODE_ERROR = The peer sent a syntactically incorrect message
SSL_AD_ILLEGAL_PARAMETER = The peer sent a message which was syntactically
correct, but a parameter given is invalid for the context
SSL_AD_HANDSHAKE_FAILURE = The peer's messages were syntactically and
semantically correct, but the parameters provided were unacceptable to us
(e.g. because we do not support the requested parameters)
SSL_AD_INTERNAL_ERROR = We messed up (e.g. malloc failure)
The standards themselves aren't always consistent but I think the above
represents the best interpretation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3480)
Ensure that there are ciphersuites enabled for the maximum supported
version we will accept in a ClientHello.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3316)
ECDHE is not properly defined for SSLv3. Commit fe55c4a2 prevented ECDHE
from being selected in that protocol. However, historically, servers do
still select ECDHE anyway so that commit causes interoperability problems.
Clients that previously worked when talking to an SSLv3 server could now
fail.
This commit introduces an exception which enables a client to continue in
SSLv3 if the server selected ECDHE.
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3204)
Add functions to add/retrieve the certificate_authorities. The older
client_CA functions mainly just call the new versions now.
Rename fields sice new extension can be generated by client and server.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3015)
Fix some comments too
[skip ci]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3069)
that refers to space
deallocated by a call to the free function in tls_decrypt_ticket.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2897)
(cherry picked from commit 13ed1afa92)
Change tls12_sigalg_allowed() so it is passed a SIGALG_LOOKUP parameter,
this avoids multiple lookups.
When we copy signature algorithms return an error if no valid TLS message
signing algorithm is present. For TLS 1.3 this means we need at least one
signature algorithm other than RSA PKCS#1 or SHA1 both of which can only be
used to sign certificates and not TLS messages.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2840)
The certificate types used to be held in a fixed length array or (if
it was too long) a malloced buffer. This was done to retain binary
compatibility. The code can be simplified now SSL is opaque by always
using a malloced buffer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2733)
Set default validity flags if signature algorithms extension
is not present. Preserve flags when checking chains.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2679)
For client auth call tls_choose_sigalg to select the certificate
and signature algorithm. Use the selected algorithm in
tls_construct_cert_verify.
Remove obsolete tls12_get_sigandhash.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2643)
Select appropriate signature algorithm and certificate for client
authentication using tls_choose_sigalg.
A lot of selection logic is very similar except not finding a
certificate is not a fatal error: we just do not present a
certificate.
For TLS 1.2 and earlier we only check the current certificate
is suitable (for compatibility with previous logic) for TLS 1.3
(where there are no compatibility issues) we support multiple
client certificates for different algorithms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2643)
Now the certificate and signature algorithm is set in one place we
can use it directly insetad of recalculating it. The old functions
ssl_get_server_send_pkey() and ssl_get_server_cert_index() are no
longer required.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)
Update tls_choose_sigalg to choose a signature algorithm for all
versions of TLS not just 1.3.
For TLS 1.2 we choose the highest preference signature algorithm
for the chosen ciphersuite.
For TLS 1.1 and earlier the signature algorithm is determined by
the ciphersuite alone. For RSA we use a special MD5+SHA1 signature
algorithm.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)
The original intent of SSL_PKEY_RSA_SIGN and SSL_PKEY_RSA_ENC was to
support two different keys for RSA signing and decrypt. However this
was never implemented and we only ever set one key and the other was
always NULL. Replace with single SSL_PKEY_RSA type.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2587)
When idx is negative (as is the case with do_print_sigalgs in
apps/s_cb.c), AddressSanitizer complains about a buffer overflow (read).
Even if the pointer is not dereferenced, this is undefined behavior.
Change the user not to use "-1" as index since the function is
documented to return 0 on out-of-range values.
Tested with `openssl s_server` and `curl -k https://localhost:4433`.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2349)
New function tls_choose_sigalg(). This is a signature algorithm version
of ssl3_choose_cipher(): it picks and sets the appropriate signature
algorithm and certificate based on shared signature algorithms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)
session_ctx and initial_ctx are aliases of each other, and with the
opaque data structures, there's no need to keep both around. Since
there were more references of session_ctx, replace all instances of
initial_ctx with session_ctx.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2334)
Remove unnecessary lookup operations: use the indices and data in the
lookup table directly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2324)
Use TLS_MAX_SIGALGCNT for the maximum number of entries in the
signature algorithms array.
Use TLS_MAX_SIGSTRING_LEN for the maxiumum length of each signature
component instead of a magic number.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
For TLS 1.2 if we have no signature algorithms extension then lookup
using the complete table instead of (empty) shared signature algorithms
list so we pick up defaults.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
Since every supported signature algorithm is now an entry in the
SIGALG_LOOKUP table we can replace shared signature algortihms with
pointers to constant table entries.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
Add additional entries in the TLS 1.2 signature table to include
the name, sig and hash NID (if any) and required curve (if any).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
Lookup the signature type in the shared list: we can use this to
use PSS if the peer supports it for TLS 1.2.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
Add function to retrieve signature type: in the case of RSA
keys the signature type can be EVP_PKEY_RSA or EVP_PKEY_RSA_PSS.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
Store peer signature type in s->s3->tmp.peer_sigtype and check it
to see if the peer used PSS.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
Extend support for PSS key signatures by using the EVP_PKEY_RSA_PSS type
to distinguish them from PKCS1 signature types.
Allow setting of PSS signature algorithms using the string "PSS" or
"RSA-PSS".
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
Don't attempt to add a TLS1.3 session to a TLS1.2 ClientHello session
ticket extensions. Similarly don't add a TLS1.2 session to a TLS1.3
psk extension.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
The length passed to tls1_set_sigalgs() is a multiple of two and there are
two char entries in the list for each sigalg. When we set
client_sigalgslen or conf_sigalgslen this is the number of ints in the list
where there is one entry per sigalg (i.e. half the length of the list passed
to the function).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
TLSv1.3 introduces PSS based sigalgs. Offering these in a TLSv1.3 client
implies that the client is prepared to accept these sigalgs even in
TLSv1.2.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
In TLSv1.3 we must use PSS based sig algs for RSA signing. Ignore any
shared sig algs which are PKCS1 based.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
The sigalgs work has made some old lookup tables and functions redundant
so remove them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
We had an extra layer of indirection in looking up hashes and sigs based
on sigalgs which is now no longer necessary. This removes it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
In TLSv1.2 an individual sig alg is represented by 1 byte for the hash
and 1 byte for the signature. In TLSv1.3 each sig alg is represented by
two bytes, where the two bytes together represent a single hash and
signature combination. This converts the internal representation of sigalgs
to use a single int for the pair, rather than a pair of bytes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
