This patch adds support for the Linux TLS Rx socket option.
It completes the previous patch for TLS Tx offload.
If the socket option is successful, then the receive data-path of the TCP
socket is implemented by the kernel.
We choose to set this option at the earliest - just after CCS is complete.
Change-Id: I59741e04d89dddca7fb138e88fffcc1259b30132
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
Sessions must be immutable once they can be shared with multiple threads.
We were breaking that rule by writing the ticket index into it during the
handshake. This can lead to incorrect behaviour, including failed
connections in multi-threaded environments.
Reported by David Benjamin.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8383)
Prior to this commit we were keeping a count of how many KeyUpdates we
have processed and failing if we had had too many. This simplistic approach
is not sufficient for long running connections. Since many KeyUpdates
would not be a particular good DoS route anyway, the simplest solution is
to simply remove the key update count.
Fixes#8068
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/8299)
Add SSL_OP64_NO_EXTENDED_MASTER_SECRET, that can be set on either
an SSL or an SSL_CTX. When processing a ClientHello, if this flag
is set, do not indicate that the EMS TLS extension was received in
either the ssl3 object or the SSL_SESSION. Retain most of the
sanity checks between the previous and current session during
session resumption, but weaken the check when the current SSL
object is configured to not use EMS.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3910)
The original 1.1.1 design was to use SSL_CB_HANDSHAKE_START and
SSL_CB_HANDSHAKE_DONE to signal start/end of a post-handshake message
exchange in TLSv1.3. Unfortunately experience has shown that this confuses
some applications who mistake it for a TLSv1.2 renegotiation. This means
that KeyUpdate messages are not handled properly.
This commit removes the use of SSL_CB_HANDSHAKE_START and
SSL_CB_HANDSHAKE_DONE to signal the start/end of a post-handshake
message exchange. Individual post-handshake messages are still signalled in
the normal way.
This is a potentially breaking change if there are any applications already
written that expect to see these TLSv1.3 events. However, without it,
KeyUpdate is not currently usable for many applications.
Fixes#8069
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8096)
set_cipher_list() sets TLSv1.2 (and below) ciphers, and its success or
failure should not depend on whether set_ciphersuites() has been used to
setup TLSv1.3 ciphers.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7759)
When computing the end-point shared secret, don't take the
terminating NULL character into account.
Please note that this fix breaks interoperability with older
versions of OpenSSL, which are not fixed.
Fixes#7956
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7957)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Signed-off-by: Ping Yu <ping.yu@intel.com>
Signed-off-by: Steven Linsell <stevenx.linsell@intel.com>
(Merged from https://github.com/openssl/openssl/pull/7573)
This commit erroneously kept the DTLS timer running after the end of the
handshake. This is not correct behaviour and shold be reverted.
This reverts commit f7506416b1.
Fixes#7998
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8047)
We were setting a limit of SSL3_RT_MAX_PLAIN_LENGTH on the size of the
ClientHello. AFAIK there is nothing in the standards that requires this
limit.
The limit goes all the way back to when support for extensions was first
added for TLSv1.0. It got converted into a WPACKET max size in 1.1.1. Most
likely it was originally added to avoid the complexity of having to grow
the init_buf in the middle of adding extensions. With WPACKET this is
irrelevant since it will grow automatically.
This issue came up when an attempt was made to send a very large
certificate_authorities extension in the ClientHello.
We should just remove the limit.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7424)
1. In addition to overriding the default application name,
one can now also override the configuration file name
and flags passed to CONF_modules_load_file().
2. By default we still keep going when configuration file
processing fails. But, applications that want to be strict
about initialization errors can now make explicit flag
choices via non-null OPENSSL_INIT_SETTINGS that omit the
CONF_MFLAGS_IGNORE_RETURN_CODES flag (which had so far been
both undocumented and unused).
3. In OPENSSL_init_ssl() do not request OPENSSL_INIT_LOAD_CONFIG
if the options already include OPENSSL_INIT_NO_LOAD_CONFIG.
4. Don't set up atexit() handlers when called with INIT_BASE_ONLY.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7986)
The cryptopro extension is supposed to be unsolicited and appears in the
ServerHello only. Additionally it is unofficial and unregistered - therefore
we should really treat it like any other unknown extension if we see it in
the ClientHello.
Fixes#7747
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7984)
We have a number of instances where there are multiple "init" functions for
a single CRYPTO_ONCE variable, e.g. to load config automatically or to not
load config automatically. Unfortunately the RUN_ONCE mechanism was not
correctly giving the right return value where an alternative init function
was being used.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)
This patch adds support for the Linux TLS Tx socket option.
If the socket option is successful, then the data-path of the TCP socket
is implemented by the kernel.
We choose to set this option at the earliest - just after CCS is complete.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5253)
Previously, the API version limit was indicated with a numeric version
number. This was "natural" in the pre-3.0.0 because the version was
this simple number.
With 3.0.0, the version is divided into three separate numbers, and
it's only the major number that counts, but we still need to be able
to support pre-3.0.0 version limits.
Therefore, we allow OPENSSL_API_COMPAT to be defined with a pre-3.0.0
style numeric version number or with a simple major number, i.e. can
be defined like this for any application:
-D OPENSSL_API_COMPAT=0x10100000L
-D OPENSSL_API_COMPAT=3
Since the pre-3.0.0 numerical version numbers are high, it's easy to
distinguish between a simple major number and a pre-3.0.0 numerical
version number and to thereby support both forms at the same time.
Internally, we define the following macros depending on the value of
OPENSSL_API_COMPAT:
OPENSSL_API_0_9_8
OPENSSL_API_1_0_0
OPENSSL_API_1_1_0
OPENSSL_API_3
They indicate that functions marked for deprecation in the
corresponding major release shall not be built if defined.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7724)
Fix some issues in tls13_hkdf_expand() which impact the above function
for TLSv1.3. In particular test that we can use the maximum label length
in TLSv1.3.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7755)
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7738)
If compile OpenSSL with SSL_DEBUG macro, some test cases will cause the
process crashed in the debug code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7707)
A missing SSLfatal call can result in an assertion failed error if the
condition gets triggered.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7594)
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7522)
SSL_get_signature_nid() -- local signature algorithm
SSL_get_signature_type_nid() -- local signature algorithm key type
SSL_get_peer_tmp_key() -- Peer key-exchange public key
SSL_get_tmp_key -- local key exchange public key
Aliased pre-existing SSL_get_server_tmp_key(), which was formerly
just for clients, to SSL_get_peer_tmp_key(). Changed internal
calls to use the new name.
Reviewed-by: Matt Caswell <matt@openssl.org>
SSL(_CTX)?_set_client_CA_list() was a server side only function in 1.1.0.
If it was called on the client side then it was ignored. In 1.1.1 it now
makes sense to have a CA list defined for both client and server (the
client now sends it the the TLSv1.3 certificate_authorities extension).
Unfortunately some applications were using the same SSL_CTX for both
clients and servers and this resulted in some client ClientHellos being
excessively large due to the number of certificate authorities being sent.
This commit seperates out the CA list updated by
SSL(_CTX)?_set_client_CA_list() and the more generic
SSL(_CTX)?_set0_CA_list(). This means that SSL(_CTX)?_set_client_CA_list()
still has no effect on the client side. If both CA lists are set then
SSL(_CTX)?_set_client_CA_list() takes priority.
Fixes#7411
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7503)
TLSv1.3 is more restrictive about the curve used. There must be a matching
sig alg defined for that curve. Therefore if we are using some other curve
in our certificate then we should not negotiate TLSv1.3.
Fixes#7435
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7442)
Rather than relying only on mandatory default digests, add a way for
the EVP_PKEY to individually report whether each digest algorithm is
supported.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7408)
If the private key says it can only support one specific digest, then
don't ask it to perform a different one.
Fixes: #7348
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7408)
use_ecc() was always returning 1 because there are default (TLSv1.3)
ciphersuites that use ECC - even if those ciphersuites are disabled by
other options.
Fixes#7471
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/7479)
Commit 9ef9088c15 switched the SSL/SSL_CTX
statistics counters to using Thread-Sanitizer-friendly primitives.
However, it erroneously converted an addition of -1
(for s->session_ctx->stats.sess_accept) to an addition of +1, since that
is the only counter API provided by the internal tsan_assist.h header
until the previous commit. This means that for each accepted (initial)
connection, the session_ctx's counter would get doubly incremented, and the
(switched) ctx's counter would also get incremented.
Restore the counter decrement so that each accepted connection increments
exactly one counter exactly once (in net effect).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7464)
