This is a major overhaul of the TLSv1.3 state machine. Currently it still
looks like TLSv1.2. This commit changes things around so that it starts
to look a bit less like TLSv1.2 and bit more like TLSv1.3.
After this commit we have:
ClientHello
+ key_share ---->
ServerHello
+key_share
{CertificateRequest*}
{Certificate*}
{CertificateStatus*}
<---- {Finished}
{Certificate*}
{CertificateVerify*}
{Finished} ---->
[ApplicationData] <---> [Application Data]
Key differences between this intermediate position and the final TLSv1.3
position are:
- No EncryptedExtensions message yet
- No server side CertificateVerify message yet
- CertificateStatus still exists as a separate message
- A number of the messages are still in the TLSv1.2 format
- Still running on the TLSv1.2 record layer
Reviewed-by: Rich Salz <rsalz@openssl.org>
TLSv1.3 has a NewSessionTicket message, but it is *completely* different to
the TLSv1.2 one and may as well have been called something else. This commit
removes the old style NewSessionTicket from TLSv1.3. We will have to add the
new style one back in later.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When configured with "no-mdc2 enable-crypto-mdebug" the evp_test
will leak memory due to skipped tests, and error out.
Also fix a skip condition
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1968)
This gives better code coverage and is more representative of how a
user would likely construct an SCT (using the base64 returned by a CT log).
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1548)
ssl_test_old was reaching inside the SSL structure and changing the internal
BIO values. This is completely unneccessary, and was causing an abort in the
test when enabling TLSv1.3.
I also removed the need for ssl_test_old to include ssl_locl.h. This
required the addition of some missing accessors for SSL_COMP name and id
fields.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The previous commits put in place the logic to exchange key_share data. We
now need to do something with that information. In <= TLSv1.2 the equivalent
of the key_share extension is the ServerKeyExchange and ClientKeyExchange
messages. With key_share those two messages are no longer necessary.
The commit removes the SKE and CKE messages from the TLSv1.3 state machine.
TLSv1.3 is completely different to TLSv1.2 in the messages that it sends
and the transitions that are allowed. Therefore, rather than extend the
existing <=TLS1.2 state transition functions, we create a whole new set for
TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time
they will be amended.
The new TLSv1.3 transitions remove SKE and CKE completely. There's also some
cleanup for some stuff which is not relevant to TLSv1.3 and is easy to
remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN.
I also disable EXTMS for TLSv1.3. Using it was causing some added
complexity, so rather than fix it I removed it, since eventually it will not
be needed anyway.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Checks that the epoch_time_in_ms field of CT_POLICY_EVAL_CTX is initialized
to approximately the current time (as returned by time()) by default. This
prevents the addition of this field, and its verification during SCT
validation, from breaking existing code that calls SCT_validate directly.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1554)
The test loops through all the ciphers, attempting to test each one in turn.
However version negotiation happens before cipher selection, so with TLSv1.3
switched on if we use a non-TLSv1.3 compatible cipher suite we get "no
share cipher".
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is done by taking one vector, "corrupting" last bit of the
tag value and verifying that decrypt fails.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Send a TLS1.4 ClientHello with supported_versions and get TLS1.3
Send a TLS1.3 ClientHello without supported_versions and get TLS1.2
Reviewed-by: Rich Salz <rsalz@openssl.org>
Simple tests only need to implement register_tests().
Tests that need a custom main() should implement test_main(). This will
be wrapped in a main() that performs common setup/teardown (currently
crypto-mdebug).
Note that for normal development, enable-asan is usually
sufficient for detecting leaks, and more versatile.
enable-crypto-mdebug is stricter as it will also
insist that all static variables be freed. This is useful for debugging
library init/deinit; however, it also means that test_main() must free
everything it allocates.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Normally WPACKETs will use a BUF_MEM which can grow as required. Sometimes
though that may be overkill for what is needed - a static buffer may be
sufficient. This adds that capability.
Reviewed-by: Rich Salz <rsalz@openssl.org>
MD5/SHA1 and MDC-2 have special-case logic beyond the generic DigestInfo
wrapping. Test that each of these works, including hash and length
mismatches (both input and signature). Also add VerifyRecover tests. It
appears 5824cc2981 added support for
VerifyRecover, but forgot to add the test data.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1474
RFC 3447, section 8.2.2, steps 3 and 4 states that verifiers must encode
the DigestInfo struct and then compare the result against the public key
operation result. This implies that one and only one encoding is legal.
OpenSSL instead parses with crypto/asn1, then checks that the encoding
round-trips, and allows some variations for the parameter. Sufficient
laxness in this area can allow signature forgeries, as described in
https://www.imperialviolet.org/2014/09/26/pkcs1.html
Although there aren't known attacks against OpenSSL's current scheme,
this change makes OpenSSL implement the algorithm as specified. This
avoids the uncertainty and, more importantly, helps grow a healthy
ecosystem. Laxness beyond the spec, particularly in implementations
which enjoy wide use, risks harm to the ecosystem for all. A signature
producer which only tests against OpenSSL may not notice bugs and
accidentally become widely deployed. Thus implementations have a
responsibility to honor the specification as tightly as is practical.
In some cases, the damage is permanent and the spec deviation and
security risk becomes a tax all implementors must forever pay, but not
here. Both BoringSSL and Go successfully implemented and deployed
RSASSA-PKCS1-v1_5 as specified since their respective beginnings, so
this change should be compatible enough to pin down in future OpenSSL
releases.
See also https://tools.ietf.org/html/draft-thomson-postel-was-wrong-00
As a bonus, by not having to deal with sign/verify differences, this
version is also somewhat clearer. It also more consistently enforces
digest lengths in the verify_recover codepath. The NID_md5_sha1 codepath
wasn't quite doing this right.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1474
1) Remove some unnecessary fixtures
2) Add EXECUTE_TEST_NO_TEARDOWN shorthand when a fixture exists but has
no teardown.
3) Fix return values in ct_test.c (introduced by an earlier refactoring,
oops)
Note that for parameterized tests, the index (test vector) usually holds all the
customization, and there should be no need for a separate test
fixture. The CTS test is an exception: it demonstrates how to combine
customization with parameterization.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Prior to TLS1.3 we check that the received record version number is correct.
In TLS1.3 we need to ignore the record version number. This adds a test to
make sure we do it correctly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The sources for internal tests were sometimes badly formed, assuming
perl variables such as $target{cpuid_asm_src} contains only one file
name. This change correctly massages all file names in such a
variable.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1850)
The test fixtures are (meant to be) useful for sharing common
setup. Don't bother when we don't have any setup/teardown.
This only addresses simple tests. Parameterized tests (ADD_ALL_TESTS)
will be made more user-friendly in a follow-up.
Reviewed-by: Rich Salz <rsalz@openssl.org>
