Need to update the docker interop container to use the quic-hq-interop
client so that the right alpn is negotiated for chacha20 testing
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25528)
To run the chacha20 test in interop we need to:
1) negotiate an hq-interop alpn
2) only use chacha 20
Item 1 requires the use of quic-hq-interop, the latter requires this
change
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25528)
provider.
Revert changes to m_sigver.c related to #ifdef FIPS_MODULE and exclude
the file using build.info instead.
Also exclude these calls inside EVP_DigestUpdate() within the FIPS
provider since this API should only be used for self testing digests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25570)
This keeps the code consistent with the changes done for other
algorithms that support sigalg_set_ctx_params().
set_ctx_params() should always return 1 if the parameter is unknown.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25570)
Self tests no longer use the EVP_DigestSign/Verify API's.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25570)
The arguments of the `nc_match_single` function have different names
in the declaration and definition or are mixed up in places.
CLA: trivial
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25592)
fortify-headers are broken due to this warning.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25599)
If it's not conditional in the same manner as the other steps, it fails
because the artifacts aren't present => job failure.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25584)
After rudimentary analysis, it appears the below functions can
potentially produce output, whilst the provider is in error state.
These functions were detected using this method:
```
CFLAGS='-save-temps' ./Configure enable-fips --debug
make -j10
find . -name '*.i' | xargs git add -f
git grep --cached -p ossl_prov_is_running | grep libfips-lib > ossl_prov_is_running.txt
git grep --cached -p 'return' | grep libfips-lib > return.txt
grep '\.i=' return.txt > func-with_return.txt
grep '\.i=' ossl_prov_is_running.txt > func-with-ossl_prov_is_running.txt
grep --fixed-strings --line-regexp --file=func-with-ossl_prov_is_running.txt return.txt > func-without-ossl_prov_is_running.txt
grep -e newctx -e initctx -e dupctx func-without-ossl_prov_is_running.txt | grep -v ossl_prov_is_running
```
And from there doing manual inspection, as the list was short at that
point.
As in compile with keeping pre-processed source code; and use `git
grep --cached -p` to find these preprocessed files, and scan for calls
to return or opssl_prov_is_running, with function name printed. And
then exclude one from the other, to hopefully get a list of all the
functions that do not check for ossl_prov_is_running.
As number of functions without "func-without-ossl_prov_is_running"
check is large, I do wonder which other functions are "interesting" to
check for. I think I'm not scanning for _update functions
correctly. Any tips on improving above analysis will help with
maintaining such checks going forward.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25580)
In this function the salt can be either a zero buffer of exactly mdlen
length, or an arbitrary salt of prevsecretlen length.
Although in practice OpenSSL will always pass in a salt of mdlen size
bytes in the current TLS 1.3 code, the openssl kdf command can pass in
arbitrary values (I did it for testing), and a future change in the
higher layer code could also result in unmatched lengths.
If prevsecretlen is > mdlen this will cause incorrect salt expansion, if
prevsecretlen < mdlen this could cause a crash or reading random
information. Inboth case the generated output would be incorrect.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25579)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25583)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25583)
These were added in #25548 but didn't include a FIPS version check which
causes failures testing older FIPS providers against later versions.
Also change some skips to use TEST_skip.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25582)
The code was not detecting that the cofactor was set up correctly
if OSSL_PKEY_PARAM_USE_COFACTOR_ECDH was set, resulting in an incorrect
FIPS indicator error being triggered.
Added a test for all possible combinations of a EVP_PKEY setting
OSSL_PKEY_PARAM_USE_COFACTOR_ECDH and the derive context setting
OSSL_EXCHANGE_PARAM_EC_ECDH_COFACTOR_MODE.
This only affects the B & K curves (which have a cofactor that is not 1).
Bug reported by @abkarcher
Testing this properly, also detected a memory leak of privk when the
FIPS indicator error was triggered (in the case where mode = 0 and
use_cofactor was 1).
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25548)
Similar to other KDFs, the input key should be 112 bits long.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25529)
Document new command line options added in 3.4.0
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25546)
Document new command line options added in 3.2.0
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25546)
Document new command line options added in 3.1.0
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25546)
Documents when the command was added.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25546)
See Section 5 Key Agreement Using Diffie-Hellman and MQV of
[NIST SP 800-131Ar2](https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-131Ar2.pdf).
Strengths less than 112bits is disallowed, thus eliminating SHA1.
Skip cms test case that requires use of SHA1 with X9.42 DH.
Rename ossl_fips_ind_digest_check to ossl_fips_ind_digest_exch_check
Add myself to Changes for fips indicator work
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/25517)
Use non-usual params of pkcs11 module will trigger a null ptr deref bug. Fix it for #25493
CLA: trivial
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25496)
The quic implementation defined a set of LIST_* macros for list
manipulation, which conflicts with the generally support BSD api found
in the queue.h system header. While this isn't normally a problem, A
report arrived indicating that MacOSX appears to implicitly include
queue.h from another system header which causes definition conflicts.
As the openssl macros are internal only, it seems the most sensible
thing to do is place them in a well known namespace for our library to
avoid the conflict, so add an OSSL_ prefix to all our macros
Fixes#25516
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Saša Nedvědický <sashan@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/25519)
Force the use of the derivation function when creating OpenSSL's internal
DRBGs.
FIPS mandates the use of a derivation function, so 3.4 cannot be validated as
it stands which run counter to the indicator work that was included.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Hugo Landau <hlandau@devever.net>
(Merged from https://github.com/openssl/openssl/pull/25511)
(cherry picked from commit 0ab796ef96)
issuer passed as second parameter to check_issued may result in
NULL dereference
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@devever.net>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24760)
Fixes#8331: Updated the description for setting the tag length in OCB mode to remove the misleading “when encrypting” and “during encryption” phrasing. This change emphasizes that setting a custom tag length requires a call with NULL, applicable to both encryption and decryption contexts.
Reviewed-by: Frederik Wedel-Heinen <fwh.openssl@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25424)
Some of the BE specific permutes were incorrect. Fix them.
This passes all tests on a P10/ppc64 debian unstable host.
Fixes#25451
CLA: trivial
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25483)
