The low level DH API has two functions for checking parameters:
DH_check_ex() and DH_check_params_ex(). The former does a "full" check,
while the latter does a "quick" check. Most importantly it skips the
check for a safe prime. We're ok without using safe primes here because
we're doing ephemeral DH.
Now that libssl is fully using the EVP API, we need a way to specify that
we want a quick check instead of a full check. Therefore we introduce
EVP_PKEY_param_check_quick() and use it.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14146)
Fixes#13969
- properly handle the mandatory RSA-PSS key parameters
- improve parameter checking when setting the parameters
- compute the algorithm id at the time it is requested so it
reflects the actual parameters set
- when generating keys do not override previously set parameters
with defaults
- tests added to the test_req recipe that should cover the PSS signature
handling
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13988)
The keydata argument of OSSL_FUNC_keymgmt_validate() should be read-only.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13201)
The keydata argument of OSSL_FUNC_keymgmt_has() should be read-only.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13200)
This change makes the naming more consistent, because three different terms
were used for the same thing. (The term libctx was used by far most often.)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
This stops them leaking into other namespaces in a static build.
They remain internal.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13013)
rsa_pss_params_30_fromdata() now uses the OSSL_PKEY_PARAM_RSA_DIGEST_PROPS parameter also.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12944)
SP800-56Br2 requires support for the RSA primitives for RSASVE generate and recover.
As these are simple KEM operations another operation type has been added that can support future extensions.
Added public functions EVP_PKEY_encapsulate_init(), EVP_PKEY_encapsulate(), EVP_PKEY_decapsulate_init() and EVP_PKEY_decapsulate()
Added EVP_KEM_* functions.
Added OSSL_FUNC_kem_* dispatch functions
Added EVP_PKEY_CTX_set_kem_op() so that different types of KEM can be added in the future. This value must currently be set to
"RSASVE" after EVP_PKEY_encapsulate_init() & EVP_PKEY_decapsulate_init() as there is no default value.
This allows the existing RSA key types, keymanagers, and encoders to be used with the encapsulation operations.
The design of the public API's resulted from contributions from @romen & @levitte.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12750)
The functions that check for the provider being runnable are: new, gen_init,
gen, gen_set_template, load, has, match, validate, import and export.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12801)
The new naming scheme consistently usese the `OSSL_FUNC_` prefix for all
functions which are dispatched between the core and providers.
This change includes in particular all up- and downcalls, i.e., the
dispatched functions passed from core to provider and vice versa.
- OSSL_core_ -> OSSL_FUNC_core_
- OSSL_provider_ -> OSSL_FUNC_core_
For operations and their function dispatch tables, the following convention
is used:
Type | Name (evp_generic_fetch(3)) |
---------------------|-----------------------------------|
operation | OSSL_OP_FOO |
function id | OSSL_FUNC_FOO_FUNCTION_NAME |
function "name" | OSSL_FUNC_foo_function_name |
function typedef | OSSL_FUNC_foo_function_name_fn |
function ptr getter | OSSL_FUNC_foo_function_name |
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12222)
For FIPS validation purposes - Automated Cryptographic Validation Protocol (ACVP) tests need to be
performed. (See https://github.com/usnistgov/ACVP). These tests are very similiar to the old CAVS tests.
This PR uses a hardwired subset of these test vectors to perform similiar operations,
to show the usage and prove that the API's are able to perform the required operations.
It may also help with communication with the lab (i.e- The lab could add a test here to show
a unworking use case - which we can then address).
The EVP layer performs these tests instead of calling lower level API's
as was done in the old FOM.
Some of these tests require access to internals that are not normally allowed/required.
The config option 'acvp_tests' (enabled by default) has been added so that this
access may be removed.
The mechanism has been implemented as additional OSSL_PARAM values that can be set and get.
A callback mechanism did not seem to add any additional benefit.
These params will not be added to the gettables lists.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11572)
This macro is used to determine if certain pieces of code should
become part of the FIPS module or not. The old name was confusing.
Fixes#11538
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11539)
Currently only RSA, EC and ECX are supported (DH and DSA need to be added to the keygen
PR's seperately because the fields supported have changed significantly).
The API's require the keys to be provider based.
Made the keymanagement export and get_params functions share the same code by supplying
support functions that work for both a OSSL_PARAM_BLD as well as a OSSL_PARAM[].
This approach means that complex code is not required to build an
empty OSSL_PARAM[] with the correct sized fields before then doing a second
pass to populate the array.
The RSA factor arrays have been changed to use unique key names to simplify the interface
needed by the user.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11365)
Since this is public, it is best to make the underlying structure opaque.
This means converting from stack allocation to dynamic allocation for all
usages.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11390)
The catalyst for this is the difficult of passing BNs through the other
OSSL_PARAM APIs.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11390)
Downgrading EVP_PKEYs from containing provider side internal keys to
containing legacy keys demands support in the EVP_PKEY_ASN1_METHOD.
This became a bit elaborate because the code would be almost exactly
the same as the import functions int EVP_KEYMGMT. Therefore, we end
up moving most of the code to common backend support files that can be
used both by legacy backend code and by our providers.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11375)
EVP_PKEY is rather complex, even before provider side keys entered the
stage.
You could have untyped / unassigned keys (pk->type == EVP_PKEY_NONE),
keys that had been assigned a type but no data (pk->pkey.ptr == NULL),
and fully assigned keys (pk->type != EVP_PKEY_NONE && pk->pkey.ptr != NULL).
For provider side keys, the corresponding states weren't well defined,
and the code didn't quite account for all the possibilities.
We also guard most of the legacy fields in EVP_PKEY with FIPS_MODE, so
they don't exist at all in the FIPS module.
Most of all, code needs to adapt to the case where an EVP_PKEY's
|keymgmt| is non-NULL, but its |keydata| is NULL.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11375)
Use of the low level RSA functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11063)
RSA ASYM_CIPHER was already available within the default provider. We
now make it also available from inside the FIPS module.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10881)
The same go for the pairs import + import_types and export + export_types.
This required some additional changes in our KEYMGMT implementations.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
Exporting data from a provider owned domainparams or key is quite an
ordeal, with having to figure out what parameter keys an
implementation supports, call the export function a first time to find
out how large each parameter buffer must be, allocate the necessary
space for it, and call the export function again.
So how about letting the export function build up the key data params
and call back with that? This change implements exactly such a
mechanism.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10414)
