This is not done absolutely everywhere, as there are places where
the use of ERR_add_error_data() is quite complex, but at least the
simple cases are done.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13318)
This includes error reporting for libcrypto sub-libraries in surprising
places.
This was done using util/err-to-raise
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13318)
Loading the various built-in engines was unconditionally clearing the
whole error stack. During config file processing processing a .include
directive which fails results in errors being added to the stack - but
we carry on anyway. These errors were then later being removed by the
engine loading code, meaning that problems with the .include directive
never get shown.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13311)
... and only *define* them in the source files that need them.
Use DEFINE_OR_DECLARE which is set appropriately for internal builds
and not non-deprecated builds.
Deprecate stack-of-block
Better documentation
Move some ASN1 struct typedefs to types.h
Update ParseC to handle this. Most of all, ParseC needed to be more
consistent. The handlers are "recursive", in so far that they are called
again and again until they terminate, which depends entirely on what the
"massager" returns. There's a comment at the beginning of ParseC that
explains how that works. {Richard Levtte}
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10669)
Fixes#11510
PR #11240 Added support for passing the libctx to the config loader.
As part of this work the call to OPENSSL_load_builtin_modules() + ENGINE_load_builtin_engines() was deferred until module_run() is called.
The call to ENGINE_load_builtin_engines() has been added to ENGINE_by_id().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11543)
Use of the low level RC4 functions has been informally discouraged for a long
time. We now formally deprecate them.
Applications should instead use the EVP APIs, e.g. EVP_EncryptInit_ex,
EVP_EncryptUpdate, EVP_EncryptFinal_ex and the equivalently named decrypt
functions.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10834)
Also added blanks lines after declarations in a couple of places.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9916)
Make the include guards consistent by renaming them systematically according
to the naming conventions below
For the public header files (in the 'include/openssl' directory), the guard
names try to match the path specified in the include directives, with
all letters converted to upper case and '/' and '.' replaced by '_'. For the
private header files files, an extra 'OSSL_' is added as prefix.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
Currently, there are two different directories which contain internal
header files of libcrypto which are meant to be shared internally:
While header files in 'include/internal' are intended to be shared
between libcrypto and libssl, the files in 'crypto/include/internal'
are intended to be shared inside libcrypto only.
To make things complicated, the include search path is set up in such
a way that the directive #include "internal/file.h" could refer to
a file in either of these two directoroes. This makes it necessary
in some cases to add a '_int.h' suffix to some files to resolve this
ambiguity:
#include "internal/file.h" # located in 'include/internal'
#include "internal/file_int.h" # located in 'crypto/include/internal'
This commit moves the private crypto headers from
'crypto/include/internal' to 'include/crypto'
As a result, the include directives become unambiguous
#include "internal/file.h" # located in 'include/internal'
#include "crypto/file.h" # located in 'include/crypto'
hence the superfluous '_int.h' suffixes can be stripped.
The files 'store_int.h' and 'store.h' need to be treated specially;
they are joined into a single file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
The output C code was made to use ERR_func_error_string() to see if a
string table was already loaded or not. Since this function returns
NULL always, this check became useless.
Change it to use ERR_reason_error_string() instead, as there's no
reason to believe we will get rid of reason strings, ever.
To top it off, we rebuild all affected C sources.
Fixes#9756
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9756)
Use the header file internal/cryptlib.h instead.
Remove checks for OPENSSL_NO_ASM and I386_ONLY
in cryptlib.c, to match the checks in other
places where OPENSSL_ia32cap_P is used and
assumed to be initialized.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/9688)
When OpenSSL is configured with 'no-stdio', TEST_ENG_OPENSSL_RC4_P_INIT
shouldn't be defined, as that test uses stdio.
Fixes#9597
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9598)
Previously we only loaded the config file by default for libssl. Now we do
it for libcrypto too.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9492)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9417)
Additionally, merge ENGINE_CONF into CONF.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8680)
Engine has been moved from crypto/engine/eng_devcrypto.c to
engines/e_devcrypto.c.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7859)
Trim trailing whitespace. It doesn't match OpenSSL coding standards,
AFAICT, and it can cause problems with git tooling.
Trailing whitespace remains in test data and external source.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8092)
FreeBSD does not enable cryptodev(4) by default. OpenBSD disabled support
for /dev/crypto by default from 4.9 and removed it from 5.7. Now the engine
is properly enabled by default on BSD platforms (see #7885), it continuously
complains:
Could not open /dev/crypto: No such file or directory
Hide the nagging error message behind ENGINE_DEVCRYPTO_DEBUG.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7896)
This is useful to determine the kernel driver running each algorithm.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
USE_SOFTDRIVERS: whether to use software (not accelerated) drivers
CIPHERS: list of ciphers to enable
DIGESTS: list of digests to enable
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
Since each ioctl causes a context switch, slowing things down, if
EVP_MD_CTX_FLAG_ONESHOT is set, then:
- call the ioctl in digest_update, saving the result; and
- just copy the result in digest_final, instead of using another ioctl.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
Digest must be able to do partial-state copy to be used.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
Make CTR mode behave like a stream cipher.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
The engine needs a custom cipher context copy function to open a new
/dev/crypto session.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
Close the session in digest_cleanup instead of digest_final. A failure
in closing the session does not mean a previous successful digest final
has failed as well.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
If the source ctx has not been initialized, don't initialize the copy
either.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
Return failure when the digest_ctx is null in digest_update and
digest_final, and when md is null in digest_final.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
Call functions to prepare methods after confirming that /dev/crytpo was
sucessfully open and that the destroy function has been set.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
