The function/macro allow user get groups/extensions without memory allcations.
So we could calculate the ssl fignerprint(ja3) in low cost.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16910)
The struct s->s3 has been modified.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17611)
The var 'thiswr' is an unwanted modification,
it was submitted in #5253.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17610)
The option SSL_OP_NO_EXTENDED_MASTER_SECRET was added in #3910.
And it is valid for versions below (D)TLS 1.2.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17597)
For platforms that do not have native TSAN support, locking needs to be used
instead. This adds the locking.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17489)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17528)
During counting of the unprocessed records, return code is treated in a
wrong way. This forces kTLS RX path to be skipped in case of presence
of unprocessed records.
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17492)
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17412)
In the event that X509_verify() returned an internal error result then
libssl would mishandle this and set rwstate to SSL_RETRY_VERIFY. This
subsequently causes SSL_get_error() to return SSL_ERROR_WANT_RETRY_VERIFY.
That return code is supposed to only ever be returned if an application
is using an app verify callback to complete replace the use of
X509_verify(). Applications may not be written to expect that return code
and could therefore crash (or misbehave in some other way) as a result.
CVE-2021-4044
Reviewed-by: Tomas Mraz <tomas@openssl.org>
We should not be freeing the caller's key in the event of error.
Fixes#17196
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17209)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16925)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17033)
If an async job pauses while processing a TLS connection then the
rwstate gets set to SSL_ASYNC_PAUSED. When resuming the job we should
reset the rwstate back to SSL_NOTHING. In fact we can do this
unconditionally since if we're about to call ASYNC_start_job() then either
we are about to start the async job for the first time (in which case the
rwstate should already by SSL_NOTHING), or we are restarting it after a
pause (in which case reseting it to SSL_NOTHING is the correct action).
Fixes#16809
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17013)
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/16963)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16918)
Normally we expect a client to send new extensions in the ClientHello,
which may be echoed back by the server in subsequent messages. However the
server can also send a new extension in the certificate request message to
be echoed back in a certificate message
Fixes#16632
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16634)
This replaces the AES-128-CBC-HMAC-SHA1 cipher with a
non-encrypting version for use the test suite.
[extended tests]
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16693)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16671)
This is the length of the tag they use and should be considered an upper bound
on their strength.
This lowers their security strength to level 0.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16652)
The TRSCV state abbrev was used for two states:
* TLS_ST_CR_CERT_VRFY
* TLS_ST_SW_CERT_VRFY
The second one is wrong because it's a write operation.
The state for TLS_ST_SW_CERT_VRFY should be "TWSCV"
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16327)
The `sk` variable is assigned to `s->session->peer_chain`.
If `ssl3_digest_cached_records()` were to fail, then `sk` would still be
non-NULL, and subsequently freed on the error return. When the session
is freed, it will then attempt to free `s->session->peer_chain`,
resulting in a double-free (of `sk`).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16309)
This function needs to be power up tested as part of the FIPS validation and
thus it needs to be inside the provider boundary. This is realised by
introducing a new KDF "TLS13-KDF" which does the required massaging of
parameters but is otherwise functionally equivalent to HKDF.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/16203)
Delete dtls timeout dead code in dtls1_handle_timeout
Fix: #15559
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/16151)
Fixes#16142
Add missing session timeout calculation in `ssl_get_new_session()`
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16145)
Various comments referred to s->packet and s->packet_length instead of
s->rlayer.packet and s->rlayer.packet_length. Also fixed is a spot where
RECORD_LAYER_write_pending() should have been used. Based on the review
comments in #16077.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/16086)
If an application is halfway through writing application data it should
not be allowed to attempt an SSL_key_update() operation. Instead the
SSL_write() operation should be completed.
Fixes#12485
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16077)
Sometimes this function gets called when the buffers have already been
set up. If there is already a partial packet in the read buffer then the
packet pointer will be set to an incorrect value. The packet pointer already
gets reset to the correct value when we first read a packet anyway, so we
don't also need to do it in ssl3_setup_read_buffer.
Fixes#13729
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16077)
We received a report of an "excessive message size" for a received
session ticket. Our maximum size was significantly less than the theoretical
maximum. The server may put any data it likes in the session ticket
including (for example) the full certificate chain so we should be able to
handle longer tickets. Update the value to the maximum allowed by the spec.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15877)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15974)
Fixes#15839
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15861)
Since the DH check is used only in DHE-PSK ciphersuites, it's
easy to miss it when updating the RSA mapping. Add cross-references
so that they remain consistent.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15853)
Sort SSL_SESSION structures by timeout in the linked list.
Iterate over the linked list for timeout, stopping when no more
session can be flushed.
Do SSL_SESSION_free() outside of SSL_CTX lock
Update timeout upon use
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8687)
The function dtls1_handle_timeout() calls dtls1_double_timeout() which
was calling dtls1_start_timer(). However dtls1_start_timer() is also
called directly by dtls1_handle_timeout(). We only need to start the timer
once.
Fixes#15561
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15595)
When EVP_MD_CTX_new fails call SSLfatal before the goto err.
This resolves a state machine issue on the out of memory condition.
Fixes#15491.
CLA: trivial
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15520)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
Otherwise, the state machine ends up being in a bad state:
```
SSL routines:write_state_machine:missing fatal:ssl/statem/statem.c:XXX:
```
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/15487)
Parameter "header" of ssl3_cbc_digest_record was fixed to a 13 bytes header
but used as a pointer. This caused a warning about out-of-bounds array access
with GCC 11.
Fixes#15462.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15463)
The new names are ossl_err_load_xxx_strings.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15446)
Add a pass-through switch case for TLS13_AD_MISSING_EXTENSION in
ssl3_alert_code() and tls1_alert_code(), so that the call to
SSLfatal() in final_psk() will always actually generate an alert,
even for non-TLS1.3 protocol versions.
Fixes#15375
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15412)
The initial implementation always deferred the generation of the
requested ticket(s) until the next application write, but this
is not a great fit for what it actually does, architecturally wise.
A request to send a session ticket means entering back into the
handshake state machine (or "in init", as it's known in the
implementation). The state machine transition is not something that
only occurs at an application-data write, and in general could occur at
any time. The only constraint is that we can't enter "init" while in
the middle of writing application data. In such cases we will need to
wait until the next TLS record boundary to enter the state machine,
as is currently done.
However, there is no reason why we cannot enter the handshake state
machine immediately in SSL_new_session_ticket() if there are no
application writes pending. Doing so provides a cleaner API surface to
the application, as then calling SSL_do_handshake() suffices to drive
the actual ticket generation. In the previous state of affairs a dummy
zero-length SSL_write() would be needed to trigger the ticket
generation, which is a logical mismatch in the type of operation being
performed.
This commit should only change whether SSL_do_handshake() vs zero-length
SSL_write() is needed to immediately generate a ticket after the
SSL_new_session_ticket() call -- the default behavior is still to defer
the actual write until there is other application data to write, unless
the application requests otherwise.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14817)
Add -client_renegotiation flag support. The -client_renegotiation flag is
equivalent to SSL_OP_ALLOW_CLIENT_RENEGOTIATION. Add support to the app,
the config code, and the documentation.
Add SSL_OP_ALLOW_CLIENT_RENEGOTIATION to the SSL tests. We don't need to
always enable it, but there are so many tests so this is the easiest thing
to do.
Add a test where client tries to renegotiate and it fails as expected. Add
a test where server tries to renegotiate and it succeeds. The second test
is supported by a new flag, -immediate_renegotiation, which is ignored on
the client.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15184)
It can be useful to know what group was used for the handshake's
key exchange process even on non-TLS 1.3 connections. Allow this
API, new in OpenSSL 3.0.0, to be used on other TLS versions as well.
Since pre-TLS-1.3 key exchange occurs only on full handshakes, this
necessitates adding a field to the SSL_SESSION object to carry the
group information across resumptions. The key exchange group in the
SSL_SESSION can also be relevant in TLS 1.3 when the resumption handshake
uses the "psk_ke" key-exchange mode, so also track whether a fresh key
exchange was done for TLS 1.3.
Since the new field is optional in the ASN.1 sense, there is no need
to increment SSL_SESSION_ASN1_VERSION (which incurs strong incompatibility
churn).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14750)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15230)
Less tersely: converted SSL_get_options, SSL_set_options,
SSL_CTX_get_options and SSL_CTX_get_options to take and return uint64_t
since we were running out of 32 bits.
Fixes: 15145
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15230)
The EVP_PKEY_supports_digest_nid() is renamed to
EVP_PKEY_digestsign_supports_digest() and implemented
via EVP_DigestSignInit_ex().
Fixes#14343
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15198)
TLS 1.3 allows for the "psk_ke" and "psk_dhe_ke" key-exchange modes.
Only the latter mode introduces a new ephemeral (Diffie-Hellman)
key exchange, with the PSK being the only key material used in the
former case.
It's a compliance requirement of RFC 8446 that the server MUST NOT
send a KeyShareEntry when using the "psk_ke" mode, but prior to
this commit we would send a key-share based solely on whether the
client sent one. This bug goes unnoticed in our internal test suite
since openssl communicating with openssl can never negotiate the
PSK-only key-exchange mode. However, we should still be compliant
with the spec, so check whether the DHE mode was offered and don't
send a key-share if it wasn't.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14749)
It's a MUST-level requirement that if the client sends a pre_shared_key
extension not accompanied by a psk_key_exchange_modes extension, the
server must abort the handshake. Prior to this commit the server
would continue on.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14749)
This helps compensating for deprecated functions such as HMAC()
and reduces clutter in the crypto lib, apps, and tests.
Also fixes memory leaks in generate_cookie_callback() of apps/lib/s_cb.c.
and replaces 'B<...>' by 'I<...>' where appropriate in HMAC.pod
Partially fixes#14628.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14664)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15167)
libimplementations.a was a nice idea, but had a few flaws:
1. The idea to have common code in libimplementations.a and FIPS
sensitive helper functions in libfips.a / libnonfips.a didn't
catch on, and we saw full implementation ending up in them instead
and not appearing in libimplementations.a at all.
2. Because more or less ALL algorithm implementations were included
in libimplementations.a (the idea being that the appropriate
objects from it would be selected automatically by the linker when
building the shared libraries), it's very hard to find only the
implementation source that should go into the FIPS module, with
the result that the FIPS checksum mechanism include source files
that it shouldn't
To mitigate, we drop libimplementations.a, but retain the idea of
collecting implementations in static libraries. With that, we not
have:
libfips.a
Includes all implementations that should become part of the FIPS
provider.
liblegacy.a
Includes all implementations that should become part of the legacy
provider.
libdefault.a
Includes all implementations that should become part of the
default and base providers.
With this, libnonfips.a becomes irrelevant and is dropped.
libcommon.a is retained to include common provider code that can be
used uniformly by all providers.
Fixes#15157
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15171)
Removed error codes, and the mention of the functions.
This removal is already documented in the CHANGES doc.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15140)
This option is only useful for the client, but it was previously
marked as only being applicable for servers.
Correct the entry to properly mark it as client-only, and update the
s_server/s_client manuals accordingly.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15127)
Previously we would set SSL_OP_LEGACY_SERVER_CONNECT by default in
SSL_CTX_new(), to allow connections to legacy servers that did not
implement RFC 5746.
It has been more than a decade since RFC 5746 was published, so
there has been plenty of time for implmentation support to roll out.
Change the default behavior to be to require peers to support
secure renegotiation. Existing applications that already cleared
SSL_OP_LEGACY_SERVER_CONNECT will see no behavior change, as
re-clearing the flag is just a little bit of redundant work.
The old behavior is still available by explicitly setting the flag
in the application.
Also remove SSL_OP_LEGACY_SERVER_CONNECT from SSL_OP_ALL, for
similar reasons.
Document the behavior change in CHANGES.md, and update the
SSL_CTX_set_options() and SSL_CONF_cmd manuals to reflect the change
in default behavior.
Fixes: 14848
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15127)
`strdup(propq)` failure is doing a `goto err;` from where `SSL_CTX_free` is called.
The possible call is made before reference and lock fields setup.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/15052)
