These functions are prerequisites for implementing EVP_PKEY_todata().
OSSL_PARAM_dup() is required to make a deep copy of the exported
params (since the provider export() uses a OSSL_PARAM_BLD which throws away the
data after the call), and then use OSSL_PARAM_merge() to add some additional params
that can be passed to the EVP_PKEY_todata().
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14785)
It turns out that some CPUID code requires the presence of some BN
assembler code, so we make sure it's included in the same manner as
the CPUID code itself.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14755)
We were using CPUID coded in several modules, but it was unclear how
it actually got there, and could fail randomly.
To remedy that, this change separates the CPUID C code from the rest
of cryptlib.c, and ensures the right modules get both that and the
assembler sources explicitly.
Fixes#11281
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14755)
Some private libcrypto symbols are also included in legacy.so.
Unfortunately this included some files with "RUN_ONCE" functions and
global data. This doesn't get properly cleaned up when OpenSSL exits.
Therefore we are more selective about the symbols we include in legacy.so.
Fixes#13560
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14646)
Make OPENSSL_fork_prepare() et al always available even in a no-threads
build. These functions are no-ops anyway so this shouldn't make any
difference.
This fixes an issue where the symbol_presence test fails in a no-threads
build. This is because these functions have not been marked in
libcrypto.num as being dependent on thread support. Enclosing the
declarations of the functions in the header with an appropriate guard
does not help because we never define OPENSSL_NO_THREADS (we define the
opposite OPENSSL_THREADS). This confuses the scripts which only consider
OPENSSL_NO_* guards. The simplest solution is to just make them always
available.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13647)
The pass phrase prompter that's part of OSSL_ENCODER and OSSL_DECODER
is really a passphrase callback bridge between the diverse forms of
prompters that exist within OpenSSL: pem_password_cb, ui_method and
OSSL_PASSPHRASE_CALLBACK.
This can be generalised, to be re-used by other parts of OpenSSL, and
to thereby allow the users to specify whatever form of pass phrase
callback they need, while being able to pass that on to other APIs
that are called internally, in the form that those APIs demand.
Additionally, we throw in the possibility to cache pass phrases during
a "session" (we leave it to each API to define what a "session" is).
This is useful for any API that implements discovery and therefore may
need to get the same password more than once, such as OSSL_DECODER and
OSSL_STORE.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12512)
For those files, the dependence on configdata.pm is automatic, adding
it explicitly only results in having that dependency twice.
Fixes#11786
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11790)
Just as for the FIPS module, there's code in the legacy module that need
this.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11504)
This library is meant to be small and quick. It's based on WPACKET,
which was extended to support DER writing. The way it's used is a
bit unusual, as it's used to write the structures backward into a
given buffer. A typical quick call looks like this:
/*
* Fill in this structure:
*
* something ::= SEQUENCE {
* id OBJECT IDENTIFIER,
* x [0] INTEGER OPTIONAL,
* y [1] BOOLEAN OPTIONAL,
* n INTEGER
* }
*/
unsigned char buf[nnnn], *p = NULL;
size_t encoded_len = 0;
WPACKET pkt;
int ok;
ok = WPACKET_init_der(&pkt, buf, sizeof(buf)
&& DER_w_start_sequence(&pkt, -1)
&& DER_w_bn(&pkt, -1, bn)
&& DER_w_boolean(&pkt, 1, bool)
&& DER_w_precompiled(&pkt, -1, OID, sizeof(OID))
&& DER_w_end_sequence(&pkt, -1)
&& WPACKET_finish(&pkt)
&& WPACKET_get_total_written(&pkt, &encoded_len)
&& (p = WPACKET_get_curr(&pkt)) != NULL;
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11450)
Currently only RSA, EC and ECX are supported (DH and DSA need to be added to the keygen
PR's seperately because the fields supported have changed significantly).
The API's require the keys to be provider based.
Made the keymanagement export and get_params functions share the same code by supplying
support functions that work for both a OSSL_PARAM_BLD as well as a OSSL_PARAM[].
This approach means that complex code is not required to build an
empty OSSL_PARAM[] with the correct sized fields before then doing a second
pass to populate the array.
The RSA factor arrays have been changed to use unique key names to simplify the interface
needed by the user.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11365)
The new client has become an independent libcrpyto module in crypto/http/ and
* can handle any types of requests and responses (ASN.1-encoded and plain)
* does not include potentially busy loops when waiting for responses but
* makes use of a new timeout mechanism integrated with socket-based BIO
* supports the use of HTTP proxies and TLS, including HTTPS over proxies
* supports HTTP redirection via codes 301 and 302 for GET requests
* returns more useful diagnostics in various error situations
Also adapts - and strongly simplifies - hitherto uses of HTTP in crypto/ocsp/,
crypto/x509/x_all.c, apps/lib/apps.c, and apps/{ocsp,s_client,s_server}.c
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/10667)
This is required in order to share code for FIPS related parameter generation and validation routinues.
Note the 'counter' field is now stored as a integer (as that is the form required for generation/validation functions).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10860)
Added an API to optionally set a self test callback.
The callback has the following 2 purposes
(1) Output information about the KAT tests.
(2) Allow the ability to corrupt one of the KAT's
The fipsinstall program uses the API.
Some KATS are not included in this PR since the required functionality did not yet exist in the provider.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10374)
Fixes#8322
The leak-checking (and backtrace option, on some platforms) provided
by crypto-mdebug and crypto-mdebug-backtrace have been mostly neutered;
only the "make malloc fail" capability remains. OpenSSL recommends using
the compiler's leak-detection instead.
The OPENSSL_DEBUG_MEMORY environment variable is no longer used.
CRYPTO_mem_ctrl(), CRYPTO_set_mem_debug(), CRYPTO_mem_leaks(),
CRYPTO_mem_leaks_fp() and CRYPTO_mem_leaks_cb() return a failure code.
CRYPTO_mem_debug_{malloc,realloc,free}() have been removed. All of the
above are now deprecated.
Merge (now really small) mem_dbg.c into mem.c
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10572)
Serialization is needed to be able to take a provider object (such as
the provider side key data) and output it in PEM form, DER form, text
form (for display), and possibly other future forms (XML? JSON? JWK?)
The idea is that a serializer should be able to handle objects it has
intimate knowledge of, as well as object data in OSSL_PARAM form. The
latter will allow libcrypto to serialize some object with a different
provider than the one holding the data, if exporting of that data is
allowed and there is a serializer that can handle it.
We will provide serializers for the types of objects we know about,
which should be useful together with any other provider that provides
implementations of the same type of object.
Serializers are selected by method name and a couple of additional
properties:
- format used to tell what format the output should be in.
Possibilities could include "format=text",
"format=pem", "format=der", "format=pem-pkcs1"
(traditional), "format=der-pkcs1" (traditional)
- type used to tell exactly what type of data should be
output, for example "type=public" (the public part of
a key), "type=private" (the private part of a key),
"type=domainparams" (domain parameters).
This also adds a passphrase callback function type,
OSSL_PASSPHRASE_CALLBACK, which is a bit like OSSL_CALLBACK, but it
takes a few extra arguments to place the result in.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10394)
This leaves minimal implementations of EVP_blake2b512 and EVP_blake2s256,
that are now only there to provide a name for implicit fetches.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9075)
Implementations are now spread across several libraries, so the assembler
related defines need to be applied to all affected libraries and modules.
AES_ASM define was missing from libimplementations.a which disabled AESNI
aarch64 changes were made by xkqian.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10180)
We put almost everything in these internal static libraries:
libcommon Block building code that can be used by all
our implementations, legacy and non-legacy
alike.
libimplementations All non-legacy algorithm implementations and
only them. All the code that ends up here is
agnostic to the definitions of FIPS_MODE.
liblegacy All legacy implementations.
libnonfips Support code for the algorithm implementations.
Built with FIPS_MODE undefined. Any code that
checks that FIPS_MODE isn't defined must end
up in this library.
libfips Support code for the algorithm implementations.
Built with FIPS_MODE defined. Any code that
checks that FIPS_MODE is defined must end up
in this library.
The FIPS provider module is built from providers/fips/*.c and linked
with libimplementations, libcommon and libfips.
The Legacy provider module is built from providers/legacy/*.c and
linked with liblegacy, libcommon and libcrypto.
If module building is disabled, the object files from liblegacy and
libcommon are added to libcrypto and the Legacy provider becomes a
built-in provider.
The Default provider module is built-in, so it ends up being linked
with libimplementations, libcommon and libnonfips. For libcrypto in
form of static library, the object files from those other libraries
are simply being added to libcrypto.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10088)
The issue was encountered when testing parallel builds of OpenSSL on
Windows using `jom` instead of `nmake`. The builds persistently failed
with the following error message because the generated file "buildinf.h"
did not exist yet.
crypto\info.c(15): fatal error C1083:
cannot open include file: "buildinf.h": No such file or directory
Apparently this error does not occur on Linux because `make` parallelizes
the builds differently such that `crypto\cversion.c`, which has an
explicit dependency on `buildinf.h`, gets compiled first. Also, the
include dependency was added only recently in commit 096978f099.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9960)
Since the arguments are now generated in the build file templates,
they should be removed from the build.info files.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9884)
Instead of using evp_keccak_kmac128() and evp_keccak_kmac256(), we refer
to the hash implementation by name, and fetch it, which should get us the
implementation from providers/common/digests/sha3_prov.c.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8877)
These are utility functions that can be used to replace calls to
ctrl_str type functions with get_params / set_params types of calls.
They work by translating text values to something more suitable for
OSSL_PARAM, and by interpretting parameter keys in a compatible
fashion.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9303)
The core provides a number of essential functions as "upcalls" to
providers. Some of those were just utility functions that wrap other
upcalls - which don't seem essential and bloat the interface. We should
remove them in order to simplify the interface.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9432)
This function is used to traverse all the implementations provided by
one provider, or all implementation for a specific operation across
all loaded providers, or both, and execute a given function for each
occurence.
This will be used by ossl_method_construct(), but also by information
processing functions.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9356)
A fuller implementation of PARAMS_TEMPLATE as per #9266 but renamed.
This introduces a statis data type which can be used to constructor a
description of a parameter array. It can then be converted into a OSSL_PARAM
array and the allocated storage freed by a single call to OPENSSL_free.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9305)
Adds simple utility functions to allow both the default and fips providers to
encode and decode DSA-Sig-Value and ECDSA-Sig-Value (DSA_SIG and ECDSA_SIG
structures) to/from ASN.1 DER without requiring those providers to have a
dependency on the asn1 module.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9111)
Also make OPENSSL_hexstr2buf available to providers.
EVP control functions need hexstring conversion, so move any
memory-allocating functions in o_str.c into new file mem_str.c
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8886)
The RAND code needs to know about threads stopping in order to cleanup
local thread data. Therefore we add a callback for libcrypto to tell
providers about such events.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)
Also took away the internal 'debug-linux-ia32-aes' config target, as
it's broken (refers to files that no longer exist).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)
This file information was hidden in config target files, when they
should really be part of build.info like any other file we build
from. With build.info variables, the task became much easier.
We take the opportunity to move apps_init_src and apps_aux_src to
apps/build.info as well, and to clean up apps/build.info.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)
There are various C macro definitions that are passed via the compiler
to enable AES assembler optimisation. We need to make sure that these
defines are also passed during compilation of the FIPS module.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9038)
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712)
CMP and CRMF API is added to libcrypto, and the "cmp" app to the openssl CLI.
Adds extensive man pages and tests. Integration into build scripts.
Incremental pull request based on OpenSSL commit 1362190b1b of 2018-09-26
3rd chunk: CMP ASN.1 structures (in crypto/cmp/cmp_asn.c) and related files
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8669)
This has been long overdue.
Note that this does not join the X509 and X509V3 error modules, that
will be too many macro changes at this stage.
Fixes#8919
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8925)
OBJ_bsearch_ and OBJ_bsearch_ex_ are generic functions that don't
really belong with the OBJ API, but should rather be generic utility
functions. The ending underscore indicates that they are considered
internal, even though they are declared publicly.
Since crypto/stack/stack.c uses OBJ_bsearch_ex_, the stack API ends up
depending on the OBJ API, which is unnecessary, and carries along
other dependencies.
Therefor, a generic internal function is created, ossl_bsearch().
This removes the unecessary dependencies.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8899)
OpenSSL_version(OPENSSL_DIR) gives you a nicely formatted string for
display, but if all you really want is the directory itself, you were
forced to parsed the string.
This introduces a new function to get diverse configuration data from
the library, OPENSSL_info(). This works the same way as
OpenSSL_version(), but has its own series of types, currently
including:
OPENSSL_INFO_CONFIG_DIR returns OPENSSLDIR
OPENSSL_INFO_ENGINES_DIR returns ENGINESDIR
OPENSSL_INFO_MODULES_DIR returns MODULESDIR
OPENSSL_INFO_DSO_EXTENSION returns DSO_EXTENSION
OPENSSL_INFO_DIR_FILENAME_SEPARATOR returns directory/filename separator
OPENSSL_INFO_LIST_SEPARATOR returns list separator
For scripting purposes, this also adds the command 'openssl info'.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8709)
