This option runs the self tests at installation time. It fails for the 3.1
module.
Also changed the default behaviour to that set by the -self_test_onload
option.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19510)
Fixes openssl#19133
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19370)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19445)
dup_bio_err() can return a BIO chain when 'OPENSSL_SYS_VMS' is defined.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19446)
Fixes openssl#19140
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19372)
Use the normal OPENSSL_NO_ prefix to enable/disable ZLIB
Make `BIO_f_zlib()` always available.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18186)
Mostly revamped from #16712
- fall thru -> fall through
- time stamp -> timestamp
- host name -> hostname
- ipv6 -> IPv6
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19059)
Also, remove inclusions of internal/e_os.h where it seems no longer
necessary.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19330)
This change adds the 'C' command character to allow a user to drop the
current session and reconnect to the server. It has the same behavior as
the `-reconnect` option except this allows reconnect to be triggered at
an arbitrary point in the session.
The primary use case for this change is to provide a way for the user to
probe a server for TLS1.3 session resumption support. This is not
currently reliably supported by the `-reconnect` option.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18683)
Lock the buffers used for throughput measurements into memory. This removes
some side effects of paging.
Errors from the memory locking functions are ignored since they are not
critical to the application.
This feature is limited to Linux and Windows.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19091)
Also add related references to FR #15725.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18900)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18900)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19234)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19179)
`__STRICT_ANSI__` is a gnuish flag macro that indicates if `-ansi`
was given on the command line. To check the C version, it's better
to check the macro `__STDC_VERSION__`.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/19197)
CLA: trivial
Signed-off-by: a1346054 <36859588+a1346054@users.noreply.github.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19173)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18434)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18434)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18434)
In multi-mode, speed fork()s off several children but does not wait for them.
On Linux, this leads to wrong accounting information of getrusage used by
tools to extract running time and page faults.
Wait for every children and check the return code and termination signal.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19093)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18675)
...because it uses md5 for HMAC tests. Skip md5 in case of its
unavailability.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17331)
Fixes#18586
In order to not break existing applications the OpenSSL documentation
related to SHAKE has been updated.
Background:
All digests algorithms (including XOF's) use the bitlen as the default output length.
This results in a security strength of bitlen / 2.
This means that SHAKE128 will by default have an output length of 16
bytes and a security strength of 64 bits.
For SHAKE256 the default output length is 32 bytes and has a security
strength of 128 bits.
This behaviour was present in 1.1.1 and has been duplicated in the
provider SHAKE algorithms for 3.0.
The SHAKE XOF algorithms have a security strength of
min(bitlen, output xof length in bits / 2).
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18622)
The -provider and -propquery options did not work on genrsa. Fix this
and add a test that checks that operations that would usually fail with
the FIPS provider work when run with
| -provider default -propquery '?fips!=yes'
See also 30b2c3592e, which previously
fixed the same problem in dsaparam and gendsa. See also the initial
report in https://bugzilla.redhat.com/show_bug.cgi?id=2094956.
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/18717)
The -provider and -propquery options did not work on dgst when using it
for signing or signature verification (including HMACs). Fix this and
add tests that check that operations that would usually fail with the
FIPS provider work when run with
| -provider default -propquery '?fips!=yes'
Additionally, modify the behavior of dgst -list to also use the current
library context and property query. This reduces the output below the
headline "Supported digests" to a list of the digest algorithms that
will actually work with the current configuration, which is closer to
what users probably expect with this headline.
See also 30b2c3592e, which previously
fixed the same problem in dsaparam and gendsa. See also the initial
report in https://bugzilla.redhat.com/show_bug.cgi?id=2094956.
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/18717)
The -provider and -propquery options did not work on pkeyparam. Fix this
and add tests that check that operations that would usually fail with
the FIPS provider work when run with
| -provider default -propquery '?fips!=yes'
See also 30b2c3592e, which previously
fixed the same problem in dsaparam and gendsa. See also the initial
report in https://bugzilla.redhat.com/show_bug.cgi?id=2094956.
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/18717)
The -provider and -propquery options did not work on ecparam. Fix this
and add tests that check that operations that would usually fail with
the FIPS provider work when run with
| -provider default -propquery '?fips!=yes'
See also 30b2c3592e, which previously
fixed the same problem in dsaparam and gendsa. See also the initial
report in https://bugzilla.redhat.com/show_bug.cgi?id=2094956.
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/18717)
The -provider and -propquery options did not work on dhparam. Fix this
and add tests that check that operations that would usually fail with
the FIPS provider work when run with
| -provider default -propquery '?fips!=yes'
See also 30b2c3592e, which previously
fixed the same problem in dsaparam and gendsa. See also the initial
report in https://bugzilla.redhat.com/show_bug.cgi?id=2094956.
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/18717)
The default that pkcs12 -export uses is SHA256 and not SHA1.
CLA: Trivial
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18904)
Fixes#16721
This uses AES-ECB to create a counter mode AES-CTR32 (32bit counter, I could
not get AES-CTR to work as-is), and GHASH to implement POLYVAL. Optimally,
there would be separate polyval assembly implementation(s), but the only one
I could find (and it was SSE2 x86_64 code) was not Apache 2.0 licensed.
This implementation lives only in the default provider; there is no legacy
implementation.
The code offered in #16721 is not used; that implementation sits on top of
OpenSSL, this one is embedded inside OpenSSL.
Full test vectors from RFC8452 are included, except the 0 length plaintext;
that is not supported; and I'm not sure it's worthwhile to do so.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18693)
Also change ossl_cmp_ctx_set0_validatedSrvCert() to ossl_cmp_ctx_set1_validatedSrvCert(),
and add respective tests as well as the -srvcertout CLI option using the new function.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18656)
We need to check that error cert is available before printing its data
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18805)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18373)
Also improve openssl-x509.pod.in and error handling of load_serial() in apps.c.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18373)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18373)
Prevent crashes on error by making sure the info is freed after OSSL_CMP_CTX_free(),
which may call OSSL_HTTP_close() and thus indirectly reference the info.
Moreover, should not attempt to reference the cmp_ctx variable when NULL.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18702)
The existing help text says:
> -badsig Corrupt last byte of loaded OSCP response signature (for test)
but this should be OCSP. This is the only occurrence within the project
of this typo.
CLA: trivial
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18684)
This happens if use_ssl is not set but an SSL_CTX is provided.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18674)
