Its not required that crt params be available in an RSA key, so don't
perform an error check on them
Fixes#29135
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22334)
According to the manual page, EVP_PKEY_CTX_set0_rsa_oaep_label()
should accept NULL as the label argument, though the function
currently rejects it while setting the corresponding octet string
parameter with OSSL_PARAM_construct_octet_string, which expects
non-NULL input. This adds a workaround to the caller for backward
compatibility.
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22397)
Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,
there's no need to report ERR_R_MALLOC_FAILURE where they are called
directly, or when SSLfatal() and RLAYERfatal() is used, the reason
`ERR_R_MALLOC_FAILURE` is changed to `ERR_R_CRYPTO_LIB`.
There were a number of places where `ERR_R_MALLOC_FAILURE` was reported
even though it was a function from a different sub-system that was
called. Those places are changed to report ERR_R_{lib}_LIB, where
{lib} is the name of that sub-system.
Some of them are tricky to get right, as we have a lot of functions
that belong in the ASN1 sub-system, and all the `sk_` calls or from
the CRYPTO sub-system.
Some extra adaptation was necessary where there were custom OPENSSL_malloc()
wrappers, and some bugs are fixed alongside these changes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15974)
Also cap the strengths for values under these two because the formula
overestimates around them.
The formula NIST gives doesn't match the table also presented in IG 7.5
Partial fix for #15421
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/15428)
Almost all were notes about wanting to deprecate CTRLs/utility functions.
Fixes#15325
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15328)
This required refactoring a number of functions from the diverse
EVP_PKEY_ASN1_METHOD implementations to become shared backend
functions. It also meant modifying a few of them to return pointers
to our internal RSA / DSA/ DH / EC_KEY, ... structures instead of
manipulating an EVP_PKEY pointer directly, letting the caller do the
latter.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
This commit attempts to fix the an issue when generating a key of type
EVP_PKEY_RSA_PSS. Currently, EVP_PKEY_CTX_set_rsa_keygen_bits will
return -1 if the key id is not of type EVP_PKEY_RSA. This commit adds
EVP_PKEY_RSA_PSS to also be accepted.
The macro EVP_PKEY_CTX_set_rsa_pss_keygen_md si converted into a
function and it is now called in legacy_ctrl_to_param.
Fixes#12384
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13099)
Because decoders are coupled with keymgmts from the same provider,
ours need to produce provider side keys the same way. Since our
keymgmts create key data with the provider library context, so must
our decoders.
We solve with functions to adjust the library context of decoded keys,
and use them.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13661)
This includes error reporting for libcrypto sub-libraries in surprising
places.
This was done using util/err-to-raise
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13318)
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
Fixes#12635
As discussed in the issue, supporting the set0-like semantics long-term is not necessarily desirable, although necessary for short-term compatibility concerns. So I've deprecated the original method and added an equivalent that is explicitly labelled as set1.
I tried to audit existing usages of the (now-deprecated) API and update them to use set1 if that appeared to align with their expectations.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12917)
For FIPS validation purposes - Automated Cryptographic Validation Protocol (ACVP) tests need to be
performed. (See https://github.com/usnistgov/ACVP). These tests are very similiar to the old CAVS tests.
This PR uses a hardwired subset of these test vectors to perform similiar operations,
to show the usage and prove that the API's are able to perform the required operations.
It may also help with communication with the lab (i.e- The lab could add a test here to show
a unworking use case - which we can then address).
The EVP layer performs these tests instead of calling lower level API's
as was done in the old FOM.
Some of these tests require access to internals that are not normally allowed/required.
The config option 'acvp_tests' (enabled by default) has been added so that this
access may be removed.
The mechanism has been implemented as additional OSSL_PARAM values that can be set and get.
A callback mechanism did not seem to add any additional benefit.
These params will not be added to the gettables lists.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11572)
RSA_PSS_PARAMS carries with it a lot of baggage in form of X509_ALGOR
and ASN1_INTEGER, which we would rather avoid in our providers.
Therefore, we create a parallell structure - RSA_PSS_PARAMS_30 - that
contains the same information, but uses numeric identities (*) and C
integers (**). This makes it simpler to handle.
Note that neither this structure nor its contents are passed between
libcrypto and the providers. Instead, the numeric identities are
translated to and from names, which are then passed over that
boundary.
For future considerations, we might consider dropping RSA_PSS_PARAMS
entirely. For now, it's still reserved for EVP_PKEY_ASN1_METHOD code,
which RSA_PSS_PARAMS_30 is (almost entirely) reserved for use in our
providers.
(*) We use NIDs in this case, because we already have them and because
only algorithms that libcrypto knows about are permitted in PSS
restrictions. We could use any number series we want, as long as we
know for sure what they represent.
(**) That's for saltlen and for trailerfield, which are never expect
to surpass the set of numbers that fit in a regular 'int'.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)
This macro is used to determine if certain pieces of code should
become part of the FIPS module or not. The old name was confusing.
Fixes#11538
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11539)
Since this is public, it is best to make the underlying structure opaque.
This means converting from stack allocation to dynamic allocation for all
usages.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11390)
The catalyst for this is the difficult of passing BNs through the other
OSSL_PARAM APIs.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11390)
Fixes#11108.
It only sets q if a valid named group is found.
The function signature was recently changed to pass a non const DH pointer
in order to allow the nid to be cached internally. As an extension of this
the value of q can now also be set as q is always known for named groups.
The length field is also set if q is set.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11114)
This includes legacy PSS controls to params conversion, and an attempt
to generalise the parameter names when they are suitable for more than
one operation.
Also added crypto/rsa/rsa_aid.c, containing proper AlgorithmIdentifiers
for known RSA+hash function combinations.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10557)
Use of the low level RSA functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11063)
RSA ASYM_CIPHER was already available within the default provider. We
now make it also available from inside the FIPS module.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10881)
It is better, safer and smaller to let the library routine handle the
strlen(3) call.
Added a note to the documentation suggesting this.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11019)
These fields are purely application data, and applications don't reach
into the bowels of the FIPS module, so these fields are never used
there.
Fixes#10835
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10837)
This also adds the missing accessor RSA_get0_pss_params(), so those
parameters can be included in the PKCS#8 data structure without
needing to know the inside of the RSA structure.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10394)
rsa_set0_all_params() is used to set all the primes, exponents and
coefficients. rsa_get0_all_params() is used to get all the primes,
exponents and coefficients.
"All" includes p, q, dP, dQ and qInv without making them separate.
All arrays of numbers are implemented as stacks to make dynamic use
easier.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10190)