The function SSL_get_shared_ciphers() is supposed to return ciphers shared
by the client and the server. However it only ever returned the client
ciphers.
Fixes#5317
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6113)
No need to buildtest on opensslconf.h
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6149)
which is used for ASN1_STRING_print_ex*() and X509_NAME_print_ex*().
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6105)
Fixes#6022
In commit de4d764e32, the following SSL_CTRL #define's where renamed
SSL_CTRL_GET_CURVES -> SSL_CTRL_GET_GROUPS
SSL_CTRL_SET_CURVES -> SSL_CTRL_SET_GROUPS
SSL_CTRL_SET_CURVES_LIST -> SSL_CTRL_SET_GROUPS_LIST
SSL_CTRL_GET_SHARED_CURVE -> SSL_CTRL_GET_SHARED_GROUP
The corresponding function-like macros (e.g, SSL_get1_curves(ctx, s)) were
renamed, too, and compatibility #define's were added. This was overlooked for
the above constants. Since the constants are part of the public interface,
they must not be removed for a minor release.
As a consequence the Qt5 configure check (and the build) fails.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6023)
fix some indents, and restrict to 80 cols some lines.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4466)
Fixes#5961
This reverts commit 3c5a61dd0f.
The macros OPENSSL_MAKE_VERSION() and OPENSSL_VERSION_AT_LEAST() contain
errors and don't work as designed. Apart from that, their introduction
should be held back until a decision has been mad about the future
versioning scheme.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5968)
Adding support for these operations for the EdDSA implementations
makes pkeyutl usable for signing/verifying for these algorithms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5880)
There are two undocumented DSA parameter generation options available in
the genpkey command line app:
dsa_paramgen_md and dsa_paramgen_q_bits.
These can also be accessed via the EVP API but only by using
EVP_PKEY_CTX_ctrl() or EVP_PKEY_CTX_ctrl_str() directly. There are no
helper macros for these options.
dsa_paramgen_q_bits sets the length of q in bits (default 160 bits).
dsa_paramgen_md sets the digest that is used during the parameter
generation (default SHA1). In particular the output length of the digest
used must be equal to or greater than the number of bits in q because of
this code:
if (!EVP_Digest(seed, qsize, md, NULL, evpmd, NULL))
goto err;
if (!EVP_Digest(buf, qsize, buf2, NULL, evpmd, NULL))
goto err;
for (i = 0; i < qsize; i++)
md[i] ^= buf2[i];
/* step 3 */
md[0] |= 0x80;
md[qsize - 1] |= 0x01;
if (!BN_bin2bn(md, qsize, q))
goto err;
qsize here is the number of bits in q and evpmd is the digest set via
dsa_paramgen_md. md and buf2 are buffers of length SHA256_DIGEST_LENGTH.
buf2 has been filled with qsize bits of random seed data, and md is
uninitialised.
If the output size of evpmd is less than qsize then the line "md[i] ^=
buf2[i]" will be xoring an uninitialised value and the random seed data
together to form the least significant bits of q (and not using the
output of the digest at all for those bits) - which is probably not what
was intended. The same seed is then used as an input to generating p. If
the uninitialised data is actually all zeros (as seems quite likely)
then the least significant bits of q will exactly match the least
significant bits of the seed.
This problem only occurs if you use these undocumented and difficult to
find options and you set the size of q to be greater than the message
digest output size. This is for parameter generation only not key
generation. This scenario is considered highly unlikely and
therefore the security risk of this is considered negligible.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5800)
The GOST engine needs to be loaded before we initialise libssl. Otherwise
the GOST ciphersuites are not enabled. However the SSL conf module must
be loaded before we initialise libcrypto. Otherwise we will fail to read
the SSL config from a config file properly.
Another problem is that an application may make use of both libcrypto and
libssl. If it performs libcrypto stuff first and OPENSSL_init_crypto()
is called and loads a config file it will fail if that config file has
any libssl stuff in it.
This commit separates out the loading of the SSL conf module from the
interpretation of its contents. The loading piece doesn't know anything
about SSL so this can be moved to libcrypto. The interpretation of what it
means remains in libssl. This means we can load the SSL conf data before
libssl is there and interpret it when it later becomes available.
Fixes#5809
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5818)
Fail harshly (in debug builds) when rand_pool_acquire_entropy isn't
delivering the required amount of entropy. In release builds, this
produces an error with details.
We also take the opportunity to modernise the types used.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5857)
The RAND_DRBG API was added in PR #5462 and modified by PR #5547.
This commit adds the corresponding documention.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5461)
Constructed types with a recursive definition (such as can be found in
PKCS7) could eventually exceed the stack given malicious input with
excessive recursion. Therefore we limit the stack depth.
CVE-2018-0739
Credit to OSSFuzz for finding this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Since the public and private DRBG are per thread we don't need one
per ssl object anymore. It could also try to get entropy from a DRBG
that's really from an other thread because the SSL object moved to an
other thread.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5547)
Without actually using EVP_PKEY_FLAG_AUTOARGLEN
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4793)
There is a requirements of having access to a live entropy source
which we can't do with the default callbacks. If you need prediction
resistance you need to set up your own callbacks that follow the
requirements of NIST SP 800-90C.
Reviewed-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
GH: #5402
This commit adds a new api RAND_DRBG_set_defaults() which sets the
default type and flags for new DRBG instances. See also #5576.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5632)
Fixes#4403
This commit moves the internal header file "internal/rand.h" to
<openssl/rand_drbg.h>, making the RAND_DRBG API public.
The RAND_POOL API remains private, its function prototypes were
moved to "internal/rand_int.h" and converted to lowercase.
Documentation for the new API is work in progress on GitHub #5461.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5462)
Renamed to EVP_PKEY_new_raw_private_key()/EVP_new_raw_public_key() as per
feedback.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
