We move the old ssl3_get_record function to conform with the new record
layer design.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This transfers the low level function ssl3_read_n to the new record layer.
We temporarily make the read_n function a top level record layer function.
Eventually, in later commits in this refactor, we will remove it as a top
level function and it will just be called from read_record.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Code signing certificates have other properties as for example described in
CA Browser Forum documents. This leads to "unsupported certificate purpose" errors when
verifying signed objects.
This patch adds the purpose "codesign" to the table in X.509 certificate verification and
the verification parameter "code_sign" to X509_VERIFY_PARAM.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18567)
This prevents misuses creeping in.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18882)
Fixes#16721
This uses AES-ECB to create a counter mode AES-CTR32 (32bit counter, I could
not get AES-CTR to work as-is), and GHASH to implement POLYVAL. Optimally,
there would be separate polyval assembly implementation(s), but the only one
I could find (and it was SSE2 x86_64 code) was not Apache 2.0 licensed.
This implementation lives only in the default provider; there is no legacy
implementation.
The code offered in #16721 is not used; that implementation sits on top of
OpenSSL, this one is embedded inside OpenSSL.
Full test vectors from RFC8452 are included, except the 0 length plaintext;
that is not supported; and I'm not sure it's worthwhile to do so.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18693)
This adds functions for encoding and decoding QUIC frames.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18795)
We introduce a new BIO ctrl that switches a BIO_s_mem() into datagram
mode. Packet boundaries are respected.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18596)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18840)
Also add early clobber for two-insn bswap.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18827)
Also change ossl_cmp_ctx_set0_validatedSrvCert() to ossl_cmp_ctx_set1_validatedSrvCert(),
and add respective tests as well as the -srvcertout CLI option using the new function.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18656)
Introducing the concept of reserving the store where a number of
provided operation methods are to be stored.
This avoids racing when constructing provided methods, which is
especially pertinent when multiple threads are trying to fetch the
same method, or even any implementation for the same given operation
type.
This introduces a |biglock| in OSSL_METHOD_STORE, which is separate
from the |lock| which is used for more internal and finer grained
locking.
Fixes#18152
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18153)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18668)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18668)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18668)
Longer private key sizes unnecessarily raise the cycles needed to
compute the shared secret without any increase of the real security.
We use minimum key sizes as defined in RFC7919.
For arbitrary parameters we cannot know whether they are safe
primes (we could test but that would be too inefficient) we have
to keep generating large keys.
However we now set a small dh->length when we are generating safe prime
parameters because we know it is safe to use small keys with them.
That means users need to regenerate the parameters if they
want to take the performance advantage of small private key.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18480)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18667)
When assigning pointers to functions in an OSSL_DISPATCH table, we try
to ensure that those functions are properly defined or declared with
an extra declaration using the corresponding function typedefs that
are defined by include/openssl/core_dispatch.h.
For the core dispatch table, found in crypto/provider_core.c, it seems
we forgot this habit, and thus didn't ensure well enough that the
function pointers that are assigned in the table can actually be used
for those dispatch table indexes.
This change adds all the missing declarations, and compensates for
differences with functions that do the necessary casting, making those
explicit rather than implicit, thereby trying to assure that we know
what we're doing.
One function is not fixed in this change, because there's a controversy,
a clash between the signature of BIO_ctrl() and OSSL_FUNC_BIO_ctrl_fn.
They have different return types.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18198)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18294)
Fixed#18489
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18550)
Also document CMS_decrypt_set1_password() and fix CMS_EnvelopedData_create.pod.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18301)
Add objects from ETSI-specification(s) used in CAdES processing.
Main document referenced is ETSI EN 319 122-1 V1.2.1.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18655)
And move ROTATE inline asm to header.
Now this benefits SM3, SHA (when with Zbb only and no Zknh)
and other hash functions
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18287)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18490)
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18429)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18386)
+ Always undef the symbols that may have been #define-d
by wincrypt.h after the first inclusion of types.h to
avoid errors from wincrypt.h symbols being used to
compile OpenSSL code
+ Also need to remove #pragma once for this approach to work
+ Define WINCRYPT_USE_SYMBOL_PREFIX to enable wincrypt
symbol prefix at some point in future
Fixes#9981
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/18131)
Rather than relying on the locale code working, instead implement these
functions directly.
Fixes#18322
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/18344)
This improves the performance of this function and the ones that rely on it
(ossl_lh_strcasehash primarily).
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/18344)
These routines make use of the rev8 instruction in the Zbb extension
to accelerate byte-swapping when OpenSSL is built specifically for
a machine that supports Zbb.
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Henry Brausen <henry.brausen@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17640)
RISC-V cpuid implementation allows bitmanip extensions Zb[abcs] to
be enabled at runtime using OPENSSL_riscvcap environment variable.
For example, to specify 64-bit RISC-V with the G,C,Zba,Zbb,Zbc
extensions, one could write: OPENSSL_riscvcap="rv64gc_zba_zbb_zbc"
Architecture string parsing is still very primitive, but can be
expanded in the future. Currently, only bitmanip extensions Zba, Zbb,
Zbc and Zbs are supported.
Includes implementation of constant-time CRYPTO_memcmp in riscv64 asm,
as well as OPENSSL_cleanse. Assembly implementations are written using
perlasm.
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Henry Brausen <henry.brausen@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17640)
This commit removes platform defines the interfere with loading and resolution
of platform and memory model variants of integer types and includes the
appropriate files, stdint.h and sys/types.h where the types are defined.
Fixes#17669
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18325)
Otherwise the implementation is unnecessarily duplicated in legacy.so.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18282)
It also allows for passing -DOPENSSL_NO_LOCALE as a workaround
to ./Configure command.
Fixes#18233
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18282)
C++20 adds 'header units' as a stepping-stone to modules. Header
units are regular header-files that have a 'self-contained' property
-- they do not require previously-included headers to provide typedefs
and what not.
This addresses 2 problems discovered when using clang modules (as a
proxy for C++20 header-units).
a) Some headers that pay attention to OPENSSL_NO_STDIO to determine
whether to declare certain FILE*-taking functions do not #include
<stdio.h> themselves, relying on their includer already having done
that. That breaks the above mentioned encapuslation requirement.
Fixed by conditionally including stdio.h in those headers. I chose to
always include stdio.h in such headers, even when they included
another such header that transitively included stdio. That way they
do not rely on an artifact of that intermediate header's behaviour.
b) Some headers have #includes inside 'extern "C" { ... }' regions.
That has a bad code-smell, but GCC and clang have extensions to permit
it with implementation-defined effects. Clang needs annotation on the
included files to know that they themselves are entirely inside a
similar region. GCC behavesq as-if there's an extern "C++" region
wrapping the included header (which must therefore wrap its contents
in extern "C", if that is what it wants. In effect the includer's
extern "C" region is just misleading. I didn't audit all the headers
for this, only those I noticed when addressing #a.
\#a is necessary to build the headers as a set of clang-modules. #b
is not necessary, but as I mentioned, avoids potentially
implementation-defined behaviour.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18221)
These functions are unused and untested. They are also implemented rather
inefficiently. If we ever needed them in the future, they'd almost surely
need to be rewritten more efficiently.
Fixes#18227
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18237)
evp_method_store_flush() and evp_method_store_remove_all_provided()
only cover EVP operations, but not encoders, decoders and store loaders.
This adds corresponding methods for those as well. Without this, their
method stores are never cleaned up when the corresponding providers are
deactivated or otherwise modified.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18151)
This adds ossl_method_store_remove_all_provided(), which selectively
removes methods from the given store that are provided by the given
provider.
This also adds the EVP specific evp_method_store_remove_all_provided(),
which matches ossl_method_store_remove_all_provided() but can also
retrieve the correct store to manipulate for EVP functions.
This allows us to modify ossl_provider_self_test() to do the job it's
supposed to do, but through clearly defined functions instead of a
cache flushing call that previously did more than that.
ossl_provider_deactivate() is also modified to remove methods associated
with the deactivated provider, and not just clearing the cache.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18151)
When evp_method_store_flush() flushed the query cache, it also freed
all methods in the EVP method store, through an unfortunate call of
ossl_method_store_flush_cache() with an argument saying that all
methods should indeed be dropped.
To undo some of the confusion, ossl_method_store_flush_cache() is
renamed to ossl_method_store_cache_flush_all(), and limited to do
only that. Some if the items in the internal ALGORITHM structure are
also renamed and commented to clarify what they are for.
Fixes#18150
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18151)
The existing pre- and post-condition functions are supposed to check if
methods have already been created and stored, using provider operation
bits. This is supposed to only be done for "permanent" method stores.
However, the way the pre-condition was called, it could not know if the
set of implementations to be stored is likely to end up in a "permanent"
or a temporary store. It needs access to the |no_store| flag returned
by the provider's operation query function, because that call was done
after the pre-condition was called.
This requires a bit of refactoring, primarly of |algorithm_do_this()|,
but also of |ossl_method_construct_precondition()|.
Fixes#18150
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18151)
This is a misused function, as it was called during query cache flush,
when the provider operation bits were meant to record if methods for a
certain operation has already been added to the method store.
Fixes#18150
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18151)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/15778)
Fixes#16947
Also refactor out algctx freeing into a separate function.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18105)
This patch optimizes SM4 for ARM processor using ASIMD instruction
It will improve performance if both of following conditions are met:
1) Input data equal to or more than 4 blocks
2) Cipher mode allows parallelism, including ECB,CTR,GCM or CBC decryption
This patch implements SM4 SBOX lookup in vector registers, with the
benefit of constant processing time over existing C implementation.
It is only enabled for micro-architecture N1/V1. In the ideal scenario,
performance can reach up to 2.7X
When either of above two conditions is not met, e.g. single block input
or CFB/OFB mode, CBC encryption, performance could drop about 50%.
The assembly code has been reviewed internally by ARM engineer
Fangming.Fang@arm.com
Signed-off-by: Daniel Hu <Daniel.Hu@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17951)
Currently we do not have any way to retrieve these values once set.
Fixes#18035.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18038)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18031)
The functions used from ocsp.h are actually just aliases
for functions from http.h. Use them directly to avoid
including ocsp.h.
Fixes openssl#17148
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17980)
CLI changes: New parameter -digest to CLI command openssl cms, to
provide pre-computed digest for use with -sign.
API changes: New function CMS_final_digest(), like CMS_final() but
uses a pre-computed digest instead of computing it from the data.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/15348)
This refactors OSSL_LIB_CTX to avoid using CRYPTO_EX_DATA. The assorted
objects to be managed by OSSL_LIB_CTX are hardcoded and are initialized
eagerly rather than lazily, which avoids the need for locking on access
in most cases.
Fixes#17116.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17881)
This function takes arguments a & b and computes a / b rounding any
remainder up.
It is safe with respect to overflow and negative inputs. It's only fast for
non-negative inputs.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17884)
Provide a different mechanism to indicate that the application wants
to retry the verification. The negative result of the callback function
now indicates an error again.
Instead the SSL_set_retry_verify() can be called from the callback
to indicate that the handshake should be suspended.
Fixes#17568
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17825)
Partial fix for #17064. Avoid excessive writes to the cache line
containing the refcount for an EVP_MD object to avoid extreme
cache contention when using a single EVP_MD at high frequency on
multiple threads. This changes performance in 3.0 from being double
that of 1.1 to only slightly higher than that of 1.1.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17857)
Supports Linux, MacOS and FreeBSD
Disabled by default, enabled via `enabled-tfo`
Some tests
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8692)
This header files are included by multiple other headers.
It's better to add define guards to prevent multi-inclusion.
Adhere to the coding style, all preprocessor directives inside
the guards gain a space.
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/17666)
Fixes#13944
Moved "opt_printf_stderr" out of apps.c to avoid duplicate definition in tests.
Added function "asn1_string_to_time_t" including tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17645)
This problem happens usually because an application
links libcrypto and/or libssl statically which
installs an atexit handler, but later an engine using
a shared instance of libcrypto is installed.
The problem is in simple words that both instances
of libcrypto have an atexit handler installed,
but both are unable to coordinate with each other,
which causes a crash, typically a use-after-free
in the engine's destroy function.
Work around that by preventing the engine's
libcrypto to install the atexit handler.
This may result in a small memory leak, but that
memory is still reachable.
Fixes#15898
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17112)
Including e_os.h with a path from a header file doesn't work well on
certain exotic platform. It simply fails to build.
Since we don't seem to be able to stop ourselves, the better move is
to move e_os.h to an include directory that's part of the inclusion
path given to the compiler.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17641)
FreeBSD's kernel TLS supports Chacha20 for both TLS 1.2 and TLS 1.3.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13752)
CLA: trivial
To get the master branch compiled with DJGPP some minor
adjustments are required. They will have no impact on any other ports.
The DJGPP port uses the Watt-32 library to provide the required network
functionality and some of its headers need to be included.
Neither DJGPP nor the Watt-32 library provide in_addr_t thus it must be
provided as it is done for OPENSSL_SYS_WINDOWS in crypto/bio/b_addr.c.
In the DJGPP section of include/internal/sockets.h the following Watt-32
headers must be added:
- arpa/inet.h: to provide declaration of inet_ntoa required in crypto/bio/b_addr.c
- netinet/tcp.h: to provide defintion of TCP_NODELAY required in crypto/bio/b_sock2.c
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17623)
Add copyright to files that were missing it.
Update license from OpenSSL to Apache as needed.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17606)
The private key for rsa, dsa, dh and ecx was being included when the
selector was just the public key. (ec was working correctly).
This matches the documented behaviour.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17200)
The function/macro allow user get groups/extensions without memory allcations.
So we could calculate the ssl fignerprint(ja3) in low cost.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16910)
Increase the block numbers to 8 for every iteration. Increase the hash
table capacity. Make use of EOR3 instruction to improve the performance.
This can improve performance 25-40% on out-of-order microarchitectures
with a large number of fast execution units, such as Neoverse V1. We also
see 20-30% performance improvements on other architectures such as the M1.
Assembly code reviewd by Tom Cosgrove (ARM).
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15916)
Assembly code reviewed by Shricharan Srivatsan <ssrivat@us.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16854)
Also add comment to the public header to avoid
making another conflict in future.
Fixes#17545
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17546)
This adds the functions BN_signed_bin2bn(), BN_signed_bn2bin(),
BN_signed_lebin2bn(), BN_signed_bn2lebin(), BN_signed_native2bn(),
and BN_signed_bn2native(), all essentially doing the same job as
BN_bin2bn(), BN_bn2binpad(), BN_lebin2bn(), BN_bn2lebinpad(),
BN_native2bn(), and BN_bn2nativepad(), except that the 'signed'
ones operate on signed number bins in 2's complement form.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17139)
This patch implements the SM4 optimization for ARM processor,
using SM4 HW instruction, which is an optional feature of
crypto extension for aarch64 V8.
Tested on some modern ARM micro-architectures with SM4 support, the
performance uplift can be observed around 8X~40X over existing
C implementation in openssl. Algorithms that can be parallelized
(like CTR, ECB, CBC decryption) are on higher end, with algorithm
like CBC encryption on lower end (due to inter-block dependency)
Perf data on Yitian-710 2.75GHz hardware, before and after optimization:
Before:
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
SM4-CTR 105787.80k 107837.87k 108380.84k 108462.08k 108549.46k 108554.92k
SM4-ECB 111924.58k 118173.76k 119776.00k 120093.70k 120264.02k 120274.94k
SM4-CBC 106428.09k 109190.98k 109674.33k 109774.51k 109827.41k 109827.41k
After (7.4x - 36.6x faster):
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
SM4-CTR 781979.02k 2432994.28k 3437753.86k 3834177.88k 3963715.58k 3974556.33k
SM4-ECB 937590.69k 2941689.02k 3945751.81k 4328655.87k 4459181.40k 4468692.31k
SM4-CBC 890639.88k 1027746.58k 1050621.78k 1056696.66k 1058613.93k 1058701.31k
Signed-off-by: Daniel Hu <Daniel.Hu@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17455)
EVP_MD_CTX_FLAG_NON_FIPS_ALLOW macro is obsolete and unused from
openssl-3.0 onwards
CLA: trivial
Signed-off-by: Shreenidhi Shedi <sshedi@vmware.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17484)
On non-Windows systems, there's no difference at all. On Windows systems,
__declspec(dllexport) is added, which ensures it gets exported no matter
what.
Fixes#17203
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17215)
The passphrase callback data was not properly initialized.
Fixes#17054
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17181)
When the parameter definition has the data type OSSL_PARAM_UNSIGNED_INTEGER,
negative input values should not be accepted.
Fixes#17103
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17104)
We should stop receiving child callbacks if we're about to free up
the child libctx. Otherwise we can get callbacks when the libctx is half
freed up.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16980)
If a provider doesn't have any child providers then there is no need
to attempt to remove them - so we should not do so. This removes some
potentialy thread races.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16980)
Define a number of helper functions that ease the difficulty of detecting
integer overflows.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16930)
These are legacy of older versions of the code and are currently not used
anywhere.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16985)
This fixes "undefined reference to `aes_gcm_dec_128_kernel' in function
`armv8_aes_gcm_decrypt'" and similar
Fixes#16949
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16951)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16918)
This mostly entails passing around a provider pointer, and handling
queries that includes a pointer to a provider, where NULL means "any".
This also means that there's a need to pass the provider pointer, not
just down to the cache functions, but also be able to get it from
ossl_method_store_fetch(). To this end, that function's OSSL_PROVIDER
pointer argument is modified to be a pointer reference, so the
function can answer back what provider the method comes from.
Test added.
Fixes#16614
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16725)
In all initializing functions for functionality that use an EVP_PKEY, the
coded logic was to find an KEYMGMT implementation first, and then try to
find the operation method (for example, SIGNATURE implementation) in the
same provider.
This implies that in providers where there is a KEYMGMT implementation,
there must also be a SIGNATURE implementation, along with a KEYEXCH,
ASYM_CIPHER, etc implementation.
The intended design was, however, the opposite implication, i.e. that
where there is a SIGNATURE implementation, there must also be KEYMGMT.
This change reverses the logic of the code to be closer to the intended
design.
There is a consequence; we now use the query_operation_name function from
the KEYMGMT of the EVP_PKEY given by the EVP_PKEY_CTX (ultimately given by
the application). Previously, we used the query_operation_name function
from the KEYMGMT found alongside the SIGNATURE implementation.
Another minor consequence is that the |keymgmt| field in EVP_PKEY_CTX
is now always a reference to the KEYMGMT of the |pkey| field if that
one is given (|pkey| isn't NULL) and is provided (|pkey->keymgmt|
isn't NULL).
Fixes#16614
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16725)
This makes it possible to limit the search of methods to that
particular provider. This uses already available possibilities in
ossl_algorithm_do_all().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16725)
Fixes#16457
The ECDSA and DSA signature tests use Pairwise tests instead of KATS.
Note there is a seperate type used by the keygen for conditional Pairwise Tests.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16461)
These functions are part of the public API but we don't have tests
covering their usage.
They are actually implemented as macros and the absence of tests has
caused them to fall out-of-sync with the latest changes to ASN1 related
functions and cause compilation warnings.
This commit fixes the public headers to reflect these changes.
Fixes#12443
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16355)
A header file was missing but only in no-deprecated builds.
Also add some ending comments for #if preprocessor statements.
Move function declaration inside #ifdef guard for header.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16412)
Previously the length of the SM2 plaintext could be incorrectly calculated.
The plaintext length was calculated by taking the ciphertext length and
taking off an "overhead" value.
The overhead value was assumed to have a "fixed" element of 10 bytes.
This is incorrect since in some circumstances it can be more than 10 bytes.
Additionally the overhead included the length of two integers C1x and C1y,
which were assumed to be the same length as the field size (32 bytes for
the SM2 curve). However in some cases these integers can have an additional
padding byte when the msb is set, to disambiguate them from negative
integers. Additionally the integers can also be less than 32 bytes in
length in some cases.
If the calculated overhead is incorrect and larger than the actual value
this can result in the calculated plaintext length being too small.
Applications are likely to allocate buffer sizes based on this and therefore
a buffer overrun can occur.
CVE-2021-3711
Issue reported by John Ouyang.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
ASN.1 strings may not be NUL terminated. Don't assume they are.
CVE-2021-3712
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
The power up known answer test for the TLS 1.3 KDF does just the first step
to derive the "client_early_traffic_secret" using the two modes of the KDF.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/16203)
This function needs to be power up tested as part of the FIPS validation and
thus it needs to be inside the provider boundary. This is realised by
introducing a new KDF "TLS13-KDF" which does the required massaging of
parameters but is otherwise functionally equivalent to HKDF.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/16203)
Delete dtls timeout dead code in dtls1_handle_timeout
Fix: #15559
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/16151)
