Test that input value of 1 for p is treated as an error
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22960)
Confirm that using an ENGINE works as expected with TLS even if it is
loaded late (after construction of the SSL_CTX).
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22864)
Since the gen->type will not be set in a2i_GENERAL_NAME
the gen->d.otherName will not be automatically
cleaned up by GENERAL_NAME_free.
Also fixed a similar leak in a2i_GENERAL_NAME,
where ASN1_STRING_set may fail but gen->d.ia5
will not be automatically cleaned up.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22996)
Test the next arithmetic operation to safely determine if adding the
next digit in the passed property string will overflow
Also, noted a bug in the parse_hex code. When parsing non-digit
characters (i.e. a-f and A-F), we do a tolower conversion (which is
fine), and then subtract 'a' to get the hex value from the ascii (which
is definately wrong). We should subtract 'W' to convert tolower
converted hex digits in the range a-f to their hex value counterparts
Add tests to test_property_parse_error to ensure overflow checks work
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/22874)
Like in #17345, evp_extra_test links libcrypto statically, but also has
a dynamic/shared load via the legacy provider, which leads to ambiguous
behavior in evp_extra_test on some platforms, usually a crash (SIGSEGV)
on exit via the atexit handlers. Statically link the legacy provider to
avoid this.
Fixes#22819
Helped-by: Neil Horman <nhorman@openssl.org>
Helped-by: Tomas Mraz <tomas@openssl.org>
Signed-off-by: Randall S. Becker <randall.becker@nexbridge.ca>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22905)
We test its validity by trying to load it.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22866)
Common symbols (type 'C' in the 'nm' output) are allowed to be defined more
than once. This makes test/recipes/01-test_symbol_presence.t reflect that.
Fixes#22869 (partially)
Fixes#22837
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22880)
On some platforms, the compiler may add symbols that aren't ours and that we
should ignore.
They are generally expected to start with a double underscore, and thereby
easy to detect.
Fixes#22869 (partially)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22880)
Coverity recorded issues 1551739 and 1551737, a potential double free in the
tests. It occurs when the DUP operation fails in such a way val3_read is
returned as the same pointer as val2_read. Ideally it should never
happen, but resetting val3_read to 0 should satisfy coverity that there
is no issue here
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22800)
Add null check to cmac_size(). This avoids a seg-fault encountered
with cmac when EVP_MAC_CTX_get_mac_size() is called before init.
Extend mac testing in evp_test.c to check that the sizes returned by
EVP_MAC_CTX_get_mac_size() before and after init make sense (this also
ensures that we no longer seg-fault).
Fixes#22842
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22858)
There were no PKIX-TA(0) SPKI(1) Full(0) (i.e. "0 1 0") test cases in
"danetest.in".
There is now at least a success case, which will exercise freeing the public
key after it is sanity checked, since with PKIX-TA(0) there's nothing we can do
with just the raw public key, a full chain to a local trust anchor is in any
case required.
The failure (to match) code path is already well oiled, but failure to decode
while adding malfored TLSA records could still use some additional tests...
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22821)
We don't need the decoded X.509 Full(0) certificate for the EE usages 1 and 3,
because the leaf certificate is always part of the presented chain, so the
certificate is only validated as well-formed, and then discarded, but the
TLSA record is of course still used after the validation step.
Added DANE test cases for: 3 0 0, 3 1 0, 1 0 0, and 1 1 0
Reported by Claus Assmann.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22821)
Check that the "consumed" parameter is working as expected.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22718)
If a single packet contains data from multiple streams we need to keep track
of the cummulative connection level credit consumed across all of the
streams. Once the connection level credit has been consumed we must stop
adding stream data.
Fixes#22706
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22718)
Instead of just accepting a number of bytes, allows openssl rand to
accept a k|m|g suffix to scale to kbytes/mbytes/gbytes
Fixes#22622
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22624)
The upper limit of the output size is the default output size of
the respective algorithm variants.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/22659)
Fixes#7894
This allows SHAKE to squeeze multiple times with different output sizes.
The existing EVP_DigestFinalXOF() API has been left as a one shot
operation. A similar interface is used by another toolkit.
The low level SHA3_Squeeze() function needed to change slightly so
that it can handle multiple squeezes. This involves changing the
assembler code so that it passes a boolean to indicate whether
the Keccak function should be called on entry.
At the provider level, the squeeze is buffered, so that it only requests
a multiple of the blocksize when SHA3_Squeeze() is called. On the first
call the value is zero, on subsequent calls the value passed is 1.
This PR is derived from the excellent work done by @nmathewson in
https://github.com/openssl/openssl/pull/7921
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21511)
quic_multistream test was issuing a signal on a condvar after dropping
the corresponding mutex, not before, leading to potential race
conditions in the reading of the associated data
Fixes#22588
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22616)
This avoids code duplication and provides variable-size support
for BLAKE2s like 786b9a8
Test data obtained with libb2 with the following programs:
==> b2.c <==
#include <blake2.h>
#include <unistd.h>
int main() {
char buf[16] = {};
blake2s(buf, 0, 0, 16, 0, 0);
write(1, buf, 16);
}
==> b3.c <==
#include <blake2.h>
#include <unistd.h>
int main() {
char buf[10] = {};
blake2s(buf, "\x61", 0, 10, 1, 0);
write(1, buf, 10);
}
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22444)
Fixes Coverity 1548382
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22606)
ossl_quic_sstream_is_totally_acked would return 0
if no data had been appended to the stream yet.
Fixed and added tests.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22580)
Although the previous commit is enough to fix the immediate cause of the
stochastic failure on Windows, this is a more resilient fix; make sure
we only inject a given frame into the correct packet type for our
various injection functions.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22578)
The QUIC fault injector frame injection functionality injects injected
frames on whatever EL we happen to be using to generate a packet in.
This means we sometimes inject the frame into a packet type it is not
allowed to be in, causing a different error code to be generated.
Fix this by making sure the connection is fully established before
trying to generate the frame in question.
Fixes#22348.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22578)
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22499)
In digest_test_run() there are now 3 parameters possible plus
the sentinel value. In reality we will never use all three
at once but Coverity rightfully complains that it is possible
to overflow the params array.
Fixes Coverity 1548054
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22521)
To enhance test coverage for AES-ECB mode, we provided longer additional
testing patterns for AES-128/192/256-ECB.
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
To enhance test coverage for AES-XTS mode, we provided longer additional
testing patterns from BoringSSL for AES-XTS testing.
Signed-off-by: Jerry Shih <jerry.shih@sifive.com>
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
To enhance test coverage for AES-GCM mode, we provided longer additional
testing patterns for AES-GCM testing.
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Signed-off-by: Jerry Shih <jerry.shih@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
To enhance test coverage for AES-CBC mode, we provided longer additional
test patterns for AES-CBC testing.
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
While RFC 5705 implies that the maximum length of context for
exporters to be 65535 bytes as the length is embedded in uint16, the
current implementation enforces much smaller limit, which is less than
1024 bytes. This removes the restriction by dynamically allocating
memory.
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22465)
