Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21459)
QUIC depends on TLSv1.3, so if the latter is disabled then we must do
the same for QUIC.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21332)
Ensure builds enable QUIC without explicitly having to ask for it. To
disable QUIC pass "no-quic" to Configure.
As a result we can remove all use of "enable-quic" from the various CI
runs.
We also add a CHANGES and NEWS entry for QUIC support.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21332)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21212)
This can effectively reduce the binary size for platforms
that don't need ECX feature(~100KB).
Signed-off-by: Yi Li <yi1.li@intel.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20781)
The DEPEND statement, when applied on files generated with GENERATE, may
be used to specify script modules that the template to be generated from
depends on. In short, this sort of depend:
DEPEND[generated]=util/perl/OpenSSL/something.pm
... would generate a perl run that has the inclusion directory
'util/perl/OpenSSL' and 'something' as the module to be loaded. However,
the package name for this module is 'OpenSSL::something', so to load it the
way it's expected, the inclusion directory should be 'util/perl', and the
module to be loaded should be specified as 'OpenSSL/something' (to be
massaged into a proper module name by the build file template).
To allow this, we introduce a file syntax, where a single '|' is used as a
directory separator, to delineate what part should be used as the inclustion
directory, and which part the module name to be loaded should be derived
from:
DEPEND[generated]=util/perl|OpenSSL/something.pm
Fixes#21112
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21117)
This allows additional command line options to be passed to the assembler.
For example:
Configure VC-WIN64A ASFLAGS=--reproducible
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20813)
If the user specifies an alternative build file than the default, this
alternative is recorded in $config{build_file}, not $target{build_file}.
Therefore, the former should be used, leaving the latter as a mere default.
This is a bug. While fixing it, document it better too.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20173)
This disables -Wtype-limits /
-Wtautological-constant-out-of-range-compare. Since it generates
warnings for valid and reasonable code, IMO this actually encourages
people to write worse code.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19703)
Use the normal OPENSSL_NO_ prefix to enable/disable ZLIB
Make `BIO_f_zlib()` always available.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18186)
Some primitives are designed to be used in a multi-threaded environment,
if supported, e.g., Argon2.
This patch adds support for preemptive threading and basic synchronization
primitives for platforms compliant with POSIX threads or Windows CRT.
Native functions are wrapped to provide a common (internal) API.
Threading support can be disabled at compile time. If enabled, threading
is disabled by default and needs to be explicitly enabled by the user.
Thread enablement requires an explicit limit on the number of threads that
OpenSSL may spawn (non-negative integer/infinity). The limit may be changed.
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12255)
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12255)
This partially reverts Github PR #16378:
commit 764cf5b263, titled "Configuration:
only produce a new configdata.pm if it has changed contents"
Unfortunately, the attempt to make configuration leaner didn't take
into account all the files that may or may not affect the outcome of
`configdata.pm`, and most of all, didn't take into account that `Makefile`
has clauses of its own to determined when a reconfiguration is needed, all
based on time stamps.
Something as simple as a changed `Configurations/10-main.conf`, where the
change doesn't affect the resulting `configdata.pm` gets `make` into a
reconfiguration loop, because `configdata.pm` is older than `10-main.conf`.
The lesson to remember is not to try to outsmart `make` in cases like this.
We retain the other parts of the PR mentioned, as they are still valid.
needed to be taken into account (all the Configurations/*.conf
as well as all the build.info)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/18832)
The FIPS module checksum needs to know that configuration.h is
generated from configuration.h.in, so that information is conserved.
To make this possible, it's now possible to have attributes with the
GENERATE keyword, and the attribute "skip" is added to make a keyword
a no-op, which makes it informative only.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/16378)
The goal is to avoid having too much of the OpenSSL source rebuilt
because include/openssl/configuration.h, or even because it was a
Makefile target that was called upon (some make implementations
consider the use of a target as an update of that target, even if it
wasn't really updated).
To resolve this, we move the production of include/openssl/configuration.h
to configdata.pm, and only update it if there were any actual changes.
Fixes#16377
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/16378)
The goal is to avoid having too much of the OpenSSL source rebuilt
because configdata.pm got a new time stamp. The conditions for
updating configdata.pm are now:
1. its time stamp is older than Configure's, or...
2. its contents has changed.
Fixes#16377
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/16378)
If the afalgeng is enabled then Configure tries to be clever but fails,
by only actually building afalgeng if it isn't being cross-compiled and
if the current kernel is 4.1+.
This means that everyone cross compiling, or whose builder machines are
running older kernels (not uncommon for build farms), can't enable
afalgeng.
Instead remove the cleverness and simply enable/disable as requested.
Fixes#7687
CLA: trivial
Signed-off-by: Ross Burton <ross.burton@arm.com>
Change-Id: I023b6cb535d5b5811823d4814fa939de3f304886
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7688)
Supports Linux, MacOS and FreeBSD
Disabled by default, enabled via `enabled-tfo`
Some tests
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8692)
* Evaluating code-refs in Configure can sometimes set the default
variable `$_`
* Prevent spillage influencing the target property by using named
variable in loop
CLA: trivial
Fixes gh-17321
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17322)
OpenSSL assumes AT_HWCAP = 16 (as on Linux), but on FreeBSD AT_HWCAP = 25
Switch to using AT_HWCAP, and setting it to 16 if it is not defined.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17090)
And document the -w option
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16325)
This was allowed already for some statements, but not consistently for all.
Fixes#15684
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15691)
There doesn't appear to be a good reason to omit protocol message tracing by default.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15665)
Internal documentation doesn't allow for any exception... Therefore,
even GENERATE values should be variable expanded.
(there are historical reasons why GENERATE was excepted from variable
expansion, that aren't applicable any more)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15554)
Remove unused -DCONF_DEBUG and -DBN_CTX_DEBUG.
Rename REF_PRINT to REF_DEBUG for consistency, and add a new
tracing category and use it for printing reference counts.
Rename -DDEBUG_UNUSED to -DUNUSED_RESULT_DEBUG
Fix BN_DEBUG_RAND so it compiles and, when set, force DEBUG_RAND to
be set also.
Rename engine_debug_ref to be ENGINE_REF_PRINT also for consistency.
Fixes#15357
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15353)
Pull in Todd Short's fix cfd7225fbb from 1.1.1, which moves the disabling
of pic, threads and statics to before they are checked.
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15214)
Don't die if someone says "fips" instead of "enable-fips"
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15346)
The memory footprint of how we produced the Makefile was quite...
important, because we have all the processing in one perl snippet, and
generate the details of the build file by appending to the "magic"
variable $OUT. The result is that this variable gets to hold the
majority of the build file text, and depending on memory reallocation
strategies for strings, the heap may hold multiple (possibly not just
a few) copies of this string, almost all of them "freed" but still
taking up space. This has resulted in memory exhaustion.
We therefore change strategy, and generate the build file in two
phases, where the first phase generates the full template using small
perl snippets for each detail, and the second phase processes this
template. This is much kinder to process memory.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15310)
Use it in the automated workflows.
Fixes: #15247
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15248)
A pair of the disabled string checks were incorrect.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15082)
Building the fips provider in addition to the default provider
effectively doubles the build time. Since many users will not
need fips support, it is now disabled by default.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13684)
