Some KDF implementations were available before the current EVP_KDF API.
They were used via EVP_PKEY_derive. There exists a bridge between the old
API and the EVP_KDF API however this bridge itself uses a legacy
EVP_PKEY_METHOD. This commit implements a provider side bridge without
having to use any legacy code.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12573)
The default and legacy providers currently return 1 for status and self test checks.
Added test to show the 3 different stages the self test can be run (for installation, loading and on demand).
For the fips provider:
- If the on demand self test fails, then any subsequent fetches should also fail. To implement this the
cached algorithms are flushed on failure.
- getting the self test callback in the fips provider is a bit complicated since the callback hangs off the core
libctx (as it is set by the application) not the actual fips library context. Also the callback can be set at
any time not just during the OSSL_provider_init() so it is calculated each time before doing any self test.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11752)
Changed many tests so they also test fips (and removed 'availablein = default' from some tests).
Seperated the monolithic evppkey.txt file into smaller maintainable groups.
Changed the availablein option so it must be first - this then skips the entire test before any fetching happens.
Changed the code so that all the OPENSSL_NO_XXXX tests are done in code via methods such as is_cipher_disabled(alg),
before the fetch happens.
Added missing libctx's found by adding a libctx to test_evp.
Broke up large data files for cipher, kdf's and mac's into smaller pieces so they no longer need 'AvailableIn = default'
Added missing algorithm aliases for cipher/digests to the providers.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12236)
Move the libcrypto serialisation functionality into a place where it can
be provided at some point. The serialisation still remains native in the
default provider.
Add additional code to the list command to display what kind of serialisation
each entry is capable of.
Having the FIPS provider auto load the base provider is a future
(but necessary) enhancement.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12104)
Added Algorithm names AES-128-CBC-CTS, AES-192-CBC-CTS and AES-256-CBC-CTS.
CS1, CS2 and CS3 variants are supported.
Only single shot updates are supported.
The cipher returns the mode EVP_CIPH_CBC_MODE (Internally it shares the aes_cbc cipher code). This
would allow existing code that uses AES_CBC to switch to the CTS variant without breaking code that
tests for this mode. Because it shares the aes_cbc code the cts128.c functions could not be used directly.
The cipher returns the flag EVP_CIPH_FLAG_CTS.
EVP_CIPH_FLAG_FIPS & EVP_CIPH_FLAG_NON_FIPS_ALLOW have been deprecated.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12094)
The new naming scheme consistently usese the `OSSL_FUNC_` prefix for all
functions which are dispatched between the core and providers.
This change includes in particular all up- and downcalls, i.e., the
dispatched functions passed from core to provider and vice versa.
- OSSL_core_ -> OSSL_FUNC_core_
- OSSL_provider_ -> OSSL_FUNC_core_
For operations and their function dispatch tables, the following convention
is used:
Type | Name (evp_generic_fetch(3)) |
---------------------|-----------------------------------|
operation | OSSL_OP_FOO |
function id | OSSL_FUNC_FOO_FUNCTION_NAME |
function "name" | OSSL_FUNC_foo_function_name |
function typedef | OSSL_FUNC_foo_function_name_fn |
function ptr getter | OSSL_FUNC_foo_function_name |
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12222)
Move the three different DRBGs to the provider.
As part of the move, the DRBG specific data was pulled out of a common
structure and into their own structures. Only these smaller structures are
securely allocated. This saves quite a bit of secure memory:
+-------------------------------+
| DRBG | Bytes | Secure |
+--------------+-------+--------+
| HASH | 376 | 512 |
| HMAC | 168 | 256 |
| CTR | 176 | 256 |
| Common (new) | 320 | 0 |
| Common (old) | 592 | 1024 |
+--------------+-------+--------+
Bytes is the structure size on the X86/64.
Secure is the number of bytes of secure memory used (power of two allocator).
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11682)
With capabilities we can query a provider about what it can do.
Initially we support a "TLS-GROUP" capability.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
A provider could be linked against a different version of libcrypto than
the version of libcrypto that loaded the provider. Different versions of
libcrypto could define opaque types differently. It must never occur that
a type created in one libcrypto is used directly by the other libcrypto.
This will cause crashes.
We can "cheat" for "built-in" providers that are part of libcrypto itself,
because we know that the two libcrypto versions are the same - but not for
other providers.
To ensure this does not occur we use different types names for the handful
of opaque types that are passed between the core and providers.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11758)
This started with adding forward declarations of all provider side
interface functions, and fixing all compiler errors.
Furthermore, diminish the faulty assumption that the provider context
is and always will be just a library context. That means adding a
teardown function in all providers that aren't necessarily built into
libcrypto.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11777)
DES, idea, seed, rc2, rc4, rc5, cast and blowfish have been moved out of the default provider.
Code shared between desx and tdes has been moved into a seperate file (cipher_tdes_common.c).
3 test recipes failed due to using app/openssl calls that used legacy ciphers.
These calls have been updated to supply both the default and legacy providers.
Fixed openssl app '-provider' memory leak
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11419)
This is largely based on the existing X25519 and X448 serializers - but
a few adjustments were necessary so that we can identify what type of key
we are using. Previously we used the keylen for this but X25519 and
ED25519 have the same keylen.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11272)
At the moment we only provider support for these algorithms in the default
provider. These algorithms only support "one shot" EVP_DigestSign() and
EVP_DigestVerify() as per the existing libcrypto versions.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11261)
Provide EC serializers for text, pem and der.
EC parameters use ANS1 'CHOICE' - which means they are more embedded than other parameters used by
other KEY types (which normally have a SEQUENCE at the top level).
For this reason the ANS1_STRING type that was being passed around has been changed to a void so that the
code can still be shared with EC.
The EC serializer only supports named curves currently.
NOTE the serializer code assumes PKCS8 format - if the older encode methods are needed they will need to be
added in another PR. (Probably when deserialization is considered).
EVP_PKEY_key_fromdata_init was changed from using a keypair selection to all bits of a key. A side effect of this was
that the very restrictive checks in the ecx code needed to be relaxed as it was assuming all selection flags were non
optional. As this is not the case for any other key the code has been modified.
Fixed a bug in legacy_ctrl_str_to_params() - "ecdh_cofactor_mode" was being incorrectly converted to the wrong keyname.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11107)
Provide serializers for X25519 and X448 for text, pem and der. There are
no parameter serializers because there are no parameters for these
algorithms.
Add some documentation about the various import/export types available
Add additional testing for the serializers
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11095)
Property "default" no longer exists, replace "default=yes" with
"provider=default"
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11150)
This includes legacy PSS controls to params conversion, and an attempt
to generalise the parameter names when they are suitable for more than
one operation.
Also added crypto/rsa/rsa_aid.c, containing proper AlgorithmIdentifiers
for known RSA+hash function combinations.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10557)
Replace the properties default, fips and legacy with a single property
called "provider". So, for example, instead of writing "default=yes" to
get algorithms from the default provider you would instead write
"provider=default". We also have a new "fips" property to indicate that
an algorithm is compatible with FIPS mode. This applies to all the
algorithms in the FIPS provider, as well as any non-cryptographic
algorithms (currently only serializers).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11097)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
Libssl uses the null cipher in certain situations. It should be
converted to a provided cipher.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10865)
This is very simply to allow the common case, where the KEYMGMT is
fetched first, and all names are needed at that time to secure that
they are found.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10647)
The DSA serializers are implemented, but didn't get added to the
default provider's serializer algorithm table.
Fixes#10645
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10772)
Also Add ability for providers to dynamically exclude cipher algorithms.
Cipher algorithms are only returned from providers if their capable() method is either NULL,
or the method returns 1.
This is mainly required for ciphers that only have hardware implementations.
If there is no hardware support, then the algorithm needs to be not available.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10146)
The new serializer code broke no-dh builds so we add some more guards to fix it.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/10644)
This also adds the missing accessor RSA_get0_pss_params(), so those
parameters can be included in the PKCS#8 data structure without
needing to know the inside of the RSA structure.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10394)
The BIO_vprintf() will allow the provider to print any text, given a
BIO supplied by libcrypto.
Additionally, we add a provider library with functions to collect all
the currently supplied BIO upcalls, as well as wrappers around those
upcalls.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10394)
Only the KDF and PRF algorithms used the macros for their names, all other
algorithms used a string name directly. This brings the KDFs and PRFs into
line with the rest.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10293)
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9949)
providers/default/defltprov.c and providers/legacy/legacyprov.c
are moved up to providers/ and providers/build.info is adjusted
accordingly.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10088)
