while RFC 2312 refers to S/MIME it doesn't actually declare any groups,
RFC 2412 actually talks about DH extensively and the group
defined in the code below is defined on page 47 of it
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12076)
Also make sure that the test do not 'pass' if their initialization fails.
Leave out the expensive parts of DSA key gen and RSA keygen for efficiency.
Fix use of the new CA configuration file test/ca-and-certs.cnf.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11733)
Among others, make clear that OSSL_STORE_close() meanwhile does nothing on NULL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11733)
Output that's supposed to be understood by a TAP parser gets its own
BIOs (|tap_out| and |tap_err|), and is only used internally within
testutils. |bio_out| and |bio_err| is now only used for output that
shouldn't be parsed by the TAP parser, and all output written to those
BIOs are therefore always made to look like comments (it gets prefixed
with "# ").
Indentation and prefixing with "# " is reworked to use BIO_f_prefix(),
which allows us to throw away the internal BIO_f_tap().
The indentation level is now adjusted via a special function.
Fixes#12054
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12057)
Also documents that they meanwhile try all IP addresses resolved for a given domain name
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12017)
We were downgrading to legacy keys at various points in libssl in
order to get or set an encoded point. Now that the encoded point
functions work with provided keys this is no longer necessary.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11898)
An ECX key doesn't have any parameters associated with it. Therefore it
always has all the parameters it needs, and the "has" function should
return 1 if asked about parameters. Without this
EVP_PKEY_missing_parameters() fails for ECX keys.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11898)
Even if there is no data to import we should still create an empty key.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11898)
EVP_PKEY_[get1|set1]_tls_encodedpoint() only worked if an ameth was present
which isn't the case for provided keys. Support has been added to dh,
ec and ecx keys.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11898)
If we hit the error path and create_ssl_ctx_pair has been passed a
pre-created SSL_CTX then we could end up with a double free.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
If sigalgs are not present we should not offer or accept them. We should
test that we handle this correctly.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
The filtering provider can be used to place a filter in front of the
default provider. Initially to filter out certain algorithms from being
available for test purposes.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
Implement a function which enables us to get hold of the provider ctx
for a loaded provider.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
This is useful to get hold of the low-level dispatch tables. This could
be used to create a new provider based on an existing one.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
We should confirm that Signature Algorithms are actually available
through the loaded providers before we offer or select them.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
This mode is severely untested and unmaintained, is seems not to be
used very much.
Closes#4679Closes#6292
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12023)
This is a follow-up of PR #12013.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12026)
Discussions are ongoing but the OMC has approved the in-principle addition
of these algorithms to the upcoming FIPS validation.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12020)
`crypto/ec/ecp_nistz256.c` contained code sections guarded by a
`ECP_NISTZ256_AVX2` define.
The relevant comment read:
> /*
> * Note that by default ECP_NISTZ256_AVX2 is undefined. While it's great
> * code processing 4 points in parallel, corresponding serial operation
> * is several times slower, because it uses 29x29=58-bit multiplication
> * as opposite to 64x64=128-bit in integer-only scalar case. As result
> * it doesn't provide *significant* performance improvement. Note that
> * just defining ECP_NISTZ256_AVX2 is not sufficient to make it work,
> * you'd need to compile even asm/ecp_nistz256-avx.pl module.
> */
Without diminishing the quality of the original submission, it's evident
that this code has been basically unreachable without modifications to
the library source code and is under-tested.
This commit removes these sections from the codebase.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/12019)
Calling 'OSSL_PROVIDER_available(NULL, "default")' would search for
the "default" provider, and in doing so, activate it if necessary,
thereby detecting that it's available... and then immediately free
it, which could deactivate that provider, even though it should stay
available.
We solve this by incrementing the refcount for activated fallbacks one
extra time, thereby simulating an explicit OSSL_PROVIDER_load(), and
compensate for it with an extra ossl_provider_free() when emptying the
provider store.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11926)
There are cases where the fallback providers aren't treated right.
For example, the following calls, in that order, will end up with
a failed EVP_KEYMGMT_fetch(), even thought the default provider
does supply an implementation of the "RSA" keytype.
EVP_KEYMGMT *rsameth = NULL;
OSSL_PROVIDER_available(NULL, "default");
rsameth = EVP_KEYMGMT_fetch(NULL, "RSA", NULL);
For good measure, this also tests that explicit loading of the default
provider won't fail.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11926)
This can happen if the 32-bit counter overflows
and the last block is not a multiple of 16 bytes.
Fixes#12012
[extended tests]
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/12016)
Merge test/P[12]ss.cnf into one config file
Merge CAss.cnf and Uss.cnf into ca-and-certs.cnf
Remove Netscape cert extensions, add keyUsage comment from some cnf files
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11347)
PEM_write_bio_PKCS8PrivateKey(), i2d_PKCS8PrivateKey_bio(),
PEM_write_PKCS8PrivateKey(), and i2d_PKCS8PrivateKey_fp() are affected
by this.
Fixes#11845
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11855)
Correct "EC_KEY_point2buf" to "EC_POINT_point2buf". The former does not exist.
CLA: trivial
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11988)
Reason turns out that "git log -2" is picking up a merge
commit and a random commit message from the master branch.
Restore the expected behavior by using
git log -1 $env:APPVEYOR_PULL_REQUEST_HEAD_COMMIT
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11981)
