The keydata argument of OSSL_FUNC_keymgmt_validate() should be read-only.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13201)
This removes a TODO.
This function is not needed since any place that needs to do the
conversion normally has a special case name2nid table.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13202)
The keydata argument of OSSL_FUNC_keymgmt_has() should be read-only.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13200)
Also deprecate EVP_PKEY_get1_tls_encodedpoint().
The preferred alternative is EVP_PKEY_set1_encoded_public_key() and
EVP_PKEY_get1_encoded_public_key().
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13105)
We do the same thing for the "get1" version. In reality this has broader
use than just TLS (it can also be used in CMS), and "encodedpoint" only
makes sense when you are talking about EC based algorithms.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13105)
This change makes the naming more consistent, because three different terms
were used for the same thing. (The term libctx was used by far most often.)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
These were previously added as an internal API. But since the CMS code
needs them, other code might do too.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13088)
Note that with this commit the optional parameter is introduced, but
libssl still ignores it.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13018)
This adds OSSL_ENCODER_to_data() and OSSL_DECODER_from_data(). These
functions allow fairly simple rewrites of type-specific i2d and d2i
calls.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13094)
Add PKCS7_get_octet_string() and PKCS7_type_is_other() to the public interface.
Fixes#11139
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13059)
There is some data that is very difficult to guess. For example, DSA
parameters and X9.42 DH parameters look exactly the same, a SEQUENCE
of 3 INTEGER. Therefore, callers may need the possibility to select
the exact keytype that they expect to get.
This will also allow use to translate d2i_TYPEPrivateKey(),
d2i_TYPEPublicKey() and d2i_TYPEParams() into OSSL_DECODER terms much
more smoothly.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13061)
The previous commit ran an automated rename throughout the codebase.
There are a small number of things it didn't quite get right so we fix
those in this commit.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12970)
Automatically rename all instances of _with_libctx() to _ex() as per
our coding style.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12970)
Fixes#12635
As discussed in the issue, supporting the set0-like semantics long-term is not necessarily desirable, although necessary for short-term compatibility concerns. So I've deprecated the original method and added an equivalent that is explicitly labelled as set1.
I tried to audit existing usages of the (now-deprecated) API and update them to use set1 if that appeared to align with their expectations.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12917)
Added Keymanager, signatures, kem, asymciphers and keyexchange.
Added -select option so that specific algorithms are easier to view when using -verbose
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12943)
This also deprecates the function, as it is not necessary any more,
and should fall out of use.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12920)
ECX_KEY was not meant for public consumption, it was only to be
accessed indirectly via EVP routines. However, we still need internal
access for our decoders.
This partially reverts 7c664b1f1bFixes#12880
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12956)
The original names were more intuitive: the generate_counter counts the
number of generate requests, and the reseed_counter counts the number
of reseedings (of the principal DRBG).
reseed_gen_counter -> generate_counter
reseed_prop_counter -> reseed_counter
This is the anologue to commit 8380f453ec on the 1.1.1 stable branch.
The only difference is that the second renaming has already been reverted
on the master branch.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12941)
This permits the default trio of DRBGs to have their type and parameters set
using configuration.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12931)
This commit changes the man page for OSSL_DECODER_CTX_new by removing
the OPENSSL_CTX parameter which matches the declaration in decoder.h.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12935)
This is required before the RAND/DRBG framework can be made user mutable.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12904)
EVP_MAC_final had only three arguments / the buffer/tag size was missing.
Fixes#12424
Note, that I didn't try to compile the example to look for other problems.
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12429)
Mostly source nits, but also removing a couple of OSSL_DECODER_PARAM
macros that are never used or even make sense.
Also, some function names weren't quite consistent. They were made a
bit more consistent in the OSSL_ENCODER API, now we bring that back to
OSSL_DECODER.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12873)
This adds the convenience function EVP_PKEY_typenames_do_all(), which
does the same as EVP_KEYMGMT_names_do_all(), but without having to
expose all the internal ways to find out if the internal EVP_PKEY key
is legacy or provider-native.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12873)
OSSL_ENCODER was developed before OSSL_DECODER, so the idea of
chaining and the resulting API came later. This series of changes
brings the same sort of API and functionality back to OSSL_ENCODER,
making the two APIs more consistent with each other.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12873)
This is part of an effort to make OSSL_ENCODER work more like OSSL_DECODER.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12873)
SP800-56Br2 requires support for the RSA primitives for RSASVE generate and recover.
As these are simple KEM operations another operation type has been added that can support future extensions.
Added public functions EVP_PKEY_encapsulate_init(), EVP_PKEY_encapsulate(), EVP_PKEY_decapsulate_init() and EVP_PKEY_decapsulate()
Added EVP_KEM_* functions.
Added OSSL_FUNC_kem_* dispatch functions
Added EVP_PKEY_CTX_set_kem_op() so that different types of KEM can be added in the future. This value must currently be set to
"RSASVE" after EVP_PKEY_encapsulate_init() & EVP_PKEY_decapsulate_init() as there is no default value.
This allows the existing RSA key types, keymanagers, and encoders to be used with the encapsulation operations.
The design of the public API's resulted from contributions from @romen & @levitte.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12750)
The function returns 1 when the encoding of a decoded EC key used
explicit encoding of the curve parameters.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12683)
Adds documentation for EVP_PKEY_get0_first_alg_name() and
EVP_KEYMGMT_get0_first_name().
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12850)
SP800-56br2 requires seperate KAT's (fips self tests) to be tested for both encryption and decryption
using the RSA primitive (i.e. no padding). This is specified in FIPS140-2 IG D.9
A copy of the methods EVP_PKEY_encrypt_init(), EVP_PKEY_encrypt(), EVP_PKEY_decrypt_init(), EVP_PKEY_decrypt()
are now in the fips module.
Removed the #ifdef FIPS_MODULE in evp_pkey_ctx_free_old_ops().
Added corruption test
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12835)
This is purely to allow exporting without having to repeatedly specify
the keymgmt and keydata from the EVP_PKEY.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12853)
Remove references to 'macro' from EVP_PKEY_CTX_ctrl() as they are all
functions now, and update the HISTORY section.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12853)
When generating a CRL using the "ca" utility, allow values for the
lastUpdate and nextUpdate fields to be specified using the command line
options -crl_lastupdate and -crl_nextupdate respectively.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12784)
add various checks for malformedness to static check_chain_extensions() in x509_vfc.c
improve error reporting of X509v3_cache_extensions() in v3_purp.c
add error reporting to x509_init_sig_info() in x509_set.c
improve static setup_dp() and related functions in v3_purp.c and v3_crld.c
add test case for non-conforming cert from https://tools.ietf.org/html/rfc8410#section-10.2
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12478)
If a path is specified with the -module option it will use this path to load the library when the provider is activated,
instead of also having to set the environment variable OPENSSL_MODULES.
Added a platform specific opt_path_end() function that uses existing functionality used by opt_progname().
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12761)
* Use strenghtened cert chain building, verifying chain using optional trust store
while making sure that no certificate status (e.g., CRL) checks are done
* Use OSSL_CMP_certConf_cb() by default and move its doc to OSSL_CMP_CTX_new.pod
* Simplify certificate and cert store loading in apps/cmp.c
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12741)
PEM_write_bio_PrivateKey_traditional() didn't handle provider-native
keys very well. Originally, it would simply use the corresponding
encoder, which is likely to output modern PEM (not "traditional").
PEM_write_bio_PrivateKey_traditional() is now changed to try and get a
legacy copy of the input EVP_PKEY, and use that copy for traditional
output, if it has such support.
Internally, evp_pkey_copy_downgraded() is added, to be used when
evp_pkey_downgrade() is too intrusive for what it's needed for.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12738)
Add the AuthEnvelopedData as defined in RFC 5083 with AES-GCM
parameter as defined in RFC 5084.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8024)
The example to create an EC key from user data didn't show what one
could expect and application to do, especially with regard to how it's
done with raw EC functions. We therefore refactor it to make proper
use of a BIGNUM where expected, and also use OSSL_PARAM_BLD(3) for
easier handling of the OSSL_PARAM array.
Fixes#12388
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12389)
* Add -own_trusted option to CMP app
* Add OSSL_CMP_CTX_build_cert_chain()
* Add optional trust store arg to ossl_cmp_build_cert_chain()
* Extend the tests in cmp_protect_test.c and the documentation accordingly
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12791)
From this point on, this engine must be specifically specified.
To replace the internal EMBEDDED hack with something unique for the
new module, functions to create application specific OSSL_STORE_INFO
types were added.
Furthermore, the following function had to be exported:
ossl_do_blob_header()
ossl_do_PVK_header()
asn1_d2i_read_bio()
Finally, evp_pkcs82pkey_int() has become public under a new name,
EVP_PKCS82PKEY_with_libctx()
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12587)
Include more information about the new HMAC parameter. Also fill in some
missing documentation about the EVP_PKEY MAC bridge.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12732)
* In the cmp app so far the -verbosity option had been missing.
* Extend log output helpful for debugging CMP applications
in setup_ssl_ctx() of the cmp app, ossl_cmp_msg_add_extraCerts(),
OSSL_CMP_validate_msg(), and OSSL_CMP_MSG_http_perform().
* Correct suppression of log output with insufficient severity.
* Add logging/severity level OSSL_CMP_LOG_TRACE = OSSL_CMP_LOG_MAX.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12739)
CLA: trivial
Correct right shift to left shift.
Pseudo code `a&=~((~0)>>n)` means "get higher n-bits of a", but actually crypto lib gives lower n-bits.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12727)
Add an option to configuration files "config_diagnostics" that when set to a
non-zero value, overrides the error ignoring flags. The outcome is that
diagnostic option is produced when e.g. sections are missing.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12663)
This adds a flag, OCSP_PARTIAL_CHAIN, to the OCSP_basic_verify()
function. This is equivlent to X509_V_FLAG_PARTIAL_CHAIN, in that
if any certificate in the OCSP response is in the trust store, then
trust it.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12666)
This adds the needed code to make the OSSL_STORE API functions handle
provided STORE implementations.
This also modifies OSSL_STORE_attach() for have the URI, the
library context and the properties in the same order as
OSSL_STORE_open_with_libctx().
The most notable change, though, is how this creates a division of
labor between libcrypto and any storemgmt implementation that wants to
pass X.509, X.509 CRL, etc structures back to libcrypto. Since those
structures aren't directly supported in the libcrypto <-> provider
interface (asymmetric keys being the only exception so far), we resort
to a libcrypto object callback that can handle passed data in DER form
and does its part of figuring out what the DER content actually is.
This also adds the internal x509_crl_set0_libctx(), which works just
like x509_set0_libctx(), but for X509_CRL.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12512)
This makes it possible to use OSSL_DECODER in functions that are passed
a OSSL_PASSPHRASE_CALLBACK already.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12512)
When some function receives an OSSL_PARAM array to pilfer for data,
and there is a string of some sort, and all the code needs is to get
the pointer to the data, rather than a copy, there is currently no
other way than to use |param->data| directly. This is of course a
valid method, but lacks any safety check (is |param->data_type|
correct, for example?).
OSSL_PARAM_get_utf8_string_ptr() and OSSL_PARAM_get_octet_string_ptr()
helps the programmer with such things, by setting the argument pointer
to |param->data|.
Additionally, the handle the data types OSSL_PARAM_UTF8_PTR and
OSSL_PARAM_OCTET_PTR as well.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12512)
This includes fixing a bug that could only be discovered when no
loaders were registered.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12512)
This is placed as CORE because the core of libcrypto is the authority
for what is possible to do and what's required to make these abstract
objects work.
In essence, an abstract object is an OSSL_PARAM array with well
defined parameter keys and values:
- an object type, which is a number indicating what kind of
libcrypto structure the object in question can be used with. The
currently possible numbers are defined in <openssl/core_object.h>.
- an object data type, which is a string that indicates more closely
what the contents of the object are.
- the object data, an octet string. The exact encoding used depends
on the context in which it's used. For example, the decoder
sub-system accepts any encoding, as long as there is a decoder
implementation that takes that as input. If central code is to
handle the data directly, DER encoding is assumed. (*)
- an object reference, also an octet string. This octet string is
not the object contents, just a mere reference to a provider-native
object. (**)
- an object description, which is a human readable text string that
can be displayed if some software desires to do so.
The intent is that certain provider-native operations (called X
here) are able to return any sort of object that belong with other
operations, or an object that has no provider support otherwise.
(*) A future extension might be to be able to specify encoding.
(**) The possible mechanisms for dealing with object references are:
- An object loading function in the target operation. The exact
target operation is determined by the object type (for example,
OSSL_OBJECT_PKEY implies that the target operation is a KEYMGMT)
and the implementation to be fetched by its object data type (for
an OSSL_OBJECT_PKEY, that's the KEYMGMT keytype to be fetched).
This loading function is only useful for this if the implementations
that are involved (X and KEYMGMT, for example) are from the same
provider.
- An object exporter function in the operation X implementation.
That exporter function can be used to export the object data in
OSSL_PARAM form that can be imported by a target operation's
import function. This can be used when it's not possible to fetch
the target operation implementation from the same provider.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12512)
This was added for backward compatability.
Added EC_GROUP_new_from_params() that supports explicit curve parameters.
This fixes the 15-test_genec.t TODO.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12604)
Also remove not really to-the-point error message if call fails in apps/cmp.c
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11808)
allows loading password-protected PKCS#12 files in x509, ca, s_client, s_server
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12647)
PEM_read_bio_PUBKEY_ex() and PEM_read_bio_Parameters_ex() are added to
complete PEM_read_bio_PrivateKey_ex(). They are all refactored to be
wrappers around the same internal function.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12673)
While public keys and private keys use the same type (EVP_PKEY), just
with different contents, callers still need to distinguish between the
two to be able to know what functions to call with them (for example,
to be able to choose between EVP_PKEY_print_private() and
EVP_PKEY_print_public()).
The OSSL_STORE backend knows what it loaded, so it has the capacity to
inform.
Note that the same as usual still applies, that a private key EVP_PKEY
contains the public parts, but not necessarily the other way around.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12673)
Just like d2i_PrivateKey() / d2i_PrivateKey_ex(), there's a need to
associate an EVP_PKEY extracted from a PUBKEY to a library context and
a property query string. Without it, a provider-native EVP_PKEY can
only fetch necessary internal algorithms from the default library
context, even though an application specific context should be used.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12671)
If an attempt is made to load a provider and it fails, the fall-back mechanism
should be disabled to prevent the user getting some weird happening. E.g. a
failure to load the FIPS provider should not allow the default to load as a
fall-back.
The OSSL_PROVIDER_try_load() call has been added, to allow a provider to be
loaded without disabling the fall-back mechanism if it fails.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12625)
This KDF is defined in RFC7292 in appendix B. It is widely used in PKCS#12
and should be provided.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12624)
Also, document its unusual semantics of resetting the
cipher list (but preserving other configuration).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/7274)
Including the ones that were added in commit
83b0634702 with a note that they "may go
away" and are now deprecated.
Remove the missingcrypto.txt entries for the now-deprecated functions.
[extended tests]
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12233)
Some modes (e.g., CBC and OFB) update the effective IV with each
block-cipher invocation, making the "IV" stored in the (historically)
EVP_CIPHER_CTX or (current) PROV_CIPHER_CTX distinct from the initial
IV passed in at cipher initialization time. The latter is stored in
the "oiv" (original IV) field, and has historically been accessible
via the EVP_CIPHER_CTX_original_iv() API. The "effective IV" has
also historically been accessible, via both EVP_CIPHER_CTX_iv()
and EVP_CIPHER_CTX_iv_noconst(), the latter of which allows for
*write* access to the internal cipher state. This is particularly
problematic given that provider-internal cipher state need not, in
general, even be accessible from the same address space as libcrypto,
so these APIs are not sustainable in the long term. However, it still
remains necessary to provide access to the contents of the "IV state"
(e.g., when serializing cipher state for in-kernel TLS); a subsequent
reinitialization of a cipher context using the "IV state" as the
input IV will be able to resume processing of data in a compatible
manner.
This problem was introduced in commit
089cb623be, which effectively caused
all IV queries to return the "original IV", removing access to the
current IV state of the cipher.
These functions for accessing the (even the "original") IV had remained
undocumented for quite some time, presumably due to unease about
exposing the internals of the cipher state in such a manner.
Note that this also as a side effect "fixes" some "bugs" where things
had been referring to the 'iv' field that should have been using the
'oiv' field. It also fixes the EVP_CTRL_GET_IV cipher control,
which was clearly intended to expose the non-original IV, for
use exporting the cipher state into the kernel for kTLS.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12233)
Similiar to ecdh this supports the legacy kdf inside the provider dh key exchange.
The supporting EVP_PKEY_CTX macros have been changed into mehtods and moved into dh_ctrl.c
New kdfs such as SSKDF should be done as a seperate pass after doing the derive.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12575)
Following the previous commits where we moved the KDF bridge into
provider side code, we need to update the documentation accordingly.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12573)
The default and legacy providers currently return 1 for status and self test checks.
Added test to show the 3 different stages the self test can be run (for installation, loading and on demand).
For the fips provider:
- If the on demand self test fails, then any subsequent fetches should also fail. To implement this the
cached algorithms are flushed on failure.
- getting the self test callback in the fips provider is a bit complicated since the callback hangs off the core
libctx (as it is set by the application) not the actual fips library context. Also the callback can be set at
any time not just during the OSSL_provider_init() so it is calculated each time before doing any self test.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11752)
-Added EVP_SignFinal_with_libctx() and EVP_VerifyFinal_with_libctx()
-Renamed EVP_DigestSignInit_ex() and EVP_DigestVerifyInit_with_libctx() to
EVP_DigestSignInit_with_libctx() and EVP_DigestVerifyInit_with_libctx()
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11884)
-Public PKCS7 methods that create a PKCS7 object now have variants that also add a libctx and propq.
This includes PKCS7_new_with_libctx(), PKCS7_sign_with_libctx() and PKCS7_encrypt_with_libctx()
-Added SMIME_read_PKCS7_ex() so that a created PKCS7 object can be passed to the read.
-d2i_PKCS7_bio() has been modified so that after it loads the PKCS7 object it then resolves any subobjects that require
the libctx/propq (such as objects containing X509 certificates).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11884)
-Public CMS methods that create a CMS_ContentInfo object now have variants that also add a libctx and propq.
This includes CMS_ContentInfo_new_with_libctx(), CMS_sign_with_libctx(), CMS_data_create_with_libctx(),
CMS_digest_create_with_libctx(), CMS_EncryptedData_encrypt_with_libctx(), CMS_EnvelopedData_create_with_libctx().
-Added CMS_ReceiptRequest_create0_with_libctx().
-Added SMIME_read_CMS_ex() so that a new CMS_ContentInfo object (created using CMS_ContentInfo_new_with_libctx()) can
be passed to the read.
-d2i_CMS_bio() has been modified so that after it loads the CMS_ContentInfo() it then resolves any subobjects that require
the libctx/propq (such as objects containing X509 certificates).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11884)
The RAND_DRBG API did not fit well into the new provider concept as
implemented by EVP_RAND and EVP_RAND_CTX. The main reason is that the
RAND_DRBG API is a mixture of 'front end' and 'back end' API calls
and some of its API calls are rather low-level. This holds in particular
for the callback mechanism (RAND_DRBG_set_callbacks()) and the RAND_DRBG
type changing mechanism (RAND_DRBG_set()).
Adding a compatibility layer to continue supporting the RAND_DRBG API as
a legacy API for a regular deprecation period turned out to come at the
price of complicating the new provider API unnecessarily. Since the
RAND_DRBG API exists only since version 1.1.1, it was decided by the OMC
to drop it entirely.
Other related changes:
Use RNG instead of DRBG in EVP_RAND documentation. The documentation was
using DRBG in places where it should have been RNG or CSRNG.
Move the RAND_DRBG(7) documentation to EVP_RAND(7).
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12509)
Fixes#11672
Add "-legacy" option to load the legacy provider and
fall back to the old legacy default algorithms.
doc/man1/openssl-pkcs12.pod.in: updates documentation about the new
"-legacy" option
Signed-off-by: Sahana Prasad <sahana@redhat.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12540)
