Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20205)
https://github.com/openssl/openssl/pull/19901 backported the
"Honor OSSL_PKEY_PARAM_EC_POINT_CONVERSION_FORMAT as set and default to
UNCOMPRESSED" changeset to 3.0.
This commit updates:
- the HISTORY notes of the relevant documentation to mark the change
happened since 3.0.8.
- the `CHANGES.md file` to sync up with the tip of the `openssl-3.0`
branch
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20003)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19271)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13817)
FIPS 186-4 section 5 "The RSA Digital Signature Algorithm", subsection
5.5 "PKCS #1" says: "For RSASSA-PSS […] the length (in bytes) of the
salt (sLen) shall satisfy 0 <= sLen <= hLen, where hLen is the length of
the hash function output block (in bytes)."
Introduce a new option RSA_PSS_SALTLEN_AUTO_DIGEST_MAX and make it the
default. The new value will behave like RSA_PSS_SALTLEN_AUTO, but will
not use more than the digest length when signing, so that FIPS 186-4 is
not violated. This value has two advantages when compared with
RSA_PSS_SALTLEN_DIGEST: (1) It will continue to do auto-detection when
verifying signatures for maximum compatibility, where
RSA_PSS_SALTLEN_DIGEST would fail for other digest sizes. (2) It will
work for combinations where the maximum salt length is smaller than the
digest size, which typically happens with large digest sizes (e.g.,
SHA-512) and small RSA keys.
J.-S. Coron shows in "Optimal Security Proofs for PSS and Other
Signature Schemes. Advances in Cryptology – Eurocrypt 2002, volume 2332
of Lecture Notes in Computer Science, pp. 272 – 287. Springer Verlag,
2002." that longer salts than the output size of modern hash functions
do not increase security: "For example,for an application in which at
most one billion signatures will be generated, k0 = 30 bits of random
salt are actually sufficient to guarantee the same level of security as
RSA, and taking a larger salt does not increase the security level."
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19724)
Fixes openssl#19771
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19787)
Originally the code to im/export the EC pubkey was meant to be consumed
only by the im/export functions when crossing the provider boundary.
Having our providers exporting to a COMPRESSED format octet string made
sense to avoid memory waste, as it wasn't exposed outside the provider
API, and providers had all tools available to convert across the three
formats.
Later on, with #13139 deprecating the `EC_KEY_*` functions, more state
was added among the params imported/exported on an EC provider-native
key (including `OSSL_PKEY_PARAM_EC_POINT_CONVERSION_FORMAT`, although it
did not affect the format used to export `OSSL_PKEY_PARAM_PUB_KEY`).
Finally, in #14800, `EVP_PKEY_todata()` was introduced and prominently
exposed directly to users outside the provider API, and the choice of
COMPRESSED over UNCOMPRESSED as the default became less sensible in
light of usability, given the latter is more often needed by
applications and protocols.
This commit fixes it, by using `EC_KEY_get_conv_form()` to get the
point format from the internal state (an `EC_KEY` under the hood) of the
provider-side object, and using it on
`EVP_PKEY_export()`/`EVP_PKEY_todata()` to format
`OSSL_PKEY_PARAM_PUB_KEY`.
The default for an `EC_KEY` was already UNCOMPRESSED, and it is altered
if the user sets `OSSL_PKEY_PARAM_EC_POINT_CONVERSION_FORMAT` via
`EVP_PKEY_fromdata()`, `EVP_PKEY_set_params()`, or one of the
more specialized methods.
For symmetry, this commit also alters `ec_pkey_export_to()` in
`crypto/ec/ec_ameth.c`, part of the `EVP_PKEY_ASN1_METHOD` for legacy EC
keys: it exclusively used COMPRESSED format, and now it honors the
conversion format specified in the EC_KEY object being exported to a
provider when this function is called.
Expand documentation about `OSSL_PKEY_PARAM_PUB_KEY` and mention the
3.1 change in behavior for our providers.
Fixes#16595
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19681)
(cherry picked from commit 926db476bc)
This supports all the modes, suites and export mechanisms defined
in RFC9180 and should be relatively easily extensible if/as new
suites are added. The APIs are based on the pseudo-code from the
RFC, e.g. OSS_HPKE_encap() roughly maps to SetupBaseS(). External
APIs are defined in include/openssl/hpke.h and documented in
doc/man3/OSSL_HPKE_CTX_new.pod. Tests (test/hpke_test.c) include
verifying a number of the test vectors from the RFC as well as
round-tripping for all the modes and suites. We have demonstrated
interoperability with other HPKE implementations via a fork [1]
that implements TLS Encrypted ClientHello (ECH) which uses HPKE.
@slontis provided huge help in getting this done and this makes
extensive use of the KEM handling code from his PR#19068.
[1] https://github.com/sftcd/openssl/tree/ECH-draft-13c
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17172)
TLS device offload allows to perform zerocopy sendfile transmissions.
FreeBSD provides this feature by default, and Linux 5.19 introduced it
as an opt-in. Zerocopy improves the TX rate significantly, but has a
side effect: if the underlying file is changed while being transmitted,
and a TCP retransmission happens, the receiver may get a TLS record
containing both new and old data, which leads to an authentication
failure and termination of connection. This effect is the reason Linux
makes a copy on sendfile by default.
This commit adds support for TLS zerocopy sendfile on Linux disabled by
default to avoid any unlikely backward compatibility issues on Linux,
although sacrificing consistency in OpenSSL's behavior on Linux and
FreeBSD. A new option called KTLSTxZerocopySendfile is added to enable
the new zerocopy behavior on Linux. This option should be used when the
the application guarantees that the file is not modified during
transmission, or it doesn't care about breaking the connection.
The related documentation is also added in this commit. The unit test
added doesn't test the actual functionality (it would require specific
hardware and a non-local peer), but solely checks that it's possible to
set the new option flag.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18650)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19565)
The latest kernel (including stable kernel) has fixed the issue
of decryption failure in CCM mode in TLS 1.3. It is necessary to
reenable CCM mode for KTLS.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17207)
Fixes#19488
Use the correct OSSL_PKEY_PARAM_RSA CRT names fior the self tests.
The invalid names cause CRT parameters to be silently ignored.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19501)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19375)
Partially revamped from #16712
- fall thru -> fall through
- time stamp -> timestamp
- host name -> hostname
- ipv6 -> IPv6
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19059)
3.1 has been decided to be a FIPS 140-3 release, springing from the branch
openssl-3.0, and the master branch to continue with the development of
OpenSSL 3.2.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19350)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18833)
Longer private key sizes unnecessarily raise the cycles needed to
compute the shared secret without any increase of the real security.
We use minimum key sizes as defined in RFC7919.
For arbitrary parameters we cannot know whether they are safe
primes (we could test but that would be too inefficient) we have
to keep generating large keys.
However we now set a small dh->length when we are generating safe prime
parameters because we know it is safe to use small keys with them.
That means users need to regenerate the parameters if they
want to take the performance advantage of small private key.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18480)
Fixed#18489
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18550)
This removes a guard condition that prevents KTLS being enabled for
receiving in TLS 1.3. Use the correct sequence number and BIO for
receive vs transmit offload.
Co-authored-by: John Baldwin <jhb@FreeBSD.org>
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17942)
Provide a different mechanism to indicate that the application wants
to retry the verification. The negative result of the callback function
now indicates an error again.
Instead the SSL_set_retry_verify() can be called from the callback
to indicate that the handshake should be suspended.
Fixes#17568
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17825)
Supports Linux, MacOS and FreeBSD
Disabled by default, enabled via `enabled-tfo`
Some tests
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8692)
Co-authored-by: Matthias St. Pierre <matthias.st.pierre@ncp-e.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/17714)
Fixed the date in the heading of "Changes between 1.1.1l and 1.1.1m" to 14 Dec 2021
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/17714)
The function/macro allow user get groups/extensions without memory allcations.
So we could calculate the ssl fignerprint(ja3) in low cost.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16910)
