An incorrect macro name was being used for Windows detection which meant
we were going down a codepath not intended for Windows and thus failing.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20514)
We create "real" sockets for blocking mode so that we can block on them.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20514)
If a libctx has been associated with the channel, it must be passed down
to the QRX and QTX.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20514)
For example if would be helpful if we got more useful information if the
caller forgot to set the peer address.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20514)
If the QUIC oject receives a ctrl it does not recognise, the chances are
it is intended for the underlying SSL object - so we forward unknown ctrls
there.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20514)
Reported by Marc Schönefeld.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19794)
Add API calls to avoid copying data when reading
These are ossl_quic_rstream_get_record() and
ossl_quic_rstream_release_record().
Add side storage for the stream frame data.
When there are too many packets referenced by the
receiving stream the function ossl_quic_rstream_move_to_rbuf()
can be called to move the data to a ring buffer.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19794)
QUIC TLS was sending some ciphersuites twice in the ClientHello. This
was due to us declaring some TLSv1.3 ciphersuites in the list intended to
describe the TLSv1.2 ciphersuites supported by the SSL_METHOD.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20148)
If we complete the TLS handshake but transport params were not received
then this is a protcol error and we should fail.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
Check that we fail if the server has failed to provide transport params.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
We add callbacks so that TLS handshake messages can be modified by the test
framework before they are passed to the handshake hash, possibly encrypted
and written to the network. This enables us to simulate badly behaving
endpoints.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
We enable querying of the termination reason which is useful for tests.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
From RFC9000, section 19.21 "An extension to QUIC that wishes to use a new
type of frame MUST first ensure that a peer is able to understand the
frame". So if we receive an unknown frame type from a peer we should treat
it as a protocol violation. In fact we ignore it, and ignore all the
contents of the rest of the packet and continue on regardless.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
Also includes helper support to create a QUIC connection inside a test.
We wil use quicfaultstest to deliberately inject faulty datagrams/packets
to test how we handle them.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
We add callbacks so that QUIC packets can be modified by the test
framework before they are encrypted and written to the network. This
enables us to simulate badly behaving endpoints.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
Avoid including QUIC related stuff in the FIPS sources.
Also avoid including libssl headers in ssl3_cbc.c.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19658)
The user_ssl field in an SSL_CONNECTION is no longer used - so remove it.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19748)
Now that we have a real TLS handshake we no longer need the dummy handshake
implementation and it can be removed.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19748)
Having support for the msg_callback will improve debug capabilities.
For record headers we "manufacture" dummy ones so that as far as the
callback is concerned we are doing "normal" TLS.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19748)
We start using the QUIC TLS implementation rather than the dummy one.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19748)
The "user" SSL object which represents the QUIC connection should have an
"inner" SSL object to represent the TLS connection.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19748)
CONNECTION_CLOSE frames can be generated on multiple ELs, so the TX
packetiser was generating it on multiple ELs simultaneously. This fixes
the CONNECTION_CLOSE generation logic so that the lowest non-dropped EL
is always used.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19734)
Previously, we enforced the requirement that the DCIDs be the same for
all packets in a datagram by keeping a pointer to the first RXE
generated from a datagram. This is unsafe and could lead to a UAF if the
first packet is malformed, meaning that no RXE ended up being generated
from it. Keep track of the DCID directly instead, as we should enforce
this correctly even if the first packet in a datagram is malformed (but
has an intelligible header with a DCID and length).
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19703)
Server mode not implemented yet.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19703)
The documentation in the header file of the TXP stated that it is the
caller's responsibility to also notify the QTX of a discarded EL.
However, the implementation did not reflect this. Update the
implementation to reflect the intended design.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19703)
Ordinarily we should not allow ELs to be rekeyed as it makes no sense to
do so. However the INITIAL EL can need to be rekeyed if a connection
retry occurs. Modify the QRL to allow this.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19703)
This adds support for calculating and verifying retry integrity tags. In
order to support this, an 'unused' field is added to the QUIC packet
header structure so we can ensure that the serialization of the header
is bit-for-bit identical to what was decoded.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19703)
While the QUIC RFCs state that the Initial EL should be auto-discarded
when successfully processing a packet at a higher EL, doing this inside
the QRX was not a good idea as this should be handled by the CSM.
We remove this functionality and adapt tests accordingly.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19703)
Previously, the QRX filled in a OSSL_QRX_PKT structure provided by the
caller. This necessitated the caller managing reference counting itself
using a OSSL_QRX_PKT_WRAP structure. The need for this structure has
been eliminated by adding refcounting support to the QRX itself. The QRX
now outputs a pointer to an OSSL_QRX_PKT instead of filling in a
structure provided by the caller. The OSSL_QRX_PKT_WRAP structure has
been eliminated.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19703)
This disables -Wtype-limits /
-Wtautological-constant-out-of-range-compare. Since it generates
warnings for valid and reasonable code, IMO this actually encourages
people to write worse code.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19703)
This is required to support retries during connection establishment.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19703)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19346)
The demux and record RX implemented lists internally. This changes them over
to using list.h.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19377)
Instead of implementing a list internally.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19377)
As opposed to implementing a linked list explicitly.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19377)
This is instead of re-implementing a linked list itself.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19377)
Added SFRAME_LIST structure and QUIC_RSTREAM object to
manage received stream data.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19351)
The re-occuring surprise is that in Win32, size_t is 32 bits...
Fixed by changing size_t to uint64_t in QUIC_CC
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19345)
Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,
there's no need to report ERR_R_MALLOC_FAILURE where they are called
directly, or when SSLfatal() and RLAYERfatal() is used, the reason
`ERR_R_MALLOC_FAILURE` is changed to `ERR_R_CRYPTO_LIB`.
There were a number of places where `ERR_R_MALLOC_FAILURE` was reported
even though it was a function from a different sub-system that was
called. Those places are changed to report ERR_R_{lib}_LIB, where
{lib} is the name of that sub-system.
Some of them are tricky to get right, as we have a lot of functions
that belong in the ASN1 sub-system, and all the `sk_` calls or from
the CRYPTO sub-system.
Some extra adaptation was necessary where there were custom OPENSSL_malloc()
wrappers, and some bugs are fixed alongside these changes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19040)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18838)
Implements the design doc/designs/quic-design/rx-depacketizer.md.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18838)
Also add internal functionality to get a QUIC_CONNECTION pointer from
an SSL pointer, and setters / getters for the GQX and ACKM fields.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18838)
We automatically dropped Initial keys when receiving a Handshake packet,
but did this regardless of whether the packet was successfully decrypted
and authenticated. Per the RFC, we should only drop Initial keys when
successfully processing a Handshake packet.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19176)
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19082)
This is instead of time_t and struct timeval. Some public APIs mandate a
presence of these two types, but they are converted to OSSL_TIME internally.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19082)
- Adds an RX time field to the OSSL_QRX_PKT structure.
- Adds a timekeeping argument to ossl_demux_new which is used to determine
packet reception time.
- Adds a decoded PN field to the OSSL_QRX_PKT structure.
This has to be decoded by the QRX anyway, and its omission was an oversight.
- Key update support for the TX side.
- Minor refactoring.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18949)
This is the initial implementation of the ACK Manager for OpenSSL's QUIC
support, with supporting design documentation and tests.
Because the ACK Manager also depends on the Statistics Manager, it is
also implemented here. The Statistics Manager is quite simple, so this
does not amount to a large amount of extra code.
Because the ACK Manager depends on a congestion controller, it adds a
no-op congestion controller, which uses the previously workshopped
congestion control API.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18676)
The same-ish module as the TX packetizer, handling the opposite direction.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18610)
This prevents misuses creeping in.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18882)
This adds functions for encoding and decoding QUIC frames.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18795)
Make the SSL object polymorphic based on whether this is
a traditional SSL connection, QUIC connection, or later
to be implemented a QUIC stream.
It requires adding if after every SSL_CONNECTION_FROM_SSL() call
which itself has to be added to almost every public SSL_ API call.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18612)
This requires some code being pulled into the empty protocol
implementation so the state machinery works.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18307)
