On IA64 the use of setjmp()/ longjmp() does not properly save the
state of the register stack engine (RSE) and requires extra care.
The use of it in the async interface led to a failure in the
test_async.t test since its introduction in 1.1.0 series.
Instead of properly adding the needed assembly bits here use the
swapcontext() function which properly saves the whole context.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17370)
OSSL_trace_end() should validate that the category it has been passed
by the caler is valid, and return immediately if not.
Fixes#17353
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17371)
There are missing checks of its return value in 8 different spots.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17154)
When pem_password_cb is used from SSL_CTX, its size
parameter should be equal to PEM_BUFSIZE.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/17320)
The UI method always adds NUL termination and we need to
compensate for that when using it from a pem_password_cb
because the buffer used in pem_password_cb does not account
for that and the returned password should be able fill the
whole buffer.
Fixes#16601
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/17320)
That is: ossl_property_name_str and ossl_property_value_str.
These only have high level tests during the creation of child library
contexts.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17325)
The existing code does this conversion by searching the hash table for the
appropriate index which is slow and expensive.
Fixes#15867
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17325)
If a shlib_variant is used then the dynamic version information for
symbols will be different from what the symbol presence test was
expecting. We just make it more liberal about what it accepts as dynamic
version information.
Fixes#17366
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17372)
The use of -proxy prevented s_client from correctly sending the target
hostname as SNI data.
Fixes#17232
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17248)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17350)
(cherry picked from commit 0caf281324)
* Evaluating code-refs in Configure can sometimes set the default
variable `$_`
* Prevent spillage influencing the target property by using named
variable in loop
CLA: trivial
Fixes gh-17321
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17322)
Make app_http_tls_cb() tidy up on disconnect the SSL BIO it pushes on connect.
Make OSSL_HTTP_close() respect this.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17318)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17306)
It turned out that loading non-ASN.1 contents using the HTTP client
fails over TLS because SSL BIOs do not support the gets method.
This PR provides a workaround by using the less efficient BIO_get_line() function
in case BIO_gets() returns -2, which means that it is not supported by the BIO.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17317)
ctx may be NULL at 178 line
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17293)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17280)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17276)
Add test cases for RNDR and RNDRRS. Combine tests for RDRAND and RNDR to
share common logic.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15361)
Create new provider for RNDRRS. Modify support for rand_cpu to default to
RDRAND/RDSEED on x86 and RNDRRS on aarch64.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15361)
Include aarch64 asm instructions for random number generation using the
RNDR and RNDRRS instructions. Provide detection functions for RNDR and
RNDRRS getauxval.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15361)
Ignore -server with -rspin and exclude all of -use_mock_srv/-port/-rspin.
On the other hand, -server is required if no -use_mock_srv/-port/-rspin is given.
Ignore -tls_used with -use_mock_srv and -rspin; it is not supported with -port.
If -server is not given, ignore -proxy, -no_proxy, and -tls_used.
Also slightly improve the documentation of the two mock server variants.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17254)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17274)
