The test_cmp_cli was failing in the extended tests on cross-compiled
mingw builds. This was due to the test not using wine when it should do.
The simplest solution is to just skip the test in this case.
[extended tests]
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12555)
The only reason we should fallback to legacy codepaths in DigestSignInit/
DigestVerifyInit, is if we have an engine, or we have a legacy algorithm
that does not (yet) have a provider based equivalent (e.g. SM2, HMAC, etc).
Currently we were falling back even if we have a suitable key manager but
the export of the key fails. This might be for legitimate reasons (e.g.
we only have the FIPS provider, but we're trying to export a brainpool key).
In those circumstances we don't want to fallback to the legacy code.
Therefore we tighten then checks for falling back to legacy. Eventually this
particular fallback can be removed entirely (once all legacy algorithms have
provider based key managers).
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12550)
Minor changes to `custom_generator_test`:
- this is to align to the 1.1.1 version of the test (simplify the code
as there is no need to use `EC_GROUP_get_field_type()`)
- add comment to explain how the buffer size is computed
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12507)
This commit adds a new test (run on all the built-in curves) to create
`EC_GROUP` with **unknown** *explicit parameters*: from a built-in group
we create an alternative group from scratch that differs in the
generator used.
At the `EC_GROUP` layer we perform a basic math check to ensure that the
math on the alternative group still makes sense, using comparable
results from the origin group.
We then create two `EC_KEY` objects on top of this alternative group and
run key generation from the `EC_KEY` layer.
Then we promote these two `EC_KEY`s to `EVP_PKEY` objects and try to
run the derive operation at the highest abstraction layer, comparing
results in both directions.
Finally, we create provider-native keys using `EVP_PKEY_fromdata` and
data derived from the previous objects, we compute an equivalent shared
secret from these provider keys, and compare it to the result obtained
from the previous steps.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12507)
The locking was too fine grained when adding entries to a namemap.
Refactored the working code into unlocked functions and call these with
appropriate locking.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12545)
A recently added certificate in test/certs expired causing test_verify to fail.
This add a replacement certificate with a long expiry date.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12549)
Fix EVP_EncodeBlock description using incorrect parameter name for encoding length
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12518)
This adds legacy PEM variants of already existing tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12410)
This adds variants of already existing tests, but where the object
is encrypted / decrypted along the way as well.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12410)
This implements these functions:
OSSL_DESERIALIZER_CTX_set_cipher()
OSSL_DESERIALIZER_CTX_set_passphrase()
OSSL_DESERIALIZER_CTX_set_passphrase_ui()
OSSL_DESERIALIZER_CTX_set_passphrase_cb()
To be able to deal with multiple deserializers trying to work on the
same byte array and wanting to decrypt it while doing so, the
deserializer caches the passphrase. This cache is cleared at the end
of OSSL_DESERIALIZER_from_bio().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12410)
Serialization will only encrypt, so there's no point telling
OSSL_SERIALIZER_CTX_set_passphrase_cb() that's going to happen.
We fix the declaration of OSSL_DESERIALIZER_CTX_set_passphrase_cb()
the same way.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12410)
This test revolves around a central function that will first serialize
an EVP_PKEY, then deserialize the result into a new EVP_PKEY and
compare the two.
The following tests are currently implemented:
1. EVP_PKEY (RSA) -> DER, then DER -> EVP_PKEY (RSA).
2. EVP_PKEY (RSA) -> PEM, then PEM -> EVP_PKEY (RSA).
This one exercises deserializer chains, as we know that there is a
PEM -> DER and a DER -> EVP_PKEY (RSA) deserializer, but no direct
PEM -> EVP_PKEY (RSA) deserializer.
Additionally, a small fix in test_fail_string_common(), as strcmp()
could run past a buffer if one of the strings isn't terminated with
a null byte within the given length.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12410)
EVP_PKEY is the fundamental type for provider side code, so we
implement specific support for it, in form of a special context
constructor.
This constructor looks up and collects all available KEYMGMT
implementations, and then uses those names to collect deserializer
implementations, as described in the previous commit.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12410)
This adds a method OSSL_DESERIALIZER, a deserializer context and basic
support to use a set of serializers to get a desired type of data, as
well as deserializer chains.
The idea is that the caller can call OSSL_DESERIALIZER_CTX_add_serializer()
to set up the set of desired results, and to add possible chains, call
OSSL_DESERIALIZER_CTX_add_extra(). All these deserializers are pushed
on an internal stack.
The actual deserialization is then performed using functions like
OSSL_DESERIALIZER_from_bio(). When performing deserialization, the
inernal stack is walked backwards, keeping track of the deserialized
data and its type along the way, until the data kan be processed into
the desired type of data.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12410)
This function is used to create a keydata for a key that libcrypto
only has a reference to.
This introduces provider references, the contents which only the
provider know how to interpret. Outside of the provider, this is just
an array of bytes.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12410)
This makes the following functions available for libcrypto code:
evp_keymgmt_util_try_import() - callback function
evp_keymgmt_util_assign_pkey() - assigns keymgmt and keydata to an EVP_PKEY
evp_keymgmt_util_make_pkey() - creates an EVP_PKEY from keymgmt and keydata
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12410)
- In order to not add many X509_XXXX_with_libctx() functions the libctx and propq may be stored in the X509 object via a call to X509_new_with_libctx().
- Loading via PEM_read_bio_X509() or d2i_X509() should pass in a created cert using X509_new_with_libctx().
- Renamed some XXXX_ex() to XXX_with_libctx() for X509 API's.
- Removed the extra parameters in check_purpose..
- X509_digest() has been modified so that it expects a const EVP_MD object() and then internally it does the fetch when it needs to (via ASN1_item_digest_with_libctx()).
- Added API's that set the libctx when they load such as X509_STORE_new_with_libctx() so that the cert chains can be verified.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12153)
Added RSA oaep test that uses the pkeyutl application.
Added an openssl application option to support loading a (fips) provider via the '-config' option.
Added openssl application related environment variable 'OPENSSL_TEST_LIBCTX' (for testing purposes only),
that creates a non default library context.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11948)
The RAND_DRBG callbacks are wrappers around the EVP_RAND callbacks.
During uninstantiation, the EVP_RAND callbacks got lost while the
RAND_DRBG callbacks remained, because RAND_DRBG_uninstantiate()
calls RAND_DRBG_set(), which recreates the EVP_RAND object.
This was causing drbgtest failures.
This commit fixes the problem by adding code to RAND_DRBG_set() for
saving and restoring the EVP_RAND callbacks.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11195)
It's the generate counter (drbg->reseed_gen_counter), not the
reseed counter which needs to be raised above the reseed_interval.
This mix-up was partially caused by some recent renamings of DRBG
members variables, but that will be dealt with in a separate commit.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11195)
The behaviour of RAND_DRBG_generate() has changed. Previously, it
would fail for requests larger than max_request, now it automatically
splits large input into chunks (which was previously done only
by RAND_DRBG_bytes() before calling RAND_DRBG_generate()).
So this test has not only become obsolete, the fact that it succeeded
unexpectedly also caused a buffer overflow that terminated the test.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11195)
The reseed counter condition was broken since a93ba40, where the
initial value was wrongly changed from one to zero.
Commit 8bf3665 fixed the initialization, but also adjusted the check,
so the problem remained.
This change restores original (OpenSSL-fips-2_0-stable) behavior.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11195)
The condition in test_error_checks() was inverted, so it succeeded
as long as error_check() failed. Incidently, error_check() contained
several bugs that assured it always failed, thus giving overall drbg
test success.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11195)
Removed dummy evp_test
Changed all algorithm properties to use fips=yes (except for RAND_TEST) (This changes the DRBG and ECX settings)
Removed unused includes.
Added TODO(3.0) for issue(s) that need to be resolved.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12498)
CLA: trivial
I found that when I wanted to use an engine by the option-engine XXX , it didn't work. Checking the code, I guess it missed the engine pointer when calling EVP_CipherInit_ex.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12475)
This change applies the recommendation of the Linux Documentation Project
to the documentation files of OpenSSL. Additionally, util/find-doc-nits
was updated accordingly.
The change follows a suggestion of mspncp on https://github.com/openssl/openssl/pull/12370
and incoporates the requested changes on the pull request
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12460)
