Adds a test for using custom EVP_PKEY_METHODs without an ENGINE. As part
of this we also test having a custom EVP_PKEY_METHOD that wraps a built-in
EVP_PKEY_METHOD. We do this for both legacy and provided keys.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16118)
It is possible to have a custom EVP_PKEY_METHOD implementation without
having an engine. In those cases we were failing to use that custom
implementation.
Fixes#16088
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16118)
It is possible to call built-in EVP_PKEY_METHOD functions with a provided
key. For example this might occur if a custom EVP_PKEY_METHOD is in use
that wraps a built-in EVP_PKEY_METHOD. Therefore our EVP_PKEY_METHOD
functions should not assume that we are using a legacy key. Instead we
get the low level key using EVP_PKEY_get0_RSA() or other similar functions.
This "does the right thing" if the key is actually provided.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16118)
The SSL API tests and the passwd command test trigger memory leakage in the
address sanitizer.
Fixes#16116
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16125)
- Make clear the callback is called whenever a peer certificate has been received,
which is independent of the verification mode.
- Make clear that a return value > 1 always leads to handshake failure.
- Make clear that in server mode also return values <= 0 lead to handshake failure.
- For client mode replace the incorrect formulation "if B<SSL_VERIFY_PEER> is set"
by what is actually implemented: "if the verification mode is not B<SSL_VERIFY_NONE>".
- Refer to X509_STORE_CTX_set_error() rather than to internal error variable.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13937)
Test that SSL_key_update() is not allowed if there are writes pending.
Test that there is no reset of the packet pointer in ssl3_setup_read_buffer().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16085)
Word from the lab is:
The use of the derivation function is optional if either an approved
RBG or an entropy source provides full entropy output when entropy
input is requested by the DRBG mechanism. Otherwise, the derivation
function shall be used.
So our disallowing it's use was more than required.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/16096)
The ASN1_STRING_get0_data(3) manual explitely cautions the reader
that the data is not necessarily NUL-terminated, and the function
X509_alias_set1(3) does not sanitize the data passed into it in any
way either, so we must assume the return value from X509_alias_get0(3)
is merely a byte array and not necessarily a string in the sense
of the C language.
I found this bug while writing manual pages for X509_print_ex(3)
and related functions. Theo Buehler <tb@openbsd.org> checked my
patch to fix the same bug in LibreSSL, see
http://cvsweb.openbsd.org/src/lib/libcrypto/asn1/t_x509a.c#rev1.9
As an aside, note that the function still produces incomplete and
misleading results when the data contains a NUL byte in the middle
and that error handling is consistently absent throughout, even
though the function provides an "int" return value obviously intended
to be 1 for success and 0 for failure, and even though this function
is called by another function that also wants to return 1 for success
and 0 for failure and even does so in many of its code paths, though
not in others. But let's stay focussed. Many things would be nice
to have in the wide wild world, but a buffer overflow must not be
allowed to remain in our backyard.
CLA: trivial
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16108)
The number has 8 digits (not 9). It is a single integer `0xMNN00PP0L`.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16106)
Repeat after me:
thou shall not use an auto scope variable as a parameter
that is used out of scope.
Fixes GitHub CI #6305
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/16103)
Various comments referred to s->packet and s->packet_length instead of
s->rlayer.packet and s->rlayer.packet_length. Also fixed is a spot where
RECORD_LAYER_write_pending() should have been used. Based on the review
comments in #16077.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/16086)
Fixes build failures if using enable-ktls in conjunction with --strict-warnings
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16090)
If an application is halfway through writing application data it should
not be allowed to attempt an SSL_key_update() operation. Instead the
SSL_write() operation should be completed.
Fixes#12485
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16077)
Sometimes this function gets called when the buffers have already been
set up. If there is already a partial packet in the read buffer then the
packet pointer will be set to an incorrect value. The packet pointer already
gets reset to the correct value when we first read a packet anyway, so we
don't also need to do it in ssl3_setup_read_buffer.
Fixes#13729
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16077)
Having just enable-acvp-tests without enable-fips does not make
much sense as this just builds the test but it is skipped.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16076)
The flag_allow_md prevents setting a digest in params however
this is unnecessarily strict. If the digest is the same as the
one already set, we do not return an error.
Fixes#16071
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16076)
This is a follow up of 15729bef38. Even
when the host does not support IPv6 at all, BIO_lookup_ex may now
return IN6ADDR_ANY in addition to INADDR_ANY, as the second element of
the ai_next field.
After eee8a40aa5, the do_server function
prefers the IPv6 address and fails on the BIO_socket call. This adds
a fallback code to retry with the IPv4 address returned as the first
element to avoid the error.
The failure had been partially avoided in the previous code with
AI_ADDRCONFIG, because getaddrinfo returns only IPv4 address if no
IPv6 address is associated with external interface. However, it would
be still a problem if the external interface has an IPv6 address
assigned, while the loopback interface doesn't.
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16074)
The implementation of EVP_PKEY_pairwise_check() is also changed
to handle the legacy keys.
Fixes#16046
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16069)
Fall back to stdio functions if not available.
Fixes a daily run-checker failure (no-posix-io)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16073)
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
CLA: trivial
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16060)
nmake is tolerant of those empty lines, but jom isn't. That tolerance
isn't standard make behaviour, so we lean towards avoiding them.
We simply use '@rem' instead.
Fixes#16014
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16048)
Remove the executable attributes of some C code files and key files,
change the file mode from 0755 to 0644.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16045)
By default they are. However, if a provider, provider path or a property query has been specified
they are not. Likewise, if a library context or a property query has been
specified by the command, they are not.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16022)
