ACKs are not restricted by CC so do not consider CC when determining
when we will emit an ACK.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22476)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22485)
If a URXE cannot be processed yet then we add it to the urx_deferred list.
Later, when they can be processed, we requeue them in the urx_pending list.
We must not reverse the order when doing so. We want to process the URXEs
in the order that they were received.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22452)
We need to call quic_free() to free the record layer to ensure than any
BIO that was already set is also freed.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
When calling qrx_relocate_buffer, both the rxe and the pointer to the token
may be changing locations. We have to use a temporary copy of the token
pointer to avoid referencing the old location of the rxe.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
We accept a bad original destination connection id in the transport params
while we are fuzzing since this may change every time.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
Return SSL_SENT_SHUTDOWN and SSL_RECEIVED_SHUTDOWN with semantics
similar to TLS connections.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22408)
The one in ch_rx_handle_packet() is a tuning thing -> QUIC FUTURE
The one in ossl_quic_tserver_shutdown() is a server thing -> QUIC SERVER
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22408)
RFC 9000 s 17.2.5.2 says
> After the client has received and processed an Initial or Retry packet
> from the server, it MUST discard any subsequent Retry packets that it
> receives.
We were checking for multiple Retry packets, but not if we had already
processed an Initial packet.
Fixes the assertion failure noted in
https://github.com/openssl/openssl/pull/22368#issuecomment-1765618884
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22411)
Although many of the QUIC tests use fake time, the time we pass to the
ossl_crypto_condvar_wait_timeout() must be a real time.
Passing fake time was causing the QUIC tserver test to hang because
ossl_crypto_convar_wait_timeout() always timed out immediately and never
relinquished the CPU.
If using fake time we adjust the time to real time just before using it.
Fixes#22020
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22301)
An application may pass in a whole BIO chain via SSL_set_bio(). When we
free the BIO we should be using BIO_free_all() not BIO_free() like we do
with TLS.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22098)
TLS misconfiguration errors should be shown to the application to enable
diagnosis of the problem. Otherwise you just get a generical "internal
error" message.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22066)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22011)
Check that we can set and use a PSK when establishing a QUIC connection.
Fixesopenssl/project#83
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22011)
Found by running the checkpatch.pl Linux script to enforce coding style.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21468)
It's needed for platforms that don't define UINT64_MAX and similar macros
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21951)
SSL_get_error() may respond with some retry errors that are not IO related.
In particular SSL_ERROR_WANT_RETRY_VERIFY and SSL_ERROR_WANT_X509_LOOKUP.
These can occur during a TLS handshake. If they occur when a QUIC Connection
is performing a TLS handshake then we need to propagate these up to the QCSO.
We also handle SSL_ERROR_WANT_CLIENT_HELLO_CB. This one will only ever
occur on the server side which we don't currently support. However adding
the handling for it now is identical to all the other handling so including
it is no cost, and will be needed when we do add server support.
We are not concerned with SSL_ERROR_WANT_ASYNC or SSL_ERROR_WANT_ASYNC_JOB
since we do not support async operation with QUIC.
Fixesopenssl/project#199
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21922)
They produce a warning `suggest braces around initialization of subobject`
otherwise.
Add -Wno-missing-braces to silence old clang compilers
And drop unnecessary braces in zeroing initializers.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21823)
The TLS record type is a single byte value so we can
use uint8_t for it. This allows passing its address
directly to SSL_trace() instead of converting it to
a single byte type first.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21823)
If we want to send a CONNECTION_CLOSE frame then one is enough unless we
are scheduled to send another one. Now that we can create more than one
datagram in one go this is now required.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21798)
If we've got more data to send than will fit in a single datagram we should
keep generating those datagrams until we've sent it all.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21798)
This is useful for debugging purposes. The standard SSL_trace msgcallback
can be used with tserver.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21800)
Even in case of later failure we need to flush
the previous packets.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21700)
Raise errors when appropriate.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21700)
This improves tracking where the failure was triggered.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21700)
RFC says that successful decryption of HANDSHAKE el packet
triggers the discard on server side only.
On client we discard INITIAL el when we successfully send
a HANDSHAKE packet.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21713)
In some cases where a FIN has been received but with no data quic_read_actual
was failing to raise SSL_ERROR_ZERO_RETURN. This meant that we could end up
blocking in SSL_read(_ex) for too long.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21780)
The comments in quic_tls.c claimed that the dummybio was never used by
us. In fact that is not entirely correct since we set and cleared the
retry flags on it. This means that we have to manage it properly, and update
it in the event of set1_bio() call on the record layer method.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21686)
This should result in a QUIC PROTOCOL_VIOLATION
We also add tests for a post-handshake KeyUpdate, and a NewSessionTicket
with an invalid max_early_data value.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21686)
The max_early_data value must be 0xffffffff if the extension is present in
a NewSessionTicket message in QUIC. Otherwise it is a PROTOCOL_VIOLATION.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21686)
An OpenSSL QUIC client does not send the post_handshake_auth extension.
Therefore if a server sends a post-handsahke CertificateRequest then this
would be treated as a TLS protocol violation with an "unexpected message"
alert code. However RFC 9001 specifically requires us to treat this as
QUIC PROTOCOL_VIOLATION. So we have to translate the "unexpected message"
alert code in this one instance.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21686)
For some of the items we add FUTURE/SERVER/TESTING/MULTIPATH
designation to indicate these do not need to be resolved
in QUIC MVP release.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21539)
